Custom modded folder for Aegean Theater
-
Hello Kronik,
Where did you saw the title "Battle for… " in this mod?
As the title of the campaign as viewed in the image(s) you posted…
Thanks for your feedback - silly me I really forgot to put the campaign files in the archive, sorry for that.
First post updated.
Here’s how to start the campaign:
Choose an airbase and sqadron:
http://s26.postimg.org/ewivv3xd5/2014_02_25_220255.jpg….
-
I would like to make a formal request to the authors of this project to change the name of their event (Battle for …) to not create confusion of the authors as all Falcon Online events with the exception of RP6 use the Battle For prefix…
https://www.benchmarksims.org/forum/showthread.php?7330-Aegean-Theatre-DOWNLOAD-AREA
The campaign file names, Battle for Bosphorus/Battle for Athens, are contained in the above download of Aegean Theatre - BMS converted v1.1, released on 11/4/2011.
The actual date of the theater.irc file is 8/14/2011.
These pre-date any release by FO.
C9
-
I tried but no it ctd now and i dont know ehy i’ll try to fix it and repost
-
@Cloud:
https://www.benchmarksims.org/forum/showthread.php?7330-Aegean-Theatre-DOWNLOAD-AREA
The campaign file names, Battle for Bosphorus/Battle for Athens, are contained in the above download of Aegean Theatre - BMS converted v1.1, released on 11/4/2011.
The actual date of the theater.irc file is 8/14/2011.
These pre-date any release by FO.
C9
Didn’t know you guys had it in there from back then…
In any event, I wasn’t requesting this to gain exclusivity on the prefix… Was requesting this because it’s confusing to end users.
You are obviously free to chose whatever title desired, just thinking ahead…
-
http://tempsend.com/254BAAE0AE
This is with .Tri file provided by Cloud 9. Thanks a lot buddy and thanks Cobra for letting me work with that. Its still a work in progress but i would like to share it with all of you! I will try to add some naval units as well later on… I have added some combat groups as well and if you like some exitment try the 130th in Limnos every couple of flights scheduled there is an scrample mission! Enjoy
Any suggestions are welcome as always. Remember is a WIP and my first try. -
http://tempsend.com/254BAAE0AE
This is with .Tri file provided by Cloud 9. Thanks a lot buddy and thanks Cobra for letting me work with that. Its still a work in progress but i would like to share it with all of you! I will try to add some naval units as well later on… I have added some combat groups as well and if you like some exitment try the 130th in Limnos every couple of flights scheduled there is an scrample mission! Enjoy
Any suggestions are welcome as always. Remember is a WIP and my first try.Nobody tested it yet???
-
Nobody tested it yet???
Hello Manos1981
i tried only the folder Campain (some Mo) during last night it’s ok until after 9:00 am .
now on my other hard drive with win7 i’ll install the same folder and test soon.
The reason i only install campain folder is i installed in my all theaters the graphic improvement of Tom Catz
(initially for Korea,unfortunately one problem detected : i didn’t see the taxi at souda,but no bms crash or bug!)thanks for your work
-
Hello Manos1981
i tried only the folder Campain (some Mo) during last night it’s ok until after 9:00 am .
now on my other hard drive with win7 i’ll install the same folder and test soon.
The reason i only install campain folder is i installed in my all theaters the graphic improvement of Tom Catz
(initially for Korea,unfortunately one problem detected : i didn’t see the taxi at souda,but no bms crash or bug!)thanks for your work
Its not my work… the modded folder (Theater) is from Cobra. In the rar file that i posted its only the Save0.cam and Save.tri (Cloud 9 gave me the tri file) for the campaign. Its WIP i still working on it. Most thanks has to go to these guys (Cobra and Cloud) i just changed the OOB in the campaign to be more realistic as for Squadrons and airbases etc… Therefore the tri file is a good start to work on it and still i working on i will add some Naval units also and some more commands in the tri file, also some work on the ground units needed also cause they go very fast on defensive and leaving the borders. It still needs work! But thanks for your kind words!
-
I had a try on these campaign files with no luck…
Its a pitty that a such nice scenery lacks a proper campaign. In fact, IT 0.91 remains the only real proper scenery until now… -
No luck? What do you mean? what problems do u have?
-
No luck? What do you mean? what problems do u have?
Hi,Manos1981
After a new test here is my problems :
1. It seems none of 28 training missions work
2. After a campain mission saved and exit of program, BMS stop working properly (Windows message)
i must close manualy; but no problem during missions (except sam in my backside! :))
3.At Limnos none missions run: after the count down before take off, i see the photo of the f16
(probably at Florennes,take a look at the flag,i think i recognize the wood behind,but perhaps i’m wrong)
30 secondes waiting and it’s the debriefing appears with “mission still in progress”Finaly the frequencies are not the same of the docs navaids of Nikos but i read that i must overwrite with the
proper fieds from hotfix 1.2 (Frequencies+ils stations.dat) but question : in whitch folder? To make quickly
without too searchunfortunately the Aegean 2014 by Tom Catz crash the program on my computer like the excellent work of Nove
for Balkans idems with Balkans v3.0 sky became dark and after some minutes crash. very curiousReally i hope that this theater will interest again the brains of developpement
-
No luck? What do you mean? what problems do u have?
Thank you for your attention and eforts budy!
In my system, campaign isnