Morphine's Profile
-
You don’t need to use the editor or gui to launch the script, you can create a shortcut that does it for you.
If you follow the standard target install:
Create a shortcut.
Target field = “C:\Program Files (x86)\Thrustmaster\TARGET\x64\TARGETGUI.exe” -r “C:\Program Files (x86)\Thrustmaster\TARGET\scripts*Warthog_BMS_Full_Paddle_swap.tmc*” (The name of your script)
Start in = “C:\Program Files (x86)\Thrustmaster\TARGET\x64”I’ve never had an issue running them this way.
-
I’ll give it a try. Thanks.
-
Hello. So I’m suddenly getting a drift to the left and up of the cursor set to the XY rotation. I never used to have that and I don’t have that problem if the script isn’t running. I tried increasing The Dead Zone in game and it didn’t help any suggestions?
Edit: Well it’s more than that. Similar to what some folks are posting above. When I run the script (the drop box version) my throttles won’t even work now. Go from full off to full on like a switch. Never had this problem before. Last time I ran the script was probably April or May… Any thoughts on what would have updated between now and then to break this?
-
Maybe the script is choking. Does the script fail when looking at the device analyzer?
-
Any thoughts on what would have updated between now and then to break this?
Windows. MS messed with something in the enumartion process that has rendered target unreliable. Problems with axis and double button presses is most likely related to target not hiding the physical devices from the system.
You can check if this happening by running the script, then going to Windows start menu and running joy.cpl. If both the physical devices and the virtual device are there, then you’re going to have problems. The only reliable way I can run the script correctly is to restart windows then run the target script editor, hit compile and then it run. If I run any other program before I run target the script will often hang, but still run, though it won’t hide the devices. Which results in a faulty profile.
I wish I could provide a more reliable method for running the script but there is something going on with target, that needs to be fixed tby thrustmaster. -
Hi, after a long pause I would like to resume activity with BMS, at that time I used Morphine’s profile … there are important updates or updates?
-
Hi, after a long pause I would like to resume activity with BMS, at that time I used Morphine’s profile … there are important updates or updates?
The old profile no longer works. You need to use the latest version available here. https://www.dropbox.com/sh/66rd8borl2zrfbd/AAAnvz5u93ebm0Tzh322Vw6ba?dl=0
You have to use the key file in the Dropbox too. Run the target script, launch the game, load the keyfile then quit. After that open devicesorting.txt in your BMS install, under users/config. Copy and paste the file so that thrustmaster combine is at the top of the list. Then restart the game and bind the axis.
If you are having troubles with buttons not matching the configure or axis not responding, this is most likely due to an issue with target. I described the problem above in the post.
-
The old profile no longer works. You need to use the latest version available here. https://www.dropbox.com/sh/66rd8borl2zrfbd/AAAnvz5u93ebm0Tzh322Vw6ba?dl=0
…Copy and paste the file so that thrustmaster combine is at the top of the list. Then restart the game and bind the axis.
I thank you for your help, I did not understand which file I should copy to put it on top of the list …
-
I thank you for your help, I did not understand which file I should copy to put it on top of the list …
You need to alter the contents of the file named devicesorting.txt. It’s located in your BMS install in the user/config folder.
The contents of this file is a list of joysticks attached to your system when BMS runs. You need to place thrustmaster combine at the top of that list. You can open this file with notepad, copy and past thrustmaster combine to the top of the list and save the file. -
Check this post in this thread. https://www.benchmarksims.org/forum/showthread.php?8147-Morphine-s-Profile&p=441860&viewfull=1#post441860
It will show you an example of what it looks like. Obviously yours will reflect the equipment you have plugged in.
-
Thanks for your advice!
I followed the instructions for the new profile, but I still have some issues in managing it.
My speedbrake does not work and still … I can not move from one MFD to the other with the SOI command …This is my code:
{0402044F-0000-0000-0000-504944564944} “Joystick - HOTAS Warthog”
{0404044F-0000-0000-0000-504944564944} “Throttle - HOTAS Warthog”
{076406A3-0000-0000-0000-504944564944} “Saitek Pro Flight Combat Rudder Pedals”
{FFFF044F-0000-0000-0000-504944564944} “Thrustmaster Virtual Game Controller (root)”I should also configure my DTE … do you have a .ini file to provide?
