F-22 for Falcon BMS Creator: Fabrizio Fraccaroli. Myself.
-
more pics…
-
and more pics… the last for now…
-
Hmm at lease you got to see the black skin I was talking about now. Is it possible to get those other MFDS too work so We can get an RWR in there? And I know on the one MFD it has Jammer there but it doesn’t inform you if the jammer is on or not like the F-16 has that green light. I can never keep track if its on or not after getting into a dogfight
-
can you skin the pilot with the updated HMCS helmet?
-
Nice effort. It´s looking promising.
-
Hmm at lease you got to see the black skin I was talking about now. Is it possible to get those other MFDS too work so We can get an RWR in there? And I know on the one MFD it has Jammer there but it doesn’t inform you if the jammer is on or not like the F-16 has that green light. I can never keep track if its on or not after getting into a dogfight
Hello ScRaPeD, and thanks for your reply.
I found this error about the texture before I release the F22 beta tester version, that picture Is old, I just forgott to make you know about IT.
4 mfd’s… I am almost “crazy” trying to find a way to make them work, all in vain.
Jammer… there is a simbol informing you that the jammer is on, I believe the first version that you have, has it simbol. Tomorow I will put a picture for you, but be aware that I am not happy with the result of It’s location, and I am looking for another location for this simbol. I will also change the location of the JFS switch, and all changes will be updated in the manual, don’t be worried.
About the engine feed knob in the F22, I wrote about it, in the manual, but I wrote “fuel pump”, instead of “engine feed”.Now, I want to talk about the goals I have achieved…
The exaust heat and afterburner flame, are working very nice.
I disabled all the weapons bay because there are only 5 F4-switch, and 5 F4-dofs for animating them. The F22 has only 4 weapons bay, 3 if we count the under (bottom) bay as only one. Ok till here… but inside the cockpit, we command the weapons bay through the “SMS” page choosing the slots. When we choose the slots number “2” and “4” the weapons bay open… but when we choose the slots number “3”, “5”, “6” and above, they don’t move. don’t rotate. I could not find any way to meke them work very well, so I disabled all of them. ( anyway they would not work very well, because the missiles are launched from the middle of the aircraft).
There are more updates I will show the pictures tomorrow.
Best regards
Metalhead -
can you skin the pilot with the updated HMCS helmet?
Sorry I did not understand the question…
-
Scorpion Helmet even though the F-22 will probobly get the F-35 helmet in the future. I just don’t think BMS is ready for that beast, Baby steps.
-
Scorpion Helmet even though the F-22 will probobly get the F-35 helmet in the future. I just don’t think BMS is ready for that beast, Baby steps.
I will try, but it’s not a promise
-
You canot have HMCS in the F22. Sadly the pit is to small and there is other constraints… No Aim 9x either. I worked this bird for the last 7 years and was hoping to see it but problem arose.
-
NO AIM9x what madness is this. Surley they will be the helmet eventually. I was told the F-35 Helmet was to be implemented into it at some point. But you work on em so I take your word.
-
Dont count on it.
-
Dont count on it.
Hi well,
Lets get some help on this so the JHMCS and AIM9X works and believe it can be done by those in community especially since 90% of the F-22A A/C is already done!
Most importantly it is a “F4 Dogfighter’s Dream” to fly this beast, its a must, “PLEASE”!
Janhas has the F-35 for BMS with Pilot Helmet maybe he is a good source of help here regarding JHMCS ……
More here …… https://www.benchmarksims.org/forum/showthread.php?5503-OF-mods-JanHas-realism-patch&p=98147&viewfull=1#post98147
Also I noticed in thread Biker, Wavey Dave and 611-Eagle are willing to help…… so it shouldn’t be that hard to get it done.
So its a must the F-22A must fly with its intent…patience, Metalhead along with community help will see it gets done perfectly, support him.
I certainly would love to fly the F-22A and in say 10 years time maybe source the flight model data for the F-22A beast to be a Hi-fi A/C in BMS certainly not now, and I’m not fussed if it uses F-16 FM, just as long as I can use it in Dogfights with JHMCS and Aim9x’s is enough for now as variety in sim… So please gents help this be a success for all community.
Thanks,
SkyKnight
-
You canot have HMCS in the F22. Sadly the pit is to small and there is other constraints… No Aim 9x either. I worked this bird for the last 7 years and was hoping to see it but problem arose.
did you work in either real aircraft, or 3d model F22?
-
Hello all.
