DonLduk's Profile (4.33)
-
Windows 10 here and I had the profile running great last night but I’m unable to duplicate it today. It seems no matter what I do now with the Script running it shows as Combined ID-1 when it seems to be setup properly with joystick at ID-0 and throttle as ID-1 without the script running…I have tried everything Don, it’s a great profile I just wish I could get it working again.
Without Script running
With Script running/Saitek pedals stay as 2
I’ve put so much time into just trying to get this sim running properly and I don’t want to give up on it. Maybe I might have to give up on trying to use the TMWH and go back to using my trusty old Microsoft Sidewinder Force Feedback 2, the Warthog joystick is way to stiff for my old broken wrist anyway. Wish me luck! I’ve tried all the other sims, they don’t have the Dynamic missions and campaigns like BMS nor do they have nearly as good a flight model, DCS is nice but it’s like arcade compared to this. Is it possible to use your script for just the throttle?
Cheers and Salute!
KV -
hi,
thank you for trying out my profile. I appreciate it.When the script runs, it disconnects “virtually” the joysticks and throttle, and then reconnects them (hence you hear the USB unplug sound a couple of times). Maybe during this process, the pedals take the ID.
tip#1: My suggestion would be to run the script WITHOUT the pedals, and when all set, plug the pedals.
quick tip#2:
try buying a powered USB Hub (d-link etc) and plug the devices in order to the hub, and plug the hub to the usb id 0 port. that way you can guarantee they will connect in the same order. I use on of these along with Trackir, wireless mouse etc and never have problems day after day.tip3#: don’t quit on the warthog, once you figure out and repeat the process, it becomes a great experience to fly.
Windows 10 here and I had the profile running great last night but I’m unable to duplicate it today. It seems no matter what I do now with the Script running it shows as Combined ID-1 when it seems to be setup properly with joystick at ID-0 and throttle as ID-1 without the script running…I have tried everything Don, it’s a great profile I just wish I could get it working again.
Without Script running
With Script running/Saitek pedals stay as 2
I’ve put so much time into just trying to get this sim running properly and I don’t want to give up on it. Maybe I might have to give up on trying to use the TMWH and go back to using my trusty old Microsoft Sidewinder Force Feedback 2, the Warthog joystick is way to stiff for my old broken wrist anyway. Wish me luck! I’ve tried all the other sims, they don’t have the Dynamic missions and campaigns like BMS nor do they have nearly as good a flight model, DCS is nice but it’s like arcade compared to this. Is it possible to use your script for just the throttle?
Cheers and Salute!
KV -
Thanks for the reply, the USB hub sounds like the it might be the way to go. I’ll let you know soon…again thank you.
-
As I have rudder pedals, I don’t need the Shifted DMS to act as rudders. What I would like to do is change those two positions to Increase and Decrease Waypoints, But still be in a shifted state. How would I do this without messing up this great profile? I’ve looked in the script and cannot find it anywhere.
I sent you a pm asking the same question. But I thought it might be better ask here incase anyone else wanted to do something similar.
-
As I have rudder pedals, I don’t need the Shifted DMS to act as rudders. What I would like to do is change those two positions to Increase and Decrease Waypoints, But still be in a shifted state. How would I do this without messing up this great profile? I’ve looked in the script and cannot find it anywhere.
I sent you a pm asking the same question. But I thought it might be better ask here incase anyone else wanted to do something similar.
There are 2 different methods depending on the game you are using. you asked me for DCS and there you have to necessary use TARGET, in the PM i sent you the code so you edit the commands.
In BMS, I mapped it in the keyfile, not target, to edit the keyfile do the following:
Open DonLduk TMWH 433.key with notepad
press ctrl-f (to find)
search for “rudder” until you find this block of textDMS/H3
SimRadarAAModeStep 266 -1 -2 0 0X0 0 “”
AFRudderRight 267 -1 -2 0 0X0 0 “”
SimDoNothing 268 -1 -2 0 0X0 0 “”
AFRudderLeft 269 -1 -2 0 0X0 0 “”changethe AFRudderRight and AFRudderLeft text to
SimNextWaypoint
SimPrevWaypointdon’t mess up the spaces, make sure you replace the text only.
save, load the keyfile in BMS, and you should be set.
cheers!
