Ground crew would be cool
k3yb04rd
@k3yb04rd
I started Falcon 4.0 back in end of 90' and start of 2000. I was playing a bit on Genius F23. But didn't quite stayed in game to learn everything. Take off, Landing, LGB, Dogfiht was my ceiling. Now I'm back to fix that error in my gaming life.
Now I have T.A320 and TWCS, also using Opentrack.
I'll give my best to learn everything now, with your help ofcourse.
Best posts made by k3yb04rd
-
RE: FoxVox Free voice control software for BMS
@foxster thank you for your work!
-
RE: TWCS ministick 2 axis, x axis too sensitive
@Foxtrot701 dude u got on that, that’s what I was looking for!
-
RE: FoxVox Free voice control software for BMS
@foxster said in FoxVox Free voice control software for BMS:
- Do you experience any delays, hangups, or lag with FV itself while operating it?
Nope, FV works perfectly (more then perfectly). It’s a top software. I’ve even installed last version without prior libraries inside. (They are located in windows/documents/FoxVox library. But not loaded inside last version, only default library is in FV when started)
- Is the flickering immediate or does it seem to build up after a while?
flickering is instant in appearing as it is in dissapearing. If I start BMS without FV and try my zoom lever it works perfectly smooth, and if I then start FV zoom will flicker. But I may not emphasize it enough it only flicker from middle position and in full zoom, also a bit from middle toward full zoom out. In full zoom out it does not flicker at all. Middle position on a lever on A-10 Warthog throttle is default hard made detent (it’s small phisical detent where lever stops if you don’t pull it hard towar the full zoom.
Summary with FV started:- in full zoom out - don’t flicker
- in middle zoom - don’t flicker
- in full zoom in - flicker
- from middle to full zoom starts to flicker from zero toward more flicker
- between full zoom out and middle zoom (detent) a slight flicker
- Do any other analog switches cause the stuttering in BMS other than the zoom, such as moving the radar cursor?
No, radar cursor button works smooth with or without FV active
- If you minimize FV to the system tray when running it, does it still flicker in BMS?
Minimizing FV has no effect in this situation. I’ve tried starting FV first then BMS, and vice versa but with no luck. Result remains always the same
- Do you have the zoom mapped only in BMS (not anywhere in FV)?
No. Only in Alternative Laucher.
I would suggest if needed to connect to some voice channel and I can live stream it for you. If something is not clear or understandable for you in my writen words.
Thank you for trying to fix this for me. I love FV and it would be shame I have to switch to some other VR because of it. I’m keeping fingers crossed (in a good way)
Latest posts made by k3yb04rd
-
RE: FoxVox Free voice control software for BMS
@airtex2019 said in FoxVox Free voice control software for BMS:
@k3yb04rd this is a very weird bug … I’d love to understand what’s causing it.
Is there any movement visible for that axis in Alt Launcher? (while FV is running)
I just tested in AL, FOV in view tab. The same flickering appear and dissapear as you start or close FV.
-
RE: FoxVox Free voice control software for BMS
@foxster said in FoxVox Free voice control software for BMS:
- Do you experience any delays, hangups, or lag with FV itself while operating it?
Nope, FV works perfectly (more then perfectly). It’s a top software. I’ve even installed last version without prior libraries inside. (They are located in windows/documents/FoxVox library. But not loaded inside last version, only default library is in FV when started)
- Is the flickering immediate or does it seem to build up after a while?
flickering is instant in appearing as it is in dissapearing. If I start BMS without FV and try my zoom lever it works perfectly smooth, and if I then start FV zoom will flicker. But I may not emphasize it enough it only flicker from middle position and in full zoom, also a bit from middle toward full zoom out. In full zoom out it does not flicker at all. Middle position on a lever on A-10 Warthog throttle is default hard made detent (it’s small phisical detent where lever stops if you don’t pull it hard towar the full zoom.
Summary with FV started:- in full zoom out - don’t flicker
- in middle zoom - don’t flicker
- in full zoom in - flicker
- from middle to full zoom starts to flicker from zero toward more flicker
- between full zoom out and middle zoom (detent) a slight flicker
- Do any other analog switches cause the stuttering in BMS other than the zoom, such as moving the radar cursor?
No, radar cursor button works smooth with or without FV active
- If you minimize FV to the system tray when running it, does it still flicker in BMS?
Minimizing FV has no effect in this situation. I’ve tried starting FV first then BMS, and vice versa but with no luck. Result remains always the same
- Do you have the zoom mapped only in BMS (not anywhere in FV)?
No. Only in Alternative Laucher.
I would suggest if needed to connect to some voice channel and I can live stream it for you. If something is not clear or understandable for you in my writen words.
Thank you for trying to fix this for me. I love FV and it would be shame I have to switch to some other VR because of it. I’m keeping fingers crossed (in a good way) -
RE: FoxVox Free voice control software for BMS
@foxster Nope, it didn’t work for me. Same result, when FV is on, on zoom still flickers. When close FV it fixes itself and everything works fine.
Could it be something with AMD graphic drivers?
On old pc I was on Intel and Nvidia, on new one I’m on AMD totally. -
RE: FoxVox Free voice control software for BMS
@foxster thank you for your work!
-
RE: FoxVox Free voice control software for BMS
@airtex2019 I will try that when I get time to do the whole mapping thing.
But I want to know why would that be issue with FoxVox in the first place? I don’t have problem with Hotas Throttle zoom unles FV is started. Instantly I close FV the zoom fix itself, without exiting BMS 3D. -
RE: FoxVox Free voice control software for BMS
I have a strange problem with FoxVox and I just can’t understand its origin.
I bought new PC couple of months ago. It has AMD cpu and gpu.
I have tried old and new version of FoxVox and problem persist although on the old PC old version works perfectly.Problem:
When I have FV started, in 3D in Falcon BMS when I use FOV (zoom) I get flickering of FOV, and instanly when I close FV it’s all perfect. Same when I open FV again.-you can see here how it looks flickering:
(if doesn’t jump to wanted timestapm, its on 2:48)
Ryzen 7 7700X 8-Core Processor 4.50 GH
gpu AMD XR 7800 XT
64.0 GB
Thrustmaster Hotas Warthog A-10C stick
and A-10C throttle -
RE: That massive EXIT button...
@Batman nah dude, I’ve clicked many times. Also very stressful when you go to wdp before strarting mp mission and upon return you disconnect yourself a second before starting 3D.
I made similar post cause I didn’t know someone else done it before. In my post I give example on how to fix it if anyone care about it. Hope that’ll be fixed in next update.
-
BMS 2D map UI suggestion/request
Hi guys!
Is it possible that in some update you change widith of an EXIT button in 2d map? I have found that when I have opened some other window, like TrackIR or WDP or something similar and I want to click back to BMS 2d map I tend to click on the top of the window as many times in windows, only to discover that in seconds before entering 3D map in MP I actually clicked EXIT button. There really is no reason to be that wide as it is. I’m sending pic of suggestion for widith, so the portion of the window would stayed unclickable and did it’s purpose of turning back on 2d map without unintentionaly exiting BMS.
-
RE: Falcon BMS 4.36.3 Documentation: Bug Reports
Document: TO BMS 1F-16CM-34-1-1
Page: 175
Original sentence: “To unslave the HUD TD box from the FPM, TMS UP is held for more than 50s.”
Corrected sentence: “To unslave the HUD TD box from the FPM, TMS UP is held for more than 0.5s.”
(correction was commented in FL weapons_help)