Mud's Profile
-
Thank you! I was sure it was something wrong with my setup. Didn’t come across that post somehow.
Thanks again!
Knub
-
Glad you got it sorted!
-
Hi Mud
Are there DX assignments for the AA or AG DataLink commands for the throttle quadrant or just the key bindings (delete and PgDn)?I would like to add these commands rather than Comm1 and Comm2 transmit as I don’t fly online.
Thanks for any help
-
The datalink are some of the few buttons I actually use the keyboard for (apart from the ICP).
Of course, you can always change the comms switches to the datalink as you desire in the BMS Setup, modifying the key file.
-
Thanks Mud, that is what I thought. Thanks for the fast response too.
-
Sorry, but I have this problem, when run the script give me an error:
Running script: C:\Program File (x86)\Thrustmaster\TARGET\scripts\BMS 4.33 - Mud.tmc
***Allocated ProcInstances found from the previous run: use FreeProcInstance() ***
Mapped plugin module “C:\program Files (x86)\Thrustmaster\Target\Plugin\sys.dll”
Compile Succeded.
Physical USB HID devices managed by script!
Currently plugged USB HID devices[4]:
1: “F16 MFD 1” - “USB\VID_044F&PID_B351&REV_0100”
2: “F16 MFD 2” - “USB\VID_044F&PID_B352&REV_0100”
3: “Throttle - HOTAS Warthog” - "USB\VID_044F&PID_0404&REV_0100
4: “Joystick - HOTAS Warthog” - "USB\VID_044F&PID_0402&REV_0100
USB HID device “Throttle - HOTAS Warthog” (USB\VID_044F&PID_0404\6&35E955B4&0&3) selected
USB HID device “Joystick - HOTAS Warthog” (USB\VID_044F&PID_0402\7&14DF9175&0&1) selected
USB HID device “F16 MFD 1” (USB\VID_044F&PID_B351\6&35E955B4&0&4) selected
USB HID device “F16 MFD 2” (USB\VID_044F&PID_B352\6&302C75BB&0&3) selected
USB HID device with hardware id “VID_044F&PID_0400” cannot be found
USB HID device with hardware id “VID_044F&PID_B10A” cannot be found
Virtual HID devices managed by script!
Connecting virtual joystick…Done
Device name set to Thrustmaster Combined
Connecting virtual keyboard…Done
Connecting virtual mouse…Donemain returned 0
Error: one of the selected USB devices (2) has been unplugged. Aborting script!
Aborting script (check output above for reason)…
Script stopped!There are not unplugged USB, everything is installed properly and work fine.
Please, can yo give me where i did a mistake?Thanks a lot.
Lion -
Most likely because of this, Lion:
https://www.benchmarksims.org/forum/showthread.php?8844-Mud-s-Profile&p=348847&viewfull=1#post348847
-
Thank you so much Mud, now there is not error.
When I go in the setup 4.33.u1 and I selected Mud profile, all the buttons in my joystick (Warthog) does not work; it is normal? (Also when I fly)
Thanks a lot.
Lion
-
Hey Lion,
It’s most likely this: https://www.benchmarksims.org/forum/showthread.php?8844-Mud-s-Profile&p=375432&viewfull=1#post375432
Been covered here and in other threads quite a few times already, but I understand it’s not always that easy to go through dozens of pages to find the solution to the problem you may be having. Anyway, I hope it’ll sort yours out.
Best regards,
Mud
-
Hi Mud,
I checked:
{076406A3-0000-0000-0000-504944564944} “Saitek Pro Flight Combat Rudder Pedals”
{B351044F-0000-0000-0000-504944564944} “F16 MFD 1”
{B352044F-0000-0000-0000-504944564944} “F16 MFD 2”
{C2AB046D-0000-0000-0000-504944564944} “Logitech G13 Joystick”
{FFFF044F-0000-0000-0000-504944564944} “Thrustmaster Combined”They are right. Any solution?
Thanks for your time.
Regards
Lion -
Thrustmaster combined should be first in the list.
-
Thanks, I will try it
-
Hi Mud,
Thanks for the profile - I have been using it extensively in 4.33, however after updating to 4.33 U1, as per some other comments, it seems to have ceased working.
I have tried:
-Altering Devicesorting.txt with every possible combination
-Reinstalling BMS
-Reinstalling my TM drivers + TARGET
-Everything mentioned here (https://www.benchmarksims.org/forum/showthread.php?8147-Morphine-s-Profile&p=341640&viewfull=1#post341640) – post #445The chances are, I’ve missed something obvious, but I can’t for the life of me figure out what that something is.
Any help would be greatly appreciated.
-Adam
-
Hey Colai,
Can you say what exactly is the problem? Script fails to run? Buttons not working in BMS? Other?
Br,
Mud
-
Hi Mud,
The script runs perfectly fine through the target software, but in BMS the DX binds don’t register, however, the buttons that are bound to key-presses (left and right MFDs for example) seem to.
-Adam
-
Could you post the contents of your devicesorting.txt here please?
-
Hi Mud,
Managed to get it working, I’m not sure if it was a conflict, or a corrupt install, but after removing the drivers for my 360 pad, all is working.
Thanks again,
-Adam -
Hi Mud, the buttons for the radio were not included? Another question … of the Warthog LEDs go out, I read that depends from the autopilot, but how do I turn them on?
-
Hey Aspide,
- The radio buttons are mapped to the throttle mic switch.
- The backlight comes on when you activate the autopilot, else they stay off.
Mud
-
@Mud:
Hey Aspide,
- The radio buttons are mapped to the throttle mic switch.
- The backlight comes on when you activate the autopilot, else they stay off.
Mud
Thanks Mud!