[BMS Tool] Afterburner Detent Sounds
-
@CriticalMass I think it did not work because there is no callback for AB detent when you increase or decrease the throttle. The callbacks that you mention above I believe are for when Setting the AB detent, not for when the throttle reaches that position. My solution still works, you can increase the volume of the default pushbutton sound.
-
@danaos75 Oh, I see, so a general increase for ALL uses of the pushbutton?
Out of curiosity, and reading the comments in the ‘F4SndTbl.textproto’ file, but it says that the max_vol is only used for external sounds
#### max_vol: # (1) Unused (keep 0 as default value) # (2) This is volume at MaxFeet, it only effects external sounds.
also this
# The volume is expressed in hundredths of a decibel and ranges from 0 (full volume) to -10,000 # (completely silent). # # The decibel scale is not linear, so you may reach effective silence well before the volume setting # reaches true silence at -10,000.
so a value of 10000 should have no, or a detrimental, effect.
-
@CriticalMass I read that too but for whatever reason it works. I also have a better one for you. If you want the Gear up - Down sound for your AB detent, then just keep the original sound files (PushButton_In.ogg, PushButton_out.ogg) as a backup and delete them. Then copy paste and rename the Gear Up - Down sound files to Pushbutton In - out respectively. That way the AB detent uses the Gear Up / Down sound for AB Detent. Of course all pushbutton sounds will sound like that , but I only found 2 pushbuttons that have that sound, on Test panel “Fire & OHeat detect” and “Mal & Ind Lts”. That’s what I did and it works great. The Gear up down sound is perfect for the AB. Thanks for the suggestion!
-
@danaos75 said in [BMS Tool] Afterburner Detent Sounds:
@CriticalMass I read that too but for whatever reason it works. I also have a better one for you. If you want the Gear up - Down sound for your AB detent, then just keep the original sound files (PushButton_In.ogg, PushButton_out.ogg) as a backup and delete them. Then copy paste and rename the Gear Up - Down sound files to Pushbutton In - out respectively. That way the AB detent uses the Gear Up / Down sound for AB Detent. Of course all pushbutton sounds will sound like that , but I only found 2 pushbuttons that have that sound, on Test panel “Fire & OHeat detect” and “Mal & Ind Lts”. That’s what I did and it works great. The Gear up down sound is perfect for the AB. Thanks for the suggestion!
Great workaround, thanks!
So it does look like ABDetent sound is hardcoded.
perhaps the devs (very low priority) could implement this (note: the key is now a number not a boolean)
set g_nAfterburnerDetentClick 314 // Makes the clicks when the throttle passes the afterburner detent use the sound (index) identified by the value [Default is 0 (no sound)]
-
@mrkline
Fwiiw, your tool was a real savior.
I still use it in 4.36 as the detent click is way too low volume.
Fortunately it still works in 4.36.
Thanks! -
@danaos75
Thank you danaos75 for the detailed graphic to modify the F4SndTbl.textproto file. After a few brief tests, the solution is working well for me.GC
-
@CriticalMass said in [BMS Tool] Afterburner Detent Sounds:
Great workaround, thanks!
So it does look like ABDetent sound is hardcoded.
perhaps the devs (very low priority) could implement this (note: the key is now a number not a boolean)
set g_nAfterburnerDetentClick 314 // Makes the clicks when the throttle passes the afterburner detent use the sound (index) identified by the value [Default is 0 (no sound)]
I think replacing the sound (with something louder or an amplified version) is a great short-term fix. I’ll look into getting it boosted in a future release.
Sounds in BMS are in a bit of a strange state, where the original F4 code clearly intended for sounds to be moddable (via the sound table), but lots of things are now hardcoded. It’s something several folks are interested in fixing, but everything is a question of priority…
-
Thank you for developing this wonderful application, it is very helpful.
One question. I keep two installations of BMS (4.35 and 4.36) . The application is always pointed to the launcher of 4.35 and I always have to manually set the route to the launcher of 4.36 when I open the program. Is there any way to set the default route to 4.36 launcher? -
@CriticalMass now I’m stuck with 440 sounds my last index added is 440 … now successfully i have nozzle stages sounds open and close … i was not able to make it happened if i didn’t link tow index with each other …
The problem now that nozzle sounds is linked with many keyboard switches and it go nice , if look to your wing man because he did not using the same keys u cannot hear the nozzle in it’s different stages.Sorry for my bad English.
-
@tristam299 I don’t believe BMS Burner has been updated for 4.37 but @kampfalk helped me out with this is another thread. Here’s his response…
“It looks for BMS directory in the registry at Computer\HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Benchmark Sims\Falcon BMS 4.35\baseDir. Changing or setting that to the 4.37 install location saves you some trouble.”