-
This was for BMS. I’m not messing with a profile for DCS just yet. Thank you so much for your response. I’ll implement it right away.
-
let me know if this worked for you. thanks
-
I have verified Stick on ID 0 Throttle on ID1, when I run script it makes my throttle disconnect and dissapear from PC (no lights, no identification in device manager). and now I cant use it at all unless I swap ports and have it auto detect again, even after restart.
Now they are both gone, after I tried a second time.Unplugged restarted, and re-plugged in, still dead, I’m sure if I move USB they will work again, but I want my old ports back and that problem solved before I move on.
Edit: Fixed them back to square one by identifying correct “USB interface device” in device manager and uninstalling.
any ideas?
Final Edit: 100% issue on my end, so I will keep trying to find a fix.
Edit Ender: FIxed by reinstalling Target
-
Just got a Thustmaster warthog and am using your profile - thanks its awesome. I would like to swap out the WeaponCameria view for Padlock - question is what values do I need to replace in your script? Thanks in advance!
-
Hi,
what means “SUp, SDown , S:” on the warthog profile ???
Rgds.
-
SUp etc you use the paddle switch to use those options
-
Hi,
what means “SUp, SDown , S:” on the warthog profile ???
Rgds.
hello. it means Shifted. so you press the paddle to enable shift, then press the button
-
Just got a Thustmaster warthog and am using your profile - thanks its awesome. I would like to swap out the WeaponCameria view for Padlock - question is what values do I need to replace in your script? Thanks in advance!
Open DonLduk TMWH 433.key with notepad
press ctrl-f (to find)
search for “OTWSelectWeaponMode” until you find this block of textCoolie Switch
OTWSelect3DCockpitMode 277 -1 -2 0 0X0 0 “”
SimHSDRangeStepUp 278 -1 -2 0 0X0 0 “”
OTWSelectWeaponMode 279 -1 -2 0 0X0 0 “”
SimHSDRangeStepDown 280 -1 -2 0 0X0 0 “”change the OTWSelectWeaponMode text to either of these option (depending on what you want)
OTWStepNextPadlock
OTWStepPrevPadlock
OTWStepNextPadlockAA
OTWStepPrevPadlockAA
OTWStepNextPadlockAG
OTWStepPrevPadlockAG
OTWSelectF3PadlockMode
OTWSelectF3PadlockModeAA
OTWSelectF3PadlockModeAGdon’t mess up the spaces, make sure you replace the text only.
save, load the keyfile in BMS, and you should be set.
-
Thx!
-
If you read the .txt with care you will see the structure for the DirectX assigned callbacks. By modifying these you can adapt the profile to your liking. cheers
-
Thanks for the great profile. Works like a champ.
After I run the script in TARGET (any script for that matter) my controller appears as “Thrustmaster Virtual Game Controller (root)” in the BMS menu, DCS, DXDiag, WIN device manager etc…
I sent a lengthy email to TM support they responded with a “don’t worry about it” explanation. I am running Windows 10 and did not have this problem in WIN 7. The controller and script work fine regardless.
Cheers!
-
Thanks for the great profile. Works like a champ.
After I run the script in TARGET (any script for that matter) my controller appears as “Thrustmaster Virtual Game Controller (root)” in the BMS menu, DCS, DXDiag, WIN device manager etc…
I sent a lengthy email to TM support they responded with a “don’t worry about it” explanation. I am running Windows 10 and did not have this problem in WIN 7. The controller and script work fine regardless.
Cheers!
thanks for letting me know. cheers!
-
sure no problem
-
Im using this profile but I cant seem to lock up a target. Can you please tell me by default which key it is and if it is mapped in you profile I cant seem to find it. Thanks
-
I figured out the Target lock problem but just an FYI your key for the speed brakes is not functional…How can I get it to work. Thanks