Yep. That file is there.
Although I could have suffered through learning BMS with the T.16000.M, I boxed it up and put a new Warthog HOTAS on my desk yesterday. Only problem I have now is my mild-OCD is being triggered by a burned out light on the throttle (FLOW R). Sent a message to Thrustmaster and hope I can just replace the light inside. There are so many buttons and now I need to learn how to use them all.
Latest posts made by Taint
-
RE: Yet Another T.16000M FCS HOTAS Review and Setup
-
RE: Yet Another T.16000M FCS HOTAS Review and Setup
Replying to myself again. I had to unplug the joystick/throttle then plug in again, compiled/ran script and it still didn’t work even though the throttle showed up second this time. Rebooting computer and running through it all again produces the same result. So very frustrating.
****** EDIT (again) ******
Had to go back into the Controllers>Advanced and select the throttle again. Problem solved againRunning script: C:\Users\Jody\Downloads\HOTAS\T.16000M FCS Hotas-Logic\TWCS Throttle-FalconBMS.tmc
Mapped plugin module “C:\Program Files (x86)\Thrustmaster\TARGET\Plugins\sys.dll”
Compile Succeeded.
Physical USB HID devices managed by script!
Currently plugged USB HID devices[2]:
1: “T.16000M” - “USB\VID_044F&PID_B10A&REV_0500”
2: “TWCS Throttle” - “USB\VID_044F&PID_B687&REV_0110”
Installing filter driver to VID_044F&PID_B687. Please Wait…Done!
USB HID device “TWCS Throttle”(USB\VID_044F&PID_B687\8&1BE45B7D&0&2) selected
Virtual HID devices managed by script!
Connecting virtual joystick…Done
Device name set to Thrustmaster Combined
Connecting virtual keyboard…Done
Connecting virtual mouse (absolute axes)…Donemain returned 0
-
RE: Yet Another T.16000M FCS HOTAS Review and Setup
Once again… my throttle isn’t working. The throttle control has moved back to the joystick slider. I’ve tried everything possible. Any chance that the T.16000.M being the second device is causing the throttle to move over? Here is the script output now…
Running script: C:\Users\Jody\Downloads\HOTAS\T.16000M FCS Hotas-Logic\TWCS Throttle-FalconBMS.tmc
Compile Succeeded.
Mapped plugin module “C:\Program Files (x86)\Thrustmaster\TARGET\Plugins\sys.dll”
Physical USB HID devices managed by script!
Currently plugged USB HID devices[2]:
1: “TWCS Throttle” - “USB\VID_044F&PID_B687&REV_0110”
2: “T.16000M” - “USB\VID_044F&PID_B10A&REV_0500”
USB HID device “TWCS Throttle”(USB\VID_044F&PID_B687\6&241970D9&0&4) selected
Virtual HID devices managed by script!
Connecting virtual joystick…Done
Device name set to Thrustmaster Combined
Connecting virtual keyboard…Done
Connecting virtual mouse (absolute axes)…Donemain returned 0
============================
-
BMS crashes when printing from COMMS window
Searched the forum a bit and couldn’t find this issue recorded anywhere. Is this a leftover function from the original Falcon 4.0 that BMS has yet to address?
-
RE: Yet Another T.16000M FCS HOTAS Review and Setup
Yep. That’s what I thought too. I knew the “cannot be found” message had to be pointing to the throttle. After stopping and running the script a couple times and checking the USB Game Controller panel which showed the virtual device correctly, I rebooted and it worked fine after that. I blame Windows 10 because I certainly didn’t do anything wrong.
Thanks again. This entire process made my journey to Falcon BMS relatively painless. Although, this solution for the T.160000.M is just temporary as my Warthog is shipping soon and should arrive in about 10 days (I’m in Okinawa so things take a while to get here).
-
RE: Yet Another T.16000M FCS HOTAS Review and Setup
I’m just getting started with BMS and I received my T16000M FCS HOTAS today. I found this post after a few minutes of searching the web. I followed the instructions to the letter as this was a new install of the drivers and TARGET software but I still can’t the throttle slider to be recognized by BMS. I can assign it to the virtual controller, but the control doesn’t work. I can assign the throttle control the T16000M slider and it works, so there appears to be something I’m doing wrong or a step I’m missing so that I can get the throttle working. When I run the TWCS Throttle-FalconBMS.tmc script in TARGET Script Editor I get this as the output…
Running script: C:\Users\Jody\Downloads\HOTAS\T.16000M FCS Hotas-Logic\TWCS Throttle-FalconBMS.tmc
*** Allocated ProcInstances found from the previous run: use FreeProcInstance() ***
Mapped plugin module “C:\Program Files (x86)\Thrustmaster\TARGET\Plugins\sys.dll”
Compile Succeeded.
Physical USB HID devices managed by script!
Currently plugged USB HID devices[1]:
1: “T.16000M” - “USB\VID_044F&PID_B10A&REV_0500”
USB HID device with hardware id “VID_044F&PID_B687” cannot be found
Virtual HID devices managed by script!
Connecting virtual joystick…Done
Device name set to Thrustmaster Combined
Connecting virtual keyboard…Done
Connecting virtual mouse (absolute axes)…DoneAny help would be appreciated. Thanks.
EDIT
That problem of the missing virtual controller went away after another reboot so I’d suggest adding another “reboot” after the script is compiled and ran and the virtual device shows up in the USB Game Controllers panel