Thank you
-
Thanks for your advice!
I followed the instructions for the new profile, but I still have some issues in managing it.
My speedbrake does not work and still … I can not move from one MFD to the other with the SOI command …This is my code:
{0402044F-0000-0000-0000-504944564944} “Joystick - HOTAS Warthog”
{0404044F-0000-0000-0000-504944564944} “Throttle - HOTAS Warthog”
{076406A3-0000-0000-0000-504944564944} “Saitek Pro Flight Combat Rudder Pedals”
{FFFF044F-0000-0000-0000-504944564944} “Thrustmaster Virtual Game Controller (root)”Thank you
You need to edit that file and reorder so it looks like this
{FFFF044F-0000-0000-0000-504944564944} “Thrustmaster Virtual Game Controller (root)”
{076406A3-0000-0000-0000-504944564944} “Saitek Pro Flight Combat Rudder Pedals”
{0402044F-0000-0000-0000-504944564944} “Joystick - HOTAS Warthog”
{0404044F-0000-0000-0000-504944564944} “Throttle - HOTAS Warthog”Otherwise your buttons will not function as described in the profile.
-
thank you, I’ll let you know!;)
-
I followed the instructions, but the profile still does not work perfectly. I still have problems with the air brakes and the rest does not match the commands shown ….
-
I followed the instructions, but the profile still does not work perfectly. I still have problems with the air brakes and the rest does not match the commands shown ….
Run the script, open the joystick control panel in windows, what joysticks does windows detect? The only devices windows should detect is the virtual device, and the rudder pedals. If the joystick and throttle show up, the profile won’t work. Also from your devicesorting.txt I can see you’re running an older version of target. I made a version of the profile for older versions of target. That may help, the link is below.
https://www.dropbox.com/sh/4l2j2sbbkkmwoaa/AAAMks8YYDvUsOQ6vr7bi5bia?dl=0I know you had an issue in the past with this profile, it works, as long as target hides the physical joystick from windows. I used it last night. If you load the key file provided in game and have target running properly it will work. I can’t tell what you’re doing wrong so it is difficult to provide you with guidance.
-
There is an issue where , if you previously had entered BMS without TARGET running, then it will add the Stick and Throttle to your DeviceSorting.txt file. just open it up and you should see them there, besides the Thrustmaster Combined device. remove them and put the Combined device at the top, then save that file again
-
There is an issue where , if you previously had entered BMS without TARGET running, then it will add the Stick and Throttle to your DeviceSorting.txt file. just open it up and you should see them there, besides the Thrustmaster Combined device. remove them and put the Combined device at the top, then save that file again
Once it’s working, right click on devicesorting.txt and make it read only. Saves from having to repeat the dance.
-
hello from France
I have a problem with the version of “Warthog_BMS_Full_4.tmc” from the Dropbox.
If I run this file after 1 or 2 s my whartog no longer respond. In Falcon or in windows.
Button and axes freeze.
Like older post button config for airbrake isn’t on the good button.
If I run “FalconBMS-Warthog.tmc” from Morphine’s site. My Warthog is okThe devicesorting file is ok
Thanks for the response
-
hello from France
I have a problem with the version of “Warthog_BMS_Full_4.tmc” from the Dropbox.
If I run this file after 1 or 2 s my whartog no longer respond. In Falcon or in windows.
Button and axes freeze.
Like older post button config for airbrake isn’t on the good button.
If I run “FalconBMS-Warthog.tmc” from Morphine’s site. My Warthog is okThe devicesorting file is ok
Thanks for the response
Are you loading the keyfile from the Dropbox in game? Also which version of target are u running?
-
Are you loading the keyfile from the Dropbox in game? Also which version of target are u running?
Hello
I’m loading the profile before the game and i have the last version of target.So I read message above but it’s too late in the night for me
I’ll try to compilate the script and i’ll come back my result here