Morphine's Profile
-
Thanks for your advice!
I followed the instructions for the new profile, but I still have some issues in managing it.
My speedbrake does not work and still … I can not move from one MFD to the other with the SOI command …This is my code:
{0402044F-0000-0000-0000-504944564944} “Joystick - HOTAS Warthog”
{0404044F-0000-0000-0000-504944564944} “Throttle - HOTAS Warthog”
{076406A3-0000-0000-0000-504944564944} “Saitek Pro Flight Combat Rudder Pedals”
{FFFF044F-0000-0000-0000-504944564944} “Thrustmaster Virtual Game Controller (root)”Thank you
You need to edit that file and reorder so it looks like this
{FFFF044F-0000-0000-0000-504944564944} “Thrustmaster Virtual Game Controller (root)”
{076406A3-0000-0000-0000-504944564944} “Saitek Pro Flight Combat Rudder Pedals”
{0402044F-0000-0000-0000-504944564944} “Joystick - HOTAS Warthog”
{0404044F-0000-0000-0000-504944564944} “Throttle - HOTAS Warthog”Otherwise your buttons will not function as described in the profile.
-
thank you, I’ll let you know!;)
-
I followed the instructions, but the profile still does not work perfectly. I still have problems with the air brakes and the rest does not match the commands shown ….
-
I followed the instructions, but the profile still does not work perfectly. I still have problems with the air brakes and the rest does not match the commands shown ….
Run the script, open the joystick control panel in windows, what joysticks does windows detect? The only devices windows should detect is the virtual device, and the rudder pedals. If the joystick and throttle show up, the profile won’t work. Also from your devicesorting.txt I can see you’re running an older version of target. I made a version of the profile for older versions of target. That may help, the link is below.
https://www.dropbox.com/sh/4l2j2sbbkkmwoaa/AAAMks8YYDvUsOQ6vr7bi5bia?dl=0I know you had an issue in the past with this profile, it works, as long as target hides the physical joystick from windows. I used it last night. If you load the key file provided in game and have target running properly it will work. I can’t tell what you’re doing wrong so it is difficult to provide you with guidance.
-
There is an issue where , if you previously had entered BMS without TARGET running, then it will add the Stick and Throttle to your DeviceSorting.txt file. just open it up and you should see them there, besides the Thrustmaster Combined device. remove them and put the Combined device at the top, then save that file again
-
There is an issue where , if you previously had entered BMS without TARGET running, then it will add the Stick and Throttle to your DeviceSorting.txt file. just open it up and you should see them there, besides the Thrustmaster Combined device. remove them and put the Combined device at the top, then save that file again
Once it’s working, right click on devicesorting.txt and make it read only. Saves from having to repeat the dance.
-
hello from France
I have a problem with the version of “Warthog_BMS_Full_4.tmc” from the Dropbox.
If I run this file after 1 or 2 s my whartog no longer respond. In Falcon or in windows.
Button and axes freeze.
Like older post button config for airbrake isn’t on the good button.
If I run “FalconBMS-Warthog.tmc” from Morphine’s site. My Warthog is okThe devicesorting file is ok
Thanks for the response
-
hello from France
I have a problem with the version of “Warthog_BMS_Full_4.tmc” from the Dropbox.
If I run this file after 1 or 2 s my whartog no longer respond. In Falcon or in windows.
Button and axes freeze.
Like older post button config for airbrake isn’t on the good button.
If I run “FalconBMS-Warthog.tmc” from Morphine’s site. My Warthog is okThe devicesorting file is ok
Thanks for the response
Are you loading the keyfile from the Dropbox in game? Also which version of target are u running?
-
Are you loading the keyfile from the Dropbox in game? Also which version of target are u running?
Hello
I’m loading the profile before the game and i have the last version of target.So I read message above but it’s too late in the night for me
I’ll try to compilate the script and i’ll come back my result here
-
Hello
I’m loading the profile before the game and i have the last version of target.So I read message above but it’s too late in the night for me
I’ll try to compilate the script and i’ll come back my result here
The profile consists of two files. One that target runs called Warthog_BMS_Full_4.tmc and another file called BMS_Full_&_Morphine.key. The .key file needs to be loaded in game for the profile to work. Open the in game setup, click on controllers, then hit load on the bottom right, next select load, find the .key file you downloaded from the dropbox, Finally hit apply and exit. You will now have to rebind your control axis in game. Please refer to the FlightControlTab.png and AvionicsControlTab.png in the dropbox for a reference.