I have been working in the 3d model in these last two days trying to reduce the amout of polygons in the aircraft, and the result I got is around 60000 (sixty Thousands). I cannot reduce it less than this, or it will be very “ugly”.
I am trying to make the “wing vapour”, but I do not know what “Ptype” it shoud be, any suggestion?
611-eagle said that the animations in the “landing gears” need to be enhanced, would you like to try enhance it, Cemil?
Anyone knows how to activate the "mfds three and four?
I am almost finishing here, I do not know what more need to be done, not with the “tools” I have available at the moment. I have too many “ideas” for incrementing the “PIT”, but not “how to”
Best regardsMetalhead
-
Hello all.
I have been working in the 3d model in these last two days trying to reduce the amout of polygons in the aircraft, and the result I got is around 60000 (sixty Thousands). I cannot reduce it less than this, or it will be very “ugly”.
I am trying to make the “wing vapour”, but I do not know what “Ptype” it shoud be, any suggestion?
611-eagle said that the animations in the “landing gears” need to be enhanced, would you like to try enhance it, Cemil?
Anyone knows how to activate the "mfds three and four?
I am almost finishing here, I do not know what more need to be done, not with the “tools” I have available at the moment. I have too many “ideas” for incrementing the “PIT”, but not “how to”
Best regardsMetalhead
Wing vapors, you can use alpha textured a part like this : http://farm5.staticflickr.com/4148/5035331979_1215e373f0_o.jpg
enhance it, sure can i do but need max file… -
Hi Metalhead,
How is it going just catching up with this thread…… I just cant wait to use JHMCS in this beast with some AIM9x’s shooting down some SU-27’s… or some tight mean gun action…nice.
Well some encouragement for this beast…
Cant wait going to be a good Christmas …… Hehehehehe : )
Hey I wonder if the flight model could be tweaked a bit to look more realistic thru some testing in maneuverability going by videos and on the thrust vectoring nozzles to perform High G turns, Kulbit Flips and Cobras etc… can the DEVS make or allow this to be possible…how hard would it be to change the values slightly.
I mean Dogfighters dream or what…just cant wait!
Hopefully in less than 10 years time true FM data can be found on the F-22A that would be tremendously exciting, making this model a Hi-Fidelity A/C for a simulator like BMS F4 !
Well we wait and see!
Well Thanks variety is good…just dying to fly this in BMS F4! :headb:
Falcon History now…keep up the good work my friend!
Cheers,
:drink:
-
@611-eagle:
Wing vapors, you can use alpha textured a part like this : http://farm5.staticflickr.com/4148/5035331979_1215e373f0_o.jpg
enhance it, sure can i do but need max file…I’ll send it to you, but I need to recover all the files that are locked inside my computer. Some problem ocuured in it and I will need to format it, I am looking for a way to recover the files before the formating, or We will lost the files, and I will heve to start e=verything from the beginning.
Wait, I will find a solution for this.
Best regards.
Metalhead -
@SkyKnight:
Hi Metalhead,
How is it going just catching up with this thread…… I just cant wait to use JHMCS in this beast with some AIM9x’s shooting down some SU-27’s… or some tight mean gun action…nice.
Well some encouragement for this beast…
Cant wait going to be a good Christmas … Hehehehehe : )
Hey I wonder if the flight model could be tweaked a bit to look more realistic thru some testing in maneuverability going by videos and on the thrust vector nozzles to perform High G turns and Kulbit Flips and Cobras etc… can the DEVS make or allow this to be possible…how hard would it be to change the values slightly…I mean Dogfighters dream or what…just cant wait!
Hopefully in less than 10 years time true FM data can be found on the F-22A that would be tremendously exciting, making this model a Hi-Fidelity A/C for a simulator like BMS F4 !
Well we wait and see!
Well Thanks variety is good…just dying to fly this in BMS F4! :headb:
Falcon History now…keep up the good work my friend!
Cheers,
:drink:
Thanks for your reply. The work is almost done, there are many things to be done, but I do not know how to. The HMCS, is working very well, you will enjoy it very much. But I have a bad news for now, and I hope fix it quick.
Some error happened in my computer, and I need to format it. All the 3d models are inside the documents and settings folder, and I do not know how to get them back before format the computer. I will try to open the H Drive with other computer, and try to save the content of the folder.
I was almost releasing a new version reduced the number of polygons, and the updated cockpit.
Well, let’s “pray” to be everything OK.
Best regards
Metalhead -
Can’t you take what we already have out and continue to work on that in the worst case scenario?