Had the same problem too.
If you have mission commander, try copying the “LzssNative.dll” file from its folder and put it in the wdp folder and replace it.
This worked for me.
Had the same problem too.
If you have mission commander, try copying the “LzssNative.dll” file from its folder and put it in the wdp folder and replace it.
This worked for me.
I guess the 2nd line from the bottom has the issue:
POS 1 WayPoint= 0
Here it fails to parse ’ 0’ to an integer.
Try to remove the space:
POS 1 WayPoint=0After that it should be able to parse ‘0’ to an integer.
Thanks a lot. It’s working now.
So then could you provide your User/config/viper.ini file in order to have a look on it
Gesendet von meinem SM-G930F mit Tapatalk
[EWS]
Reqctr=1
Bingo=1
Fdbk=1
Flare Bingo=5
Chaff Bingo=5
PGM 0 Chaff BQ=3
PGM 0 Chaff BI=750
PGM 0 Chaff SQ=3
PGM 0 Chaff SI=2000
PGM 0 Flare BQ=1
PGM 0 Flare BI=0
PGM 0 Flare SQ=1
PGM 0 Flare SI=0
PGM 1 Chaff BQ=1
PGM 1 Chaff BI=750
PGM 1 Chaff SQ=3
PGM 1 Chaff SI=3000
PGM 1 Flare BQ=4
PGM 1 Flare BI=500
PGM 1 Flare SQ=2
PGM 1 Flare SI=1000
PGM 2 Chaff BQ=2
PGM 2 Chaff BI=750
PGM 2 Chaff SQ=4
PGM 2 Chaff SI=3000
PGM 2 Flare BQ=1
PGM 2 Flare BI=0
PGM 2 Flare SQ=1
PGM 2 Flare SI=0
PGM 3 Chaff BQ=2
PGM 3 Chaff BI=750
PGM 3 Chaff SQ=4
PGM 3 Chaff SI=3000
PGM 3 Flare BQ=2
PGM 3 Flare BI=750
PGM 3 Flare SQ=3
PGM 3 Flare SI=3000
PGM 4 Chaff BQ=1
PGM 4 Chaff BI=0
PGM 4 Chaff SQ=1
PGM 4 Chaff SI=0
PGM 4 Flare BQ=1
PGM 4 Flare BI=0
PGM 4 Flare SQ=1
PGM 4 Flare SI=0
PGM 5 Chaff BQ=1
PGM 5 Chaff BI=0
PGM 5 Chaff SQ=1
PGM 5 Chaff SI=0
PGM 5 Flare BQ=1
PGM 5 Flare BI=0
PGM 5 Flare SQ=1
PGM 5 Flare SI=0
[MFD]
Display0-0-0=4
Display0-0-1=6
Display0-0-2=11
Display0-0-csel=2
Display0-1-0=4
Display0-1-1=6
Display0-1-2=11
Display0-1-csel=2
Display0-2-0=5
Display0-2-1=4
Display0-2-2=11
Display0-2-csel=2
Display0-3-0=4
Display0-3-1=6
Display0-3-2=11
Display0-3-csel=2
Display0-4-0=4
Display0-4-1=6
Display0-4-2=11
Display0-4-csel=2
Display1-0-0=8
Display1-0-1=10
Display1-0-2=12
Display1-0-csel=2
Display1-1-0=8
Display1-1-1=10
Display1-1-2=12
Display1-1-csel=2
Display1-2-0=8
Display1-2-1=10
Display1-2-2=12
Display1-2-csel=1
Display1-3-0=8
Display1-3-1=10
Display1-3-2=12
Display1-3-csel=2
Display1-4-0=8
Display1-4-1=10
Display1-4-2=12
Display1-4-csel=2
Display2-0-0=0
Display2-0-1=0
Display2-0-2=0
Display2-0-csel=0
Display2-1-0=0
Display2-1-1=0
Display2-1-2=0
Display2-1-csel=0
Display2-2-0=0
Display2-2-1=0
Display2-2-2=0
Display2-2-csel=0
Display2-3-0=0
Display2-3-1=0
Display2-3-2=0
Display2-3-csel=0
Display2-4-0=0
Display2-4-1=0
Display2-4-2=0
Display2-4-csel=0
Display3-0-0=0
Display3-0-1=0
Display3-0-2=0
Display3-0-csel=0
Display3-1-0=0
Display3-1-1=0
Display3-1-2=0