If your devicesorting.txt is properly setup and the keyfile is loaded; and you still have binds that do not match, then target has likely bugged. The most likely cause of this bug is teamspeak. To fix this bug you must restart windows, then load the profile. The profile should take less than a second to initialize. If it hangs for more than minute than target has bugged. If this occurs, power off your PC, change the USB ports of your HOTAS, reboot and try to launch the profile again. You must start target first, if you start teamspeak before target, target will bug and the profile will not work.
If everything is setup properly and your axis do not respond, it is most likely because you have not bound the axis properly in game.
If you still cannot get it to work, please post the version number of target you are running and the contents of devicesorting.txt here.
-
The old profile no longer works. You need to use the latest version available here. https://www.dropbox.com/sh/66rd8borl2zrfbd/AAAnvz5u93ebm0Tzh322Vw6ba?dl=0
Hey this new Coolie-switch settings are not very TrackIR-style. is there a toggle for the older V1 style coolie? any tips on how i can bring that back? thanks for the great profile
-
Hey this new Coolie-switch settings are not very TrackIR-style. is there a toggle for the older V1 style coolie? any tips on how i can bring that back? thanks for the great profile
Not sure what you mean by TrackIR style.
The coolie hat sends the sim directx buttons, ie joystick buttons. You can easily rebind the base layer in the game to your liking, those should be buttons 20 through 23. To rebind the shifted layer you’ll need to edit the .key file. In there look for 277, 278, 279, 280 and change the callbacks to whatever you like.
-
thanks thats useful. great work on this
-
Thanks for a brilliant profile Morphine, it works a treat on my Warthog Stick and Throttle. I have the VTOL nozzles for the Harrier mapped to my POV switch as well.
-
I’m just getting started with the Warthog (flew F4 years ago) and am looking for this key file. I found a link to dropbox from another source, but it returned an error. Is this file still available somewhere?
Thanks!
-
I’m just getting started with the Warthog (flew F4 years ago) and am looking for this key file. I found a link to dropbox from another source, but it returned an error. Is this file still available somewhere?
Thanks!
https://www.dropbox.com/sh/66rd8borl2zrfbd/AAAnvz5u93ebm0Tzh322Vw6ba?dl=0
-
-
Hey everyone i have a small issue with the profile, each time i press on MSU my zoom/fov is reset.
while in mid flight it can really be annoying can anyone help me to resolve this?this is the command bound to the DX.
MapKeyIO(&Throttle, MSU, DX27, CHAIN( MOUSE_CENTER, DX27));
-
Hey everyone i have a small issue with the profile, each time i press on MSU my zoom/fov is reset.
while in mid flight it can really be annoying can anyone help me to resolve this?this is the command bound to the DX.
MapKeyIO(&Throttle, MSU, DX27, CHAIN( MOUSE_CENTER, DX27));
Mouse center is causing the FOV to go back to default. It should only call middle mouse button if mic switch up and the joystick pinky button are held down at the same time. If u want to change this, edit your FOV commands to something other than the mouse, edit falcon bms.cfg and either delete or edit “set g_sMiddleButtonFunction”, and or edit the target script and change mouse_center to something useful.
The only reason it’s in there is that it’s a legacy call back for teamspeak whisper, so there’s no loses in changing it.
-
Thanks Morphine for your nice profile really like it,anyway i would love to
make few changes for coolie switch and mic switch.Does anybody know how to do it?COOLIE SWITCH
unshift
u=SimTransmitCom1
d=SimTransmitCom2
r=SimCommsSwitchRight
l=SimCommsSwitchLeft
shifted
su=AWACSRequestPicture
sd=AWACSDeclare
sr=AWACSRequestTanker
sl=ATCRequestEmergencyClearanceMIC SWITCH
unshift
u=range knob up
d=range knob down
r=antena elevation up
l=antena elevation down
shifted
su=SimRadarRangeStepUp
sd=SimRadarRangeStepDown
sr=FOVToggle
sl=ToggleNVGMode
push=cursor zero
push shifted=cursor enableAs i am totally noob for that any help is welcome,
thanks.