AMD HD 6950 does not work
-
Thanks my friends, always welcome the replies…
@ Lazystone: Yes I checked, and it works with the old Nvidea gpu. The dvi-vga adapter works fine, I tested on nvidea gpu and it is ok…
@Arty: Yes, and no… lol I will explain. The nvidea gpu works fine, but it is old and I have low FPS running F433, I need a better gpu, and I was given one as donation… nice, but I cant make it to work, well you understood that… The nvidea drivers are installed because the nvidea card works, so I will not unistall it, because win7 will install a generic driver for it as long as i have it on the pc… When I test the amd gpu, I remove the nvidea, and installl amd on the pcie slot, but the drivers are still nvidea. in case it works, the win7 will install generic drivers to it, and I will make the correct driver installation. But itt is not working so far.
Actually, at 10min ago I tested it, and I noticed win7 has started, but no video, as i said, I knew it because of win sounds… I am still searching for a solution. Thank you very much for the comments.
@ neystratiou: I did not go through this yet, as I saw the gpu worked yesteday for few moments, so I believe it is not damaged, there must be something else I did not find out yet…
To flash back the gpu bios will be the last attempt, after I take it to an experienced hardware technician.
So far, I have no way to use gpu-z, which I have as well as cpuid. It gets warm, but I believe it is whitin the normal temp, I can touch it ok after turn off pc, to remove it from the MOBO.
I have read something about screen resolution and digital analog devices, so I am trying to know more about that, have set resolution to the lowest possible 800x600, and will try again.
I ahve only flipped the flash switch, not flashed the biosas it is described below:
(In case your card does not boot at all you can use AMD’s new backup BIOS feature:Set the BIOS switch in the 2 position to enable the recovery BIOS and restart the computer. This will let you boot the card without problems.)
I did it, and it worked, but now, it is not working…
I remember exactly what I did when it stopped working in the first time, and it was due to install the amd graphics driver, after reboot, it did not work… but I have done many new attempts, and the last time, after being formated the HD and installed the drivers, it stopped working again… Strange and unknown problem…
I will keep the thread posted.
Thank you all for the help.
Regards Metalhead -
O.k. your DVI to VGA adapter is working, good. Out of the “game”.
Now since you have formatted the HDD, DO NOT install the Nvidia drivers yet.
Try to boot into the safe mode, AFTER some minutes (around 10) of the time that you have your graphics card to hang your pc. Maybe you have an overheating of the card.
Also did you check the led of the “PCIEX16_1” slot?
The brand and model of your CRT monitor?
Post any tests that you made with the results, in order to we have a better idea of the status.
Nikos. -
Well Nvidea drivers already installed. it is around 58 to 60 degrees c.
the led on the pcie was red, and now it is ok. I will explain and you all will not believe the problem… I do not really believe, but I hope this is really, and I will fix it somehow.
weight… yes the weight of the gpu is driving it downwards and it does not fit well in the pcie slot.
how I found out?
I tried to turn pc on with it installed, but red lights on the pcie led. I switch it of removed the cables and then in an close view of the MOBO, I saw it moving just a little bit. i didn’t believe, but I hold it back in the corect position, flipped the flash back switch to the number 2 position plugged all cables , and turned on, and it is working so far.I will upload the pics of the gpuz without drivers installed.
Well if this is really the problem, I will now proceed with installation praying it does not stop working anymore… cant wait to try it on F433…ah monitor is Samsung Syncmaster 753v… please do not laugh, it is only i can have for now… that os prehistoric…
Regards Metalheadsorry for the size of the pic I do not have anything but paint installed here and i do not know how to edit it using paint
-
No one is laughing m8 I understand and share what u r going through. Good luck and hope everything will go ok.
-
Nice, just be on it.
Did you screw well the screw at the top of the card on the case? Take a look…
For your monitor of 17", from its manual (check here: http://www.manualslib.com/manual/145476/Samsung-Syncmaster-750s-753s-753v-753ms-750ms.html?page=47#manual) you can have max. resolution of 1280x1024 at 65 Hz.
Be sure after the graphics driver to install monitor driver.
