Mud's Profile
-
Hi Mud.
Thanx for the profile. I was wondering if maybe you have any future plans to add LEDs for Autopilot and LEDs for AfterBurner? -
Hi Mud.
Thanx for the profile. I was wondering if maybe you have any future plans to add LEDs for Autopilot and LEDs for AfterBurner?I currently have no plans to add the leds for the AB since you can hear and see (fluel flow) it clearly. The autopilot is already linked to the backlight of the throttle base.
But never say never; perhaps I will in the future. -
Hey mud Thanks for the profile it’s great. I finally bought a Warthog after messing around with the x55 for 6 months. Endless error’s with it, the Warthog is assumed. and after returning one I got a good one Thanks again. I wondering if you have a large picture for the joystick and throttle functions, I like to laminate them and have them close by.
Thanks again, Titanium55
-
Hey Titanium,
This is the original Powerpoint file I created the layout with. I reckon you should be able to print that large enough to hang up.
Download hereBest regards,
Mud
-
Hi Mud,
I don’t know what was thinking I had it the whole time, I just didn’t open it, Sorry for taking up your time on something stupid. Anyways Great profile Thanks again for taking the time to respond.Best regards and watch you six,
Titanium -
Thanks for the hard work mud.
Anyone can answer this but how do we slew the TGP and Radar around? The slew control doesn’t function as in DCS A10 and I’m having a neck of a time figuring out out with the keybindings as well.
Many thanks
-
If I’m understanding you correctly it’s on the keyboard layout- (Insert key Enable), (Page up-Cursor Zero) and then the arrow keys (Shifted Up, Down, Right, Left) or maybe the Insert Key will enable your Slew Button. That’s what I see haven’t used it yet, but it is on the Keyboard Layout.
Titanium
-
If I’m understanding you correctly it’s on the keyboard layout- (Insert key Enable), (Page up-Cursor Zero) and then the arrow keys (Shifted Up, Down, Right, Left) or maybe the Insert Key will enable your Slew Button. That’s what I see haven’t used it yet, but it is on the Keyboard Layout.
Titanium
My apologies to the confusion, sleep deprivation is no one’s friend. I’m a DCS convert and am going through the falcon training missions.
On the warthog throttle, there is the micro mouse used to slew in the A10. Is it not functioning in Mud’s profile? I see that he has a short and long press of the micro mouse button (cursor enable and zero) but not the slew function itself.
After some searching I found that I needed to hold shift and the arrow keys to actually slew the various sensors around. Hopefully there is a way to map that on the micro mouse but it is (obviously) beyond the scope of my ability.
What is the function of the cursor enable and zero?
-
Disregard, I searched ‘cursor’ instead of ‘slew’ under this thread and mud answered. You need to assign it under avionics settings.
Great job mud
-
Is there a way to get frame rate using this profile plz? Cntl Z:R doesn’t work of course. Thank you!
-
It’s not really related to my script actually, and search can be your friend.
Try ALT + C, then F
https://www.benchmarksims.org/forum/showthread.php?24690-FPS-Rate&highlight=FPS
-
Hello Mud
Will it be updated to the new version BMS 4.33 U1 ? -
Hey ca5tor,
As far as I can see no changes should be done to the script for it to work with 4.33U1. I will have to modify the key file though to add the 4 new callbacks for the F-18.
I’m currently still running 4.33 myself, but as soon as I’ve updated I will sort out the key file.Br,
Mud
-
Hey Mud,
I’ve a problem with the profile. All buttons on my stick are not used except the trim switch. I’ve Falcon BMS 4.33 U1, Windows 10 Pro 64bits.
Any ideas? -
Same issue here as pticuny’s & Win10 Pro 64bit.
Thx for your trouble with a revised vers. as your profile is much appreciated!!! -
I think your device ID’s are probably wrong so the DX buttons are off.
Check out: https://www.benchmarksims.org/forum/showthread.php?26581-Falcon-BMS-4-33-U1-Script-don-t-work-correct-in-this-update -
I try with a basic profile provide by BMS, and all DX buttons work fine. But when I load your profile, all DX buttons are not used.
I saw the thread https://www.benchmarksims.org/forum/showthread.php?26581-Falcon-BMS-4-33-U1-Script-don-t-work-correct-in-this-update , and I remove “devicesorting.txt”, I changed lines to a correct order, but nothing happens.Edit: The key file is strange.
-
I just installed 4.33 U1 myself now to be able to check / test.
I had the same problem as you out of the box, so I had a look at the DeviceSorting.txt file and my rudder pedals were listed first there.
So I changed it to{FFFF044F-0000-0000-0000-504944564944} "Thrustmaster Virtual Game Controller (root)" {076406A3-0000-0000-0000-504944564944} "Saitek Pro Flight Combat Rudder Pedals"
And everything is working as it should.
Like I mentioned a few posts back, I’m pretty sure the only thing that needs changing in the script is the addition of a few callbacks to the key file for the F-18.
I’m fairly certain your problem is your device ID / order.
-
@Mud:
I think your device ID’s are probably wrong so the DX buttons are off.
Check out: https://www.benchmarksims.org/forum/showthread.php?26581-Falcon-BMS-4-33-U1-Script-don-t-work-correct-in-this-updateChanged the order in DeviceSorting.txt file. Will see if that did the trick. Thx!!!
Yeah, all is good now. Re-ordering the devices in DeviceSorting.txt file fixed the issue.
Thanks again Mud!
-
This is my DeviceSorting.txt file.
{FFFF044F-0000-0000-0000-504944564944} "Thrustmaster Virtual Game Controller (root)" {076306A3-0000-0000-0000-504944564944} "Saitek Pro Flight Rudder Pedals"
I copy and paste the key file in the Config folder of BMS.
I run the script through T.A.R.G.E.T.
I run BMS and I load the key file.I just remove the parts with the MFDs.
Same issue…