Falcon BMS Alternative Launcher (Easy Setup, Keep Joystick Assignments)
-
Hi folks,
just recently installed the launcher and so far, I am very happy with it.
Would anyone be so kind as to share a BMS_Full key file?
I am trying to setup my controls as in Morphines Target profile, but I get lost at the different callbacks and functions.
Thank you very much in advance
Chris -
Well, I got most of the stuff set up now.
Only having problems binding like the pinky switch to switching the pos. and nav lights at once.
Also, the launcher keeps crashing on me quite often, which just recently led me to cancel a flight as I had none of the buttons working.
Is there any way to fix this issue?
-
Hi folks,
just recently installed the launcher and so far, I am very happy with it.
Would anyone be so kind as to share a BMS_Full key file?
I am trying to setup my controls as in Morphines Target profile, but I get lost at the different callbacks and functions.
Thank you very much in advance
ChrisIf you want to run Morphine’s profile just follow all steps from here. https://www.benchmarksims.org/forum/showthread.php?32399-A-Guide-to-Morphine’s-Profile-for-BMS-4-33-and-Beyond
There is a fix for the target issues. Though you’ll have to delete the .key file that the launcher created. Otherwise you’ll have issues.
-
Using both someone else’s profile and this launcher at the same time may cause problems. Profile often contains key file they have created, and my app overwrites them every time launching BMS. It won’t work properly.
-
Using both someone else’s profile and this launcher at the same time may cause problems. Profile often contains key file they have created, and my app overwrites them every time launching BMS. It won’t work properly.
Sorry if it wasn’t clear, but running one or the other was what I was advocating.
-
Yeah. So far, I have been trying numerous fixes to make target work again with 1706, but to no avail.
This is the reason why I switched to the Alternate launcher.
So far, everything is bound correctly, I am just somewhat struggling with all the invoke commands.
-
Then again, I uninstalled the old key-file for target as well as the .tmc file.
Still, the launcher keeps “unbinding” my controls in mid-flight, which just annoys me.
-
Unbind while flying?
Perhaps, do that occur when you use pinky shift?
Or if you are using TARGET, isn’t it disconnecting “Thrustmaster Combined”? -
I don’t know if it only occurs when I use the DX shift.
Currently, I am NOT using target. I uninstalled the key-file and the tmc-file, as I would like to only work with the alternate launcher.
It seems like the program is terminated while I am in-flight, for whatever reason.
Could it be possible that the current version of the launcher is somewhat bugged?
IIRC, I read something like that on page 8 and 9 of this thread.
Greetings
Chris -
Alternative Launcher will be minimized and could not open until you close BMS. That’s OK.
The Launcher will overwrite config files when launching BMS, and BMS loads config files before flying.
After that, there is nothing the launcher can do, like unbind keys while you are flying.If you lost your key bind while flying and somehow any joystick button becomes unassigned to any callback, that might be BMS’s pinky shift glitch. If you press DX button where you assigned “STICK: Pinky Button (DX Shift)” longer than a second, without pushing any other DX buttons, BMS will keep DX layer shifted.
-
Thank you for your effort my friend. Everything is working fine except AxisAssign on my PC. It cant recognize my saitek x56. When starting hub, it says ‘awaiting inputs’. However, when I open the BMS setup section, BMS can recognize my stick and thrtolle. What should I do? Thank you.
-
Mhh, ok.
So you think that unbinding the DX-shift should resolve the problem?
What, if it still persists?
I wonder if the backup of the key-file screwed things up.
I always made a backup after any changes that I have done, but despite keeping it in the same folder, I always renamed it.
I also noticed that the launcher sometimes keeps crashing on me when I exit BMS, for whatever reason.
-
Mhh, ok.
So you think that unbinding the DX-shift should resolve the problem?
Don’t release pinky if you hold it but still not commanding any other shifted DX bind.
For instance, If you assign…
STICK: Pinky Button (DX Shift) | DX3 STICK: TMS UP | SHIFT DX7
If you short press DX3 for Pinky, it’s OK. This is “DX3” command. Pinky will be called.
If you hold press DX3 and press DX7, it’s OK. this is “SHIFT DX7” command. and TMS UP will be called.
If you hold press DX3 but release it without pressing any other button you have assigned “SHIFT DX n”, this will stuck your DX assignment to shifted layer. So even after releasing DX3, any “DX n” button you press will be “SHIFT DX n”.In this case, assigning following will fix the problem.
STICK: Pinky Button (DX Shift) | DX3, SHIFT DX3
Try assigning like above, And if you accidentally hold but released DX3, simply do the same thing again. DX layer will be back to unshifted.
What, if it still persists?
We have to look for another reason causing a problem.
I also noticed that the launcher sometimes keeps crashing on me when I exit BMS, for whatever reason.
I will terminate the launcher after launching BMS in next update.
-
Thank you for your effort my friend. Everything is working fine except AxisAssign on my PC. It cant recognize my saitek x56. When starting hub, it says ‘awaiting inputs’. However, when I open the BMS setup section, BMS can recognize my stick and thrtolle. What should I do? Thank you.
Do you mean you can’t assign any axis even you move the stick or dials at ‘awaiting inputs’ window?
-
Do you mean you can’t assign any axis even you move the stick or dials at ‘awaiting inputs’ window?
OK. I solved the problem by re-installing the x56 driver.
How can I use 4.32 KEYSTROKES instead of 4.33 BMS keystrokes on this launcher? Is that possible?
-
How can I use 4.32 KEYSTROKES instead of 4.33 BMS keystrokes on this launcher? Is that possible?
Are you going to use 4.32 key file for BMS 4.33?
or are you asking me if you can use the launcher for 4.32? -
Are you going to use 4.32 key file for BMS 4.33?
or are you asking me if you can use the launcher for 4.32?I want to use 4.32 key file named ‘‘keystrokes’’
-
Copy the key file you want to use from 4.32 folder to 4.33 User/Config and rename it as “BMS - FULL.key” might work, but I don’t recommend it. I can’t promise the launcher or BMS to work properly.
-
Some of 4.32 callbacks do not work any more on 4.33 … so using 4.32.key is more that “not recommanded”. So now, do what you want despite all the dev recommendations … but please do make us loosing our time and don’t post anything into the Support room and do not report for bug please.
-
This post is deleted!