Display3-1-csel=0
Display3-2-0=0
Display3-2-1=0
Display3-2-2=0
Display3-2-csel=0
Display3-3-0=0
Display3-3-1=0
Display3-3-2=0
Display3-3-csel=0
Display3-4-0=0
Display3-4-1=0
Display3-4-2=0
Display3-4-csel=0
[Bullseye]
BullseyeInfoOnMFD=1
[IFF]
Mode1 On=0
Mode2 On=0
Mode3A On=0
Mode4 On=0
ModeC On=0
ModeS On=0
Mode1 Code=00
Mode2 Code=0000
Mode3A Code=1200
Mode4 Key=1
AutoChange=0
TIME 0 Mode1 Code=00
TIME 0 Mode3A Code=1200
TIME 0 Mode4 Key=1
TIME 0 Criteria=-1
TIME 1 Mode1 Code=00
TIME 1 Mode3A Code=1200
TIME 1 Mode4 Key=1
TIME 1 Criteria=-1
TIME 2 Mode1 Code=00
TIME 2 Mode3A Code=1200
TIME 2 Mode4 Key=1
TIME 2 Criteria=-1
TIME 3 Mode1 Code=00
TIME 3 Mode3A Code=1200
TIME 3 Mode4 Key=1
TIME 3 Criteria=-1
TIME 4 Mode1 Code=00
TIME 4 Mode3A Code=1200
TIME 4 Mode4 Key=1
TIME 4 Criteria=-1
TIME 5 Mode1 Code=00
TIME 5 Mode3A Code=1200
TIME 5 Mode4 Key=1
TIME 5 Criteria=-1
TIME 6 Mode1 Code=00
TIME 6 Mode3A Code=1200
TIME 6 Mode4 Key=1
TIME 6 Criteria=-1
TIME 7 Mode1 Code=00
TIME 7 Mode3A Code=1200
TIME 7 Mode4 Key=1
TIME 7 Criteria=-1
TIME 8 Mode1 Code=00
TIME 8 Mode3A Code=1200
TIME 8 Mode4 Key=1
TIME 8 Criteria=-1
TIME 9 Mode1 Code=00
TIME 9 Mode3A Code=1200
TIME 9 Mode4 Key=1
TIME 9 Criteria=-1
TIME 10 Mode1 Code=00
TIME 10 Mode3A Code=1200
TIME 10 Mode4 Key=1
TIME 10 Criteria=-1
TIME 11 Mode1 Code=00
TIME 11 Mode3A Code=1200
TIME 11 Mode4 Key=1
TIME 11 Criteria=-1
POS 0 Mode1=0
POS 0 Mode2=0
POS 0 Mode3A=0
POS 0 Mode4=0
POS 0 ModeC=0
POS 0 ModeS=0
POS 0 WayPoint= 0
POS 0 Direction=0
POS 1 Mode1=0
POS 1 Mode2=0
POS 1 Mode3A=0
POS 1 Mode4=0
POS 1 ModeC=0
POS 1 ModeS=0
POS 1 WayPoint= 0
POS 1 Direction=0
I get this error when launching wdp in bms 4.35 update 2.
Have both visual c++ and .net framework installed
Also tried deleting my callsign.ini, still nothing works!
Any suggestions please?
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.InvalidCastException: Conversion from string “Loading Callsign.ini” to type ‘Integer’ is not valid. –-> System.FormatException: Input string was not in a correct format.
at Microsoft.VisualBasic.CompilerServices.Conversions.ParseDouble(String Value, NumberFormatInfo NumberFormat)
at Microsoft.VisualBasic.CompilerServices.Conversions.ToInteger(String Value)
— End of inner exception stack trace —
at Microsoft.VisualBasic.CompilerServices.Conversions.ToInteger(String Value)
at WeaponDeliveryPlanner.clsLoadDTC.GetCallsignRadio(String fName)
at WeaponDeliveryPlanner.clsLoadDTC.LoadCallsign(String fName, Boolean Version)
at WeaponDeliveryPlanner.cntDTC.GetCampFile()
at WeaponDeliveryPlanner.fclsMain.fclsMain_Load(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration></configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.