Solved Jc1 Profile
-
Due to typos in the illustrations of the joystick (POV trim/views reversed) and throttle(MIC switch missing a line), I uploaded corrected versions of the illustrations.
Available via post #1 of this thread, “jc1 Profile”.
jc1 -
Version 4.10, 02/23/2018
Important changes to jc1.key
This will eliminate the big gun sound heard in the open cockpit when pressing the paddle key (S4)
or when pressing the paddle key in outside views, and the other keys that were affected.
These changes are based on BMS Key File Manual.pdf p6-22 “In the key files, for DX button callbacks,
the former “mod1” field (last entry in a DX row, always 0 in the past) will now serve as sound ID to
determine the KEY_DOWN sound to be played when activating the callback. The sound IDs can be found
in the f4sndtbl.txt. Sound can be deactivated with “-1”. Also the value “0” activates no sound as
no sound file is assigned.”
SimHotasPinkyShift 3 -1 -2 0 0x0 -1 //DX4 on the paddle
SimAPOverride 2 -1 -2 0 0x0 -1 //DX3 on the pinky
SimSlapSwitch 18 -1 -2 0 0x0 314
SimMPO 25 -1 -2 0 0x0 115
SimHotasPinkyShift 259 -1 -2 0 0x0 -1 //DX4 on the paddle
SimAPOverride 258 -1 -2 0 0x0 -1 //DX3 on the pinky
SimRadarAGModeStep 262 -1 -2 0 0x0 126
SimRadarSnowplow 263 -1 -2 0 0x0 126
SimNextAGWeapon 264 -1 -2 0 0x0 126
SimHSDRangeStepUp 266 -1 -2 0 0x0 126
SimNextWaypoint 267 -1 -2 0 0x0 126
SimHSDRangeStepDown 268 -1 -2 0 0x0 126
SimPrevWaypoint 269 -1 -2 0 0x0 126
OTWStepNextPadlockAA 277 -1 -2 0 0x0 -1
OTWSelectEFOVPadlockMode 279 -1 -2 0 0x0 -1
Other sound corrections
SimRightAPMid 320
SimICPTILS 122
SimICPALOW 122
SimICPTHREE 122
SimICPStpt 122
SimICPCrus 122
SimICPSIX 122
SimICPMark 122
SimICPEIGHT 122
SimICPNINE 122Minor editing changes to jc1.tmc
from Unshifted Long CSD to Unshifted CSD
from USE jc1.key in Falcon BMS 4.33.1 to USE jc1.key in Falcon BMS 4.33.4Corrected jc1.key and jc1.tmc are available via post #1 of this thread, “jc1 Profile”.
jc1
-
Version 4.11, 03/02/2018
Changed switching for EPU.
Moved TIR Pause from Shifted H4P to Shifted H4R.
Related changes to jc1.tmc, jc1.key, jc1_Device_Text.pdf, jc1_Device_Joystick.pdf and jc1_Device_Throttle.pdf.
Files available via post #1 of this thread, “jc1 Profile”.jc1
-
//Version 4.20 03/08/2018
jc1.key Additions to BMS - Full.key
SimDigitalBUPOff
SimAltFlapsNormjc1.key Changes to BMS - Full.key
From SimDigitalBUP to SimDigitalBUPBackup
From SimAltFlaps to SimAltFlapsExtendIf Autopilot backlight is on, it will go off if Fuel Door is opened, or Landing Gear is lowered, or Trim/AP is moved to DISC,
or MPO is moved to Override, or DBU is moved to On, or AltFlaps is moved to extended.If Autopilot backlight is off, it will not go on if Fuel Door is open, or Landing Gear is down, or Trim/AP is DISC, or MPO is Override,
or DBU is On, or AltFlaps is extended.Autopilot backlight is unchanged for AOA > 15°, A/P failure or FLCS failure, or Stall Horn active.
Related changes to jc1.tmc, jc1.key, jc1_Device_Text.docx, jc1_Device_Joystick.pdf, jc1_Device_Throttle.pdf,
jc1_Keyboard_Key Codes.pdf, jc1_Keyboard_Key Labels.pdf. Files available via post #1 of this thread, “jc1 Profile”.jc1
-
Version 4.21 03/09/2018
Fixed gGear. Should be initialized on.
The Autopilot backlight will be on/off for the A/P limits Fuel Door, Gear, Trim, MPO, Flaps.
The Autopilot backlight will remain on for the A/P limits DBU, AOA > 15°, A/P or FLCS failure, and Stall Horn.
