BMS 000- Benchmark Test Results.
-
In my case there is a noticeable diference between enabling multisample at 0 level and not at all, so, it must be the first step of the scale.-
For example, the Hud frame zigzag dissapearsHmm thanx, good to know. I thought 0 was like disabled.
Sent from my SAMSUNG-SM-T818A using Tapatalk
-
Was getting below 60 FPS on 4.34 benchmark and in campaign which is unacceptable for most PC gamers in 2019 with a decent mid range gaming PC.
Turned off shadow mapping in config now getting above 60. Everything else maxed AF 16x AA 8x in nvidia control panel.
4.33 above 60 with shadow mapping on even in campaign, 4.34 not.
-
BMS 000 Benchmark results
AMD Ryzen 5 3.4 MHz
16Gb RAM
Windows 10 Home installed to 100Gb SSD with page file
Falcon BMS installed to 500 Gb SSD
MSI GTX 1070 with MSI burner over clocking
Samsung 43” 4kTV (main display)
2nd display 22” 1920x1080 (MFD Exports)At 2560 x 1440 (1440p) I get 50-60 FPS on the taxi way and above the clouds FPS is >60. With TGP on I get a 10 FPS performance hit.
At 4k I get 30-40 FPS on the taxi way and above the clouds is 40-50FPS. With TGP on FPS is around 30
These are rough numbers but within the range.
What kills me is that this sim has a dated graphics engine and is still making the GPU struggle. These newer GFX cards should be ripping through these frames, but I guess part of the problem is that the sim can’t be optimized any more than what the graphics engine will allow.
Sent from my iPad using Tapatalk
-
My BMS-000 Benchmark Results
System Specs:
AMD Ryzen 5 3600 @ 4.0 GHz
32 GB 2 X Cruical BLS16G4D32AESC DDR4-3200
Samsung 970EVO Plus 500GB NVMe
MSI GTX 1660TI
LG 24’’ GSM5AB8 IPS @ 1080p
Opentrack, PS3Eye, LED Clip
Falcon BMS 4.34 -windowed mode
Windows 10 -1903 (Game mode turned off)BMS Config and Nvidia settings as in attachments
| | TGP off | TGP on |
| RAMP | 57 - 66 | |
| Taxi | 57-70 | 40-55 |
| Runway | 57-60 | 42-49 |
| below clouds | > 80 | 60-68 |
| above clouds | > 80 | 68-78 |Regards oakdesign
-
My BMS-000 Benchmark Results
Just on my new system that arrived today!
System Specs:
Intel -7-9700KF
16GB DDR4 3200MHZ 2x8GB CL16
NVIDIA RTX 2800 SuperDisplays
AOC CU34G2X 34" Ultra Wide @ 1440P
2x 10" screens for MFD @ 1024x768TrackIR
RTTRemote (Only MFD’s)
Falcon BMS 4.34 -window modeBMS Config and Nvidia settings as in attachments
Started at runway looking straight forward
Without TGP: 49
With TGP: 39Any suggestions? With G-Sync compatible it’s pretty smooth!
-
Excuse my ignorance, but where would I find this “BMS-000 Benchmark” mission?
-
In the TE Saved mission section
-
My BMS-000 Benchmark Results
Just on my new system that arrived today!
System Specs:
Intel -7-9700KF
16GB DDR4 3200MHZ 2x8GB CL16
NVIDIA RTX 2800 SuperDisplays
AOC CU34G2X 34" Ultra Wide @ 1440P
2x 10" screens for MFD @ 1024x768TrackIR
RTTRemote (Only MFD’s)
Falcon BMS 4.34 -window modeBMS Config and Nvidia settings as in attachments
Started at runway looking straight forward
Without TGP: 49
With TGP: 39Any suggestions? With G-Sync compatible it’s pretty smooth!
Yes leave all nvidia settings to application controlled. In falcon gfx set multisampling at 2 or get a 2080ti if you want higher fps. I believe you r just fine.
Sent from my SAMSUNG-SM-T818A using Tapatalk
-
Yes leave all nvidia settings to application controlled. In falcon gfx set multisampling at 2 or get a 2080ti if you want higher fps. I believe you r just fine.
Sent from my SAMSUNG-SM-T818A using Tapatalk
Thanks Arty! I will try this evening. I followed the advice from this guide: https://www.benchmarksims.org/forum/showthread.php?29750-Good-Quality-and-Good-Performance-Guide-NVIDIA
This guide suggests enabling all the settings from the NVIDIA Control Panel. Do you have different experiences or is that topic outdated with 4.34.
EDIT
I tried it and with the NVIDIA settings all to set to default and Anti Aliasing set to 3 and Anisotropic Filtering enabled i got:
53 on the runway looking straight ahead without TGP
43 on the runway looking straight ahead without TGP -
Thanks Arty! I will try this evening. I followed the advice from this guide: https://www.benchmarksims.org/forum/showthread.php?29750-Good-Quality-and-Good-Performance-Guide-NVIDIA
This guide suggests enabling all the settings from the NVIDIA Control Panel. Do you have different experiences or is that topic outdated with 4.34.
EDIT
I tried it and with the NVIDIA settings all to set to default and Anti Aliasing set to 3 and Anisotropic Filtering enabled i got:
51 on the runway looking straight ahead without TGP
40 on the runway looking straight ahead without TGPTurn off shadow mapping and put clouds on medium in config, worked for me.