EMFL - campaigns for EMF
-
Hi again.
Anyone to help?
I am trying to fly wiht Greece and the aircrafts dont have Greek skins…is this nomral?
-
Thank you!
-
I got everything cleared up now. Once small hickup.
I selected Double Front, chose Greece adn flying with 521st sq. from Elefsina… Automatic skins of the F16 Bl 52+ CFT belong to sq 343 Star. However when i get in the pit (I am in VR mode) the aircraft if I look to the right or the left, has no wings! I can see the shades of the wings but not the wings themselves.
I suppose this is a bug and watned to report it.
Thanks
N -
@Anakin051177 said in EMFL - campaigns for EMF:
I got everything cleared up now. Once small hickup.
I selected Double Front, chose Greece adn flying with 521st sq. from Elefsina… Automatic skins of the F16 Bl 52+ CFT belong to sq 343 Star. However when i get in the pit (I am in VR mode) the aircraft if I look to the right or the left, has no wings! I can see the shades of the wings but not the wings themselves.
I suppose this is a bug and watned to report it.
Thanks
NAll good here. I suspect install messing with folders not being respected as written in the original post (suspicions fed by the reading of previous posts here…)
-
When flying the HAF F-16C BLOCK 52+ CFT, the wings are invisible when viewed from inside the cockpit. Any idea what might be causing it? I’ve only noticed this to happen with this specific aircraft out of all single-seat B52 CFT-equipped aircraft. Might apply to two-seaters or other Air Forces’ F-16s as well, but I’m not sure.
-
@Anakin051177 and @VooDoo3 Try this, it might help:
Go to the theatre folder (Korea, Add-On EMF or Add-On EMFL, witch ever you use) \Art\CkptArt\F-16C-52+ CFT and open the 3dckpit file. Replace the value of cockpitwingsmodel from what ever it is to 1773 and save it. Just to be on the safe side, for the EMF and EMFL theatres, do it for the HAF F16C B52+C folder as well (it also uses the 343 skin). For the non CFT model, if you ever come across to it and want to fly it, replace the value with 1772.
In general, these are the correct values for the HAF Blk52+ with and without CFTs respectively. In my original installation they were wrong and I had to change them manually.And of course, needless to say, do NOT alter any files without having them backed up.
-
@skippermike said in EMFL - campaigns for EMF:
@Anakin051177 and @VooDoo3 Try this, it might help:
Go to the theatre folder (Korea, Add-On EMF or Add-On EMFL, witch ever you use) \Art\CkptArt\F-16C-52+ CFT and open the 3dckpit file. Replace the value of cockpitwingsmodel from what ever it is to 1773 and save it. Just to be on the safe side, for the EMF and EMFL theatres, do it for the HAF F16C B52+C folder as well (it also uses the 343 skin). For the non CFT model, if you ever come across to it and want to fly it, replace the value with 1772.
In general, these are the correct values for the HAF Blk52+ with and without CFTs respectively. In my original installation they were wrong and I had to change them manually.And of course, needless to say, do NOT alter any files without having them backed up.
Mine are correctly set at 1773.
And this is the exact problem. When viewing from inside the cockpit the wings are missing… -
@Anakin051177 I had the same and I fixed it this way. What theatre are you flying? EMFL, or EMF?
-
@skippermike EMFL, which is why this issue was brought up here.
-
@skippermike issue resolved- the value was indeed not set to 1773 for the HAF F-16C BLOCK 52+ CFT. Setting it (back?) to 1773 made the wings appear again. Many thanks.
-
There are 4 F-16C B52+ (2 with and 2 w/o CFTs) models in the EMF theatre (and possibly the EMFL, but I haven’t tried that). The 2 of them have the HAF in front and the the others don’t. The ones who don’t have the HAF in front seem to be the same with the KTO and they have the 343SQ skin for the model with CFTs and the 340SQ skin for the model w/o CFTs (so, they have HAF skins either way). The others are marked as HAF and IIRC, they have an issue with the cockpit wings model and it has to be changed. They also give you the choice to have the skin of all HAF Blk52+ Squadrons (340, 343 and 337), regardless of the model.
-
@skippermike said in EMFL - campaigns for EMF:
There are 4 F-16C B52+ (2 with and 2 w/o CFTs) models in the EMF theatre (and possibly the EMFL, but I haven’t tried that). The 2 of them have the HAF in front and the the others don’t. The ones who don’t have the HAF in front seem to be the same with the KTO and they have the 343SQ skin for the model with CFTs and the 340SQ skin for the model w/o CFTs (so, they have HAF skins either way). The others are marked as HAF and IIRC, they have an issue with the cockpit wings model and it has to be changed. They also give you the choice to have the skin of all HAF Blk52+ Squadrons (340, 343 and 337), regardless of the model.
Where does one get the choice to use teh skin of all HAF blk 52+ squadrons you mention?
Would love to use 337 instead of 343. How can I change that?
-
@VooDoo3 said in EMFL - campaigns for EMF:
@skippermike EMFL, which is why this issue was brought up here.
To be honest I am on EMFL through the EMF folder.
I had problems with staritng teh campaigns, then someone suggested a fix of pasint ghte values of EMFL fodler into EMF folder and it worked.
So I am getting into the EMF folder but the theater is the EMFL 4.37.3A
I apoligze but I thought they were the same thing. Aren’t they?
-
@Anakin051177 as for the skin selection: When you have the loadout page open, try changing the skin, using the button. If you cannot do it, then the model is one of the original ones that have fixed skins (343 for CFTs and 340 w/o CFTs). In this case try changing via Mission Commander, the aircraft type of your squadron, from F-16C-52+ CFT to the one that has HAF in front of it. I haven’t tried it myself, but it may work.
As for the theatre, you could possibly have done it the other way around, copy and paste EMF into EMFL and have them both, I guess. But in your case, I do not know if it messes with the existing EMF models, I haven’t installed it. So, go to C:\Falcon BMS 4.37\Data\Add-On EMF\Art\CkptArt\F-16C-52+ CFT and C:\Falcon BMS 4.37\Data\Add-On EMF\Art\CkptArt\HAF F16C B52+C (they are both in the Art folder inside the EMF folder, not the Art folder in the Data folder). Then check what I said earlier: in the 3dckpit file the value of cockpitwingsmodel must be 1773. If not replace it.
If this doesn’t work, then it must be something else and I don’t know how to help. But since I had the exact same issue with you and fixed it like this, my money is on this. -
Hi all - one question. Getting on a BARCAP with AIM-9s and IRIS -Ts. Going into the loadout to change to some AIM-120s but cant load any of them. How come? Any ideas?
-
@Anakin051177 there is a time limit before the mission, after which you cannot change the loadout. I don’t remember how much is it. Try changing the loadout more than 30 minutes before takeoff, in order to check if this is the reason.
-
@skippermike You are correct. that worked. Much appreciated.
-
This is happening to me today without having changed anything in my setup.
Once airborne I contact departure. I use voice attack. When I speak the word departure the game CTD. I never had this till today. I tried it 4 times. Same thing.
Anyone experienced that before?
-
To overcome this i decided not to cotnact departure… well that was easy until… I had to get back and contact Approach. CTD again.
No matter if I ue teh voice attack or the keyboard the game crashes… any ideas? -
i checked in Koran Theater and i dont have this problem.
Any ideas please?