Related changes to jc1.tmc. Files available via post #1 of this thread, “jc1 Profile”.jc1
-
Version 4.22, 03/10/2018
Regrettably, due to Thrustmaster Target script limitations, I have to remove the A/P Gear limit from synchronization
with the backlight. TM script cannot determine beforehand whether you start in the air or on the ground. Therefore,
it’s not possible to correctly code the gear limit. An undesirable alternative would be to have separate .tmc files.
A similar situation occurred with the DBU limt; TM script can’t tell beforehand whether the jet you fly has DBU. And
there’s no way for TM script to identify AOA > 15°, A/P or FLCS failure and Stall Horn. So the only A/P limits
synchronized with backlight are Door, Trim, MPO and Flaps.Related changes to jc1.tmc. Files available via post #1 of this thread, “jc1 Profile”.
-
Version 4.23, 03/21/2018
For bullseye intercepts, I found that I needed FCR range increase/decrease more than I needed customviews. I put FCR
range increase (L-OSB-20) on Shifted H4U and FCR range decrease (L-OSB-19) on Shifted H4D. The one customview view I
like is the heads down and I toggle it with Shifted H4L. And since I didn’t need two engine start switches, I
changed Engine Operate Right: EORIGN from SimJfsStart to AFCanopyToggle. Finally, I removed the big gun sound effect
from AwacsVectorToThreat, Shifted MSL.Related changes to jc1.tmc, jc1.key, jc1_Device_Text.docx, jc1_Device_Joystick.pdf, jc1_Device_Throttle.pdf
are available via post #1 of this thread, “jc1 Profile”. -
Version 4.34, 08/29/2019
Updated for Falcon 4.34. Started with the new BMS-Full.key file and made changes there. The changes to my previous setup are:
Coolie Switch
Unshifted CSU Motion Freeze
Unshifted CSD TrackIR-Pause
Shifted CSU Custom View Toggle
Shifted CSD Pilot ToggleMIC Switch
Unshifted MSR ICPCom1
Unshifted MSL ICPCom2
Shifted MSR Next Waypoint
Shifted MSL Prev WaypointDMS Switch
Shifted H3R RadarRange Up
Shifted H3L RadarRange DownCMS Switch
Shifted H4U Visor Toggle
Shifted H4R Glance Forward
Shifted H4D Night Vision Toggle
Shifted H4L DoNothingVoice commands mapped to Warthog were removed as I started using Voice Attack.
All my files are available via post #1 of this thread, “jc1 Profile”.
-
Version 4.34.1, 11/12/2019
After learning the correct way to loft GP and Laser bombs (speed over 500 KTS and AB if necessary), I made the following changes:
11/12/19 Changed Shift SC to SimDoNothing
11/12/19 Changed Shift CHB to SimRadarCursorZero
11/12/19 Changed Shift LTB to Toggle AVTR on/offAll my files are available via post #1 of this thread, “jc1 Profile”.
-
Version 4.34.3, 03/20/2020
I found that my MIC switch, Shift Right and Left for Next/Prev Waypoints frequently interfered with UnShift Right and Left for ICP Com1 and ICP Com2. So I made the following changes:
changed Slew Control: SC DX21 to keyfile controlled.
changed Shift MSR from SimNextWaypoint to SimDoNothing
changed Shift MSL from SimPrevWaypoint to SimDoNothing
changed Shift CSU from OTWToggleCustom3dPitView to SimPrevWaypoint
changed Shift CSD from SimPilotToggle to SimNextWaypoint
changed Shift CSL from OTWSelectHUDMode to SimPilotToggleAll my files are available via post #1 of this thread, “jc1 Profile”.
-
Version 4.34.31, 03/26/2020
In the General Discussion Forum, 2nd post of the ADV Mode topic, Blu3wolf recommended a change for MPO (Manual Pitch Override). I took his recommendation and made the following changes:
changed EORMOTOR from SimMPO to AFCanopyToggle
changed EORIGN from AFCanopyToggle to SimMPOToggleAll my files are available via post #1 of this thread, “jc1 Profile”.
-
Version 4.34.4, 05/28/2020
Made changes for the MIC switch and AVTR switch. I wanted AVTR to cycle through Auto/Record/Off. And the MIC to follow the illustration for the IDM (Improved Data Modem) in Dash-34 p94. The changes to my key and tmc files are:
Uncomment SimAltFlaps
Comment SimAltFlapsNorm because code is used for SimIFFBackupM1DigitInc
Comment SimAltFlapsExtend
Comment SimAVTRSwitchOn 115 0 0x21 0
Comment SimAVTRSwitchOff 115 0 0x21 4
Uncomment SimAVTRSwitch 115 0 0x21 4
changed Shift LTB from On/Off to Cycle (To Use: 2 presses for AUTO, next press RECORD, next press OFF)
changed Shift MSU from SimTransmitCom1 to SimDoNothing
changed Unshift MSU from SimTransmitCom1 changed to SimICPCom2 VHF
changed Unshift MSR from SimICPCom1 to SimCommsSwitchRight A-G operations
changed Shift MSD from SimTransmitCom2 to SimDoNothing
changed Unshift MSD from SimTransmitCom2 to SimICPCom1 UHF
changed Unshift MSL from SimICPCom2 to SimCommsSwitchLeft A-A operations
changed BMS Setup Screen for Simulation-Padlocking from Realistic to DisabledAll my files are available via post #1 of this thread, “jc1 Profile”.