Also don’t mess the drivers. When you want to be installed the Nvidia card, leave ONLY the Nvidia driver. If you want to have the AMD card, leave ONLY the AMD driver!
It isn’t only the idea you want to think. Specific hardware need its specific driver to work flawlessly, and without any other traces of similar driver for the same bus…
I wish you a happy end.
Nikos. -
Thank you all, it is working… i formated again and will do all the pain job from scratch. Sadly i found some artifacts while installing win7 but thanks God it happened at the end of instalation. I will post soon some pics after i install the drivers. Now posting using smartphone sorry if i typed wrong and it also difficult to see read type
-
For any reason the driver i installed for the gpu is also buggy it is now black screen after reboot and with artifacts onthe startup
oh god -
For any reason the driver i installed for the gpu is also buggy it is now black screen after reboot and with artifacts onthe startup
oh godWith which one AMD driver? The brand of the HD 6950 is?
And be sure that at driver installation (at every version - IF has it) DO NOT by any means choose the “AMD Gaming Evolved”! It will give you only troubles, you don’t need it.
Nikos. -
I’m afraid the vga is saying bye bye. Sorry…
-
Power color HD 6950. I do not have further details other than visual and those on the gpuz, because it came out of the box. It is working and running nice.
I am almost sure the problem is the weight of the hardware, so I put a solution which will make many people happy and laughing…. its ok, because I laughed a lot… pictures soon… Now I am installing the drivers, and will install in the first place, first software, f433 and then free track and everything related to falcon… Now, I can’t wait felling is so huge…
The artifacts was due to the gpu was being pulled downward, but it has a temporary fix. I have to think in a solution other than the one I did here… pics soon…
I will not say “problem solved” yet, because I believe it requires some days of test before I trust saying that…
Regards Metalhead. -
The problem is not the weight as we all have (or most of us) GPUs of similar construction.
Their must be some thing you can do with the cabling, make shore its not pulling down on the PCB or the way its fixed into the box.
Many years ago I had built a PC for a client who were constantly having problems with it blue screening or just locking up. On my work bench I could not replicate the problem.
Cut to the end of the story, it was a “sloppy/loose” DIM sockets for the memory and when people walked around the PC that was sitting on the floor it some times jarred the memory sticks which was causing the problem, , I had to replace the Mobo.
Metal please use a older driver like: Catalyst Version 14.12 AMD Catalyst Omega Software
If needed ill put it on our TS3 for you.
-
Thank you Sir, it must be then a loose sockets on the pcie slot… well, as the mobo is in a vertical position, the gpu tends to go downwards… I have put a cordon/string tying up the gpu to the chassis of the case… it is working so far, and I did not have any problems since then…
I installed the “12-8_vista_win7_win8_64_dd_ccc.exe” file, it was sent by Chuckes
I will let you know in case this one does not work well…
Regards Metalhead -
Thank you Sir, it must be then a loose sockets on the pcie slot… well, as the mobo is in a vertical position, the gpu tends to go downwards… I have put a cordon/string tying up the gpu to the chassis of the case… it is working so far, and I did not have any problems since then…
I installed the “12-8_vista_win7_win8_64_dd_ccc.exe” file, it was sent by Chuckes
I will let you know in case this one does not work well…
Regards MetalheadMetalhead in addition to software uninstall also be sure to use a utility like ‘Driver Cleaner’ before trying to install or reinstall new drivers especially if installing a new GPU and definitely if swapping AMD for Nvidia or vice versa.
Running Driver Cleaner ensures removal of all Nvidia or AMD drivers and forces GPU to start in ‘native’ VGA mode then you can install the drivers of your choice. This can avoid reformatting and reinstall of Windows. Make sure to check AMD website again and download recommended drivers. Crimson seems pretty stable now and i am running a 5750 and R9 380 in same machine on Crimson. I too had problems after using ‘Gaming Evolved’ so i did a Driver Cleaner uninstall and reinstalled without. Incorrect drivers can cause all kinds of weird little problems. -
Thankyou Jetlag, I will look for it.
Today it is running smoth, and I am doing all that painful instalation of updates and softwares, but till now, it is all ok.
In some minutes I will install falcon if everything is ok
Regards Metalhead