@foxster
Thanks very much that you care about this.
I have many logs in the folder named above.
This log file is only created when trying to save changes but there are log fiels from freezes and crashs too that have different texts. But I cant understand these log files. I will send it to you of course!
Thanks again. Without your foxvox BMS looses much much fun!
Latest posts made by jojojung
-
RE: FoxVox Free voice control software for BMS
-
RE: FoxVox Free voice control software for BMS
@foxster cant tell because its a hole new PC. With the old PC Foxvox runns without problems, but it was an older version.
changing the ppt buttons to another joystick doesnt fix the problem. I tried with TM Worthog and TM Cougar. Same problem.
I can show you on discord if you are interessted. It seems like the programm has an overdose of workload because the slow response and the full circle loading mouse symbol is there all the time. But only in foxvox. Sliding with the mouse to the second monitor (f.e. here in the browser) there are no problems at all. CPU workload is 3%, RAM 15%, SSD 0%.When I let it load for 10 minutes sometimes it get out of the loading circle. When I made a change in the libary f.e. the new PTT buttons and try to save I cant click the buttons cancel, yes or no and the program shows this massage.
-
RE: FoxVox Free voice control software for BMS
Hey Foxter,
sorry about asking again but with my new PC (Win10, Ryzen 7 7800x3d and 4090) foxvox 2.4.1 is running very terrible.
No other programms are open. When open the program it reacts super slow. Mouse is moving normaly but when I click on a button or push the ptt button on the joystick it takes some seconds to get the green wheel and the programm is listening. sometimes it does not react for some minutes and the mouse is showing the loading circle, often it freezes in this state. Sometimes it closes it self. Mostly it crashes. Something is wrong, any idea? It looks like it gets worst everytime i give it another try. When I click on open it takes some seconds to show the explorer window which is building up its buttons and elements slowly. Mostly it freezes at that moment too.
I tried reinstall etc. but nothing worked so far…
Thanks a lot for advicePS: Same problem with the portable version. Even if no liberay is loaded and after a completly fresh install and the program is started for the first time its extremly slow, and the popup help windows are poping up after 30 sec. When I click on open and the explorer is buidling up slowly it mostly crashes or freezes too.
I tried unsinstall even with deleting all regestry entries but the problem stays the same.PPS: After some further testing the problem beginns when sitting in the cockpit. Then the PTT button beginns to lag extremly and doesnt respond. After closing bms you can observe how the ppt button is pressed and depressed in foxvox without doing anything. All the inputs coming in then from the bms cockpit but a minute or so laging. Then foxvox crashes.
There is no difference between VR or normal. There is no difference if foxvoxparser.dll is activated or not. After quiting foxvox via task manager a new start of the program has the problems discussed above. Only after a restart of the computer foxvox reacts normal again but only before sitting in the cockpit.
No problems with the own DCS liberary for Jester in the F14 after restarting the PC. -
RE: FoxVox Free voice control software for BMS
@foxster Thanks a lot! Whats the condition for the “cleared off” order? VCC doesnt understand me when I order him to clear off, but there is a condition in place >=12. Dont know if I miss something.
So far I have to manually change from post start config to flight. -
RE: FoxVox Free voice control software for BMS
@foxster Thanks very much no everything works perfectly. There is no oppertunity to leave the display language at default insteed of switching to english to get rid of the error message, isnt it?
-
RE: FoxVox Free voice control software for BMS
@jacqueslees said in FoxVox Free voice control software for BMS:
@jojojung
I had the same problem. My system display language was french and when I set everything else to english the recognition engine doesn’t even start: Microphone setting, pronunciation training, Foxvox start listening key etc, until I have changed the system display language to english, only after this did the speech recognition works in english. It shouldn’t been this way but that’s what is hindering the recognition engine from starting on my side.And now even after I’ve trained it, the recognition is 40% off. It was still linked to my old french pronunciation profile and I don’t know whether it was relevant, I might delete it and start again from fresh.
My problem with the newest library is also that only VCC works from the start. Due to the recognition I’ve never been able to get « Hi Chief » or « cleared off » so none of the radio with ATC or wingman works. I’ve read about this from the posts above and I’ll give it more tests to report back.
Another thing is that when I was assigning toe break axis with my old Saitek combat pedals, I don’t know why but the foxvox starts to have lags. It became very long like everything froze for 6 seconds before you can do anything with Foxvox again. And it got worse from here. This happens when I’m detecting inputs and play with filters. My pedals got a constant 15% left toe break input in and that might be a thing to consider as well.
That was it! Thanks very much, now it works perfectly fine.
Only 2 little problems still left:- the big movements are not recognized by VCC or foxvox. Trimm movements are no problem.
- While brakes test, VCC repeats “movement” all the time once the breaks are kicked. He does not recognize the no movment when its released. No matter if left or right break. He repeats movements with no end anymore.
Any solution for this?
@foxster you did an awesome Job!!!
-
RE: FoxVox Free voice control software for BMS
@foxster said in FoxVox Free voice control software for BMS:
@jojojung What is your Windows system speech settings set to? This must match what you select for FoxVox:
Here’s a walkthrough link:
https://www.tenforums.com/tutorials/120631-change-speech-recognition-language-windows-10-a.htmlYes it is set to english too. But the problem with the error massage still exist.
-
RE: FoxVox Free voice control software for BMS
@foxster yes the message comes again…
when i go for german i can activate the voice recognition button and after that i can change that to english. i saved then to the file and close the program. But the message comes again when starting the program again. And the voice recognition button is crossed out again in the above menu.
No key recognition is not active. -
RE: FoxVox Free voice control software for BMS
I just watched your long tutorial about the crew chief commands but the test: rpm 65 and good start does not work for me not in bms not in test only.
-
RE: FoxVox Free voice control software for BMS
@foxster There i can choose from german or english (US).
when i choose german the error message disapear even when i reselect english right after that…