-
Version 4.34.5, 05/29/2020
This is a quick update because I made a mistake yesterday in v4.34.4. I incorrectly coded the COM ICP controls for UHF/UVF transmission. That’s fixed in this update. And while I’m at it, I made a few other changes that I would get around sooner or later. Might as well be now. Here’s today’s changes:
changed Shift H2L from SimCBEOSB_9L to OTWCheckSix
changed Shift H2D from SimNextAGWeapon to SimRadarSnowplow
changed Shift H2R from SimRadarSnowplow to OTWGlanceForward
changed Shift H4R from OTWGlanceForward to SimDriftCO
changed Unshift MSU from SimICPCom2 to SimTransmitCom2
changed Unshift MSD from SimICPCom1 to SimTransmitCom1All my files are available via post #1 of this thread, “jc1 Profile”.
-
Version 4.35, 12/23/20
changed SimParkingBrakeToggle to SimParkingBrakeCycle. keyfile change for 4.35
changed SimLandingLightToggle to SimLandingLightCycle. keyfile change for 4.35
changed BMS UI Setup/Controller/Advanced/Avionics Control for Cursor X and CursorY Deadzones to None
changed jc1.tmc Axis Controls, SetSCurve for SCX and SCY, from (0, 0, 0, 0, -2) to (20, 5, 20, 0, -2)
changed Shift CSL from SimPilotToggle to OTWSelectSatelliteMode
changed EORMOTOR AFCanopyToggle to SimPilotToggle
changed PSB switch so that PSB-Forward would turn off the Collision Lights
changed Shift H2U from SimRadarAGModeStep to SimECMOn (Jammer)
changed Shift H2R from OTWGlanceForward to SimNextAGWeapon
changed Shift H2L from OTWCheckSix to SimRadarAGModeStepAll my files are available via post #1 of this thread, “jc1 Profile”.
-
Version 4.35.1, 12/29/20
changed APDIS Shifted from SimParkingBrakeCycle to SimTrimApDisc
changed APDIS Unshifted from SimTrimApDisc to SimParkingBrakeCycle
Removed all LED and backlight code related to Autopilot because I found out Thrustmaster Target tmc code can’t access Windows shared memory, which is needed to properly handle all Autopilot limits
Provided LED and backlight code for the AVTR functions on Shift LTB. LED1=AVTR ON, (LED1 & LED2)=AVTR AUTO, (No LED)=AVTR OFFAll my files are available via post #1 of this thread, “jc1 Profile”.
-
Hello jc1.
The link provided in post #1 not valid?Thanks
-
-
Version 4.35.2, 01/09/21
Corrections:
in jc1.key corrected typo for SimNextAGWeapon changed 263-1 to 263 -1
in jc1.key uncommented SimToggleTFR
in jc1.key changed SimRFQuiet 310 0 0x1e 2 0 0 1 to SimRFQuiet 310 0 0x20 2 0 0 1The corrections caused changes for:
jc1.tmc
jc1.key
jc1_Keyboard_Key Codes-4.35.2.pdf
jc1_Keyboard_Key Labels-4.35.2.pdfNo changes to Joystick or Throttle images are required.
All my files are available via post #1 of this thread, “jc1 Profile”.
-
hi, not sure if im doing something wrong, i load the file in target, test it everything is working, i go into the game load the profile all the mapping works for is the throttle and not the stick, only trim works.
-
hi, not sure if im doing something wrong, i load the file in target, test it everything is working, i go into the game load the profile all the mapping works for is the throttle and not the stick, only trim works.
Everything I got is working fine but I’m not sure what you tested.
Did you put jc1.key in Falcon BMS 4.35\User\Config
Did you put jc1.tmc in C:\Program Files (x86)\Thrustmaster\Target\scripts
Does the BMS Setup/Controller show Thrustmaster Combined
Does your first line in Falcon BMS 4.35\User\Config\DeviceSorting.txt have Thrustmaster Combined
Does the Target Device Analyzer show the switches and buttons working
Does BMS Setup/Controller show the keypresses in the Input section of the screen