KEYSPEECH PROFILES- FOR ALL CALLSIGNS!!!!
-
@Icewind If you want to use english profile, Windows must switch to english, then train your Windows Recognition profile, then revert back to your language. KeySpeech uses the default Windows Recognition profile. If you want to check which Windows Recognition profile is used by KeySpeech: go to Windows taskbar, then right click on KeySpeech’s icon, then click on About (first item) and you’ll see the profile name under User profile’s label.
-
Thanks you so much guys !!! It works !!
Today, I started my computer, I executed Vistalizator, and English was already installed. I clicked on the “change language” button, it asked me if I would like to change to English and I accepted. I clicked on the exit button and it asked me if I wanted to restart my computer now. I accepted, and pc rebooted. After few seconds, windows appeared, I wrote my password and then, I had windows in English !!!
I checked in voice recognition panel, and I can train my profile in English.
@Windblow : Thanks for the tool, nothing was possible without vistalizator, and after some research, I found nothing to change my OS language, since I have just an home premium version. THANKS !
@Keyspeech : Thanks for these details ! Yesterday I thought that I have to stay in English to use my profile. But you said that after my profile’s training, I can switch back to French. It’s very interressant and I will do that.
-
I’m trying to use keyspeech, but I have no success with it… I did 7 or 8 training sessions. I set a joystick button as a Push to talk, I activate Keyspeech, I load a profile, and I try to say some commands when I’m in Falcon, while pressing the push to talk. But nothing happens. I tried to speak louder, speak slowly, but nothing.
I set the accuracy slider to 95% and I checked the box to save at the next start. I verified that Keyspeech uses the profile which I trained.
I tried to open notepad, and check “Enable syntheside voice”, and when I say some phrases, nothing happens…
Have you got any idea ?
-
@Icewind Higher value of the accuracy slider mean that pronunciation needs to be perfect (according to your Windows Recognition Profile), so you can start with value 0, then move accuracy value gradually. Also make sure that your profile is selected in Settings screen : go to Windows taskbar, right click on KeySpeech’s icon, then select Settings item and go to Profile tab.
-
Thanks for your help !
It works very fine now !! My accuracy slider is set on 70. I have 79 % of success, and I hope it will improve with time.
I will buy it without hesitation. It’s an amazing tool and profiles are great !
-
Thanks for your help !
It works very fine now !! My accuracy slider is set on 70. I have 79 % of success, and I hope it will improve with time.
I will buy it without hesitation. It’s an amazing tool and profiles are great !
Very good ! [emoji1][emoji106]
Average accuracy value can help you to adjust accuracy slider value. To see the average : go to Windows taskbar and move the cursor over KeySpeech’s icon and you will see this value in the balloon tip.
-
Yep I read it with your method.
When I would have enough experience with Keyspeech, I will adjust the accuracy slider with the average accuracy value like you said.
Thank you very much for your advice !
-
Thanks for your help !
It works very fine now !! My accuracy slider is set on 70. I have 79 % of success, and I hope it will improve with time.
I will buy it without hesitation. It’s an amazing tool and profiles are great !
I am an above average non native speaker and the highest number that works for me is 92%.
And I only set it so high because it is important to use the highest possible when using keyspeech during online flying to avoid false positives. -
Important note, you must speak as naturally as possible when you train your voice recognition profile. The goal is not to try to pronounce the words with a different accent, but yours. This is true for every software using Windows Recognition Engine.
-
Yes I did trainings with my accent
Keyspeech works very well ! I will do some trainings again to improve recognition.
I have to learn a maximum of phrases, but they are quite intuitive and it’s easy to find the phrase which correspond to the command we want to execute.
Keyspeech is a very good tool and profiles are… wow ! AMAZING job !
-
Can someone help me troubleshoot this? I setup my VA profile, setup keyspeech all profiles load as shown in the tutorials, all settings per tutorial and then when inside Falcon BMS with a flight I do commands and it doesn’t respond at all. Where am I missing a step?! Thank you!
-
Love this Program and thanks for the profile.
cheers
Sting
-
@TeC:
Can someone help me troubleshoot this? I setup my VA profile, setup keyspeech all profiles load as shown in the tutorials, all settings per tutorial and then when inside Falcon BMS with a flight I do commands and it doesn’t respond at all. Where am I missing a step?! Thank you!
Sorry I missed this post.
Hope it’s not too late.
First question,
Does keyspeech work out of bms?
I suggest that:
1-you activate the synthesized voice to check if commands are recognized
2-you use a program like notepad to check that key strokes ate sent by KS.That’s the first step of your troubleshooting.
First we need to assess whether or not KS works in your computer at all.
once we know for sure that speech recognition works, then we can look into bms with detail.
-
Sorry I missed this post.
Hope it’s not too late.
First question,
Does keyspeech work out of bms?
I suggest that:
1-you activate the synthesized voice to check if commands are recognized
2-you use a program like notepad to check that key strokes ate sent by KS.That’s the first step of your troubleshooting.
First we need to assess whether or not KS works in your computer at all.
once we know for sure that speech recognition works, then we can look into bms with detail.
Same kind of problem here. I’ ve been used VAC without probs, but can’t get Keyspeech work. Accuracy is changing while I speak, but no reaction in Notepad or BMS. Your profile is great work with more real commands so I really wanted to get this work. Maybe I have missed some simple step.
Thanks
Samuel
-
May you create another KeySpeech shortcut, and right click on this shortcut, then click on Properties menu item.
Then add -d (space + minus + d) at the end of the path into Target box as show in the image below :
Double click on this shortcut to start KeySpeech, then execute a couple voice command.
Open KeySpeech.log, do you see : Push to talk enabled and Push to talk disabled ?
Thank.
-
Yes, there is “push to talk enabled” and “push to talk disabled” when I talk first time, but when I try second time, there is only “push to talk enabled” and after that no changes in logfile.
There is also long delay in hotkey press as I try it in BMS or in Foxy key test. It keeps key pressed 3-4 seconds after button release. This happens only when Keyspeech is enabled. -
@Metso77 Do you have the same behavior if you run KeySpeech only and using keyboard keys ? What is your OS ? I don’t know if somebody has Foxy here …
Now may you check without command line (-d, default shortcut) and KeySpeech only with Notepad or with Voice Command Tester On.
-
@Metso77 Do you have the same behavior if you run KeySpeech only and using keyboard keys ? What is your OS ? I don’t know if somebody has Foxy here …
Now may you check without command line (-d, default shortcut) and KeySpeech only with Notepad or with Voice Command Tester On.
Yes, same behaviour with keyboard. Hotkey works normally until I’ve talked first time, after that delay occurs. When I exit Keyspeech, behaviour returns normal again.
I’ve programmed Hotas Cougar buttons with Foxy. My OS is WIN7 Home Premium 64bit. -
Yes, same behaviour with keyboard. Hotkey works normally until I’ve talked first time, after that delay occurs. When I exit Keyspeech, behaviour returns normal again.
I’ve programmed Hotas Cougar buttons with Foxy. My OS is WIN7 Home Premium 64bit.May you give me your profile and it occur only with a particular command ? I’ll check. Thank.
-
May you give me your profile and it occur only with a particular command ? I’ll check. Thank.
I’m using jcenzano’s profile from the first post of this thread and haven’t made any changes for it. I’ve used several different commands for testing and result is same.
I don’t think that problem is in profile but between my system and Keyspeech.