4K Resolution possible?
-
30hz, no 30 fps
beside when i buy a ferrari, i am still limited to 50 km/h in the city mateand there is a slight difference between your post 36 and your post 31.
post #31 says no go, hence the need for a correction.
post #36 says it’s stupid to do which is for anyone to decide if it’s worth or not -
So with 30hz what’s your fps?
The fps falcon says or the fps actually drawn?The difference between posts is to make it more sweet for u.
U say I retracted? And so?
U pay x.xxx amount of money but u actually enjoy a large screen. Sure if u say so is fluent, ok but it’s a bottleneck.
Why not go for 3xhd or 1920x1200 monitors which are above 60hz and take full advantage?
Sure the bezel is one reason or the one and only. Unless there is the w=>cable problem equation. -
Well Mr Turner cant seem to get it together, all I can think of is He is using the HDMI out on His GTX 580s
Or the GTX 580 will not do above 2560x1440,
Looking back he seems to be running 970s now.
Pic from Nvidia’s site on the GTX580
As for the 970’s, some have HDMI2.0 some don’t
I use the phillips 40" from DP and have no issue at 60hz. -
Sorry, let me clarify for everyone, I am using my new machine, (have not updated my sig) which as Shadow says, has 970’s in SLi. I also run P3dv3, DCS, and several car racing sims and they all work absolutely fine at the native resolution 3840 x 2160.
The highets res on offer in the GUI is 1920 x 1080, so it must be something to do with how Falcon reads what windows is telling it about my monitor. Windows is obviously telling all the other programs / sims the correct info….
I can also confirm I am NOT using either the HDMI ports or the HDMI cable, it’s a display port cable in the correct outlet.
Arty, I can run the other sims I describe at very high frame rates ( as you might imagine) with no problem, the monitor and PC / graphics card set up is very good for all my other sims…looks awesome…
which is why I am somewhat miffed at not being able to run Falcon…
-
sorry to hijack the thread but it seems related, i just picked up a 4K monitor on sale, Samsung 28"
Its currently connected using HDMI (waiting for DP Cable to ship).
Graphics card is AMD R9 280XThe display is running everything at the native 3840x2160 (30Hz due to HDMI)
Initially i couldnt select any resolution in BMS over 1920x1080, but the refresh rate config change (set g_bAllowAllRefreshRates 1) fixed that.Now what im running into is that im running in windows mode, when i select 3840x2160 in the graphics options is is way to large and spreads way out across my primary and secondary display.
I stepped through each size until it filled the screen and for some reason, 2560x1440 gives me a full size window, but i confirmed windows still shows teh display set to 3840x2160Any idea why the 2560x1440 option is filling out my 3840x2160 display?
-
nevermind, i figured it out, i switched back to full screen mode, then when i went back to windows mode it started working properly… no idea why, but it did
-
It was the dogs fault……
-
It was the dogs fault……
yea must have been…
now i have to figure out why my comms menu (Tower, AWACS, etc) are in the middle of my screen not on the side and why the bottom options are cut off, like the text is too big for the box and the bottom options dont fit… strange -
yea must have been…
now i have to figure out why my comms menu (Tower, AWACS, etc) are in the middle of my screen not on the side and why the bottom options are cut off, like the text is too big for the box and the bottom options dont fit… strangeDid you find any fix for that issue? I am having this issue too.
-
Sorry never did sort out the window issue, but i have also downscaled from 4K my R9 280X was having a hard time keeping up frames @ 4K with DCS so i dropped it… so i never really worked on it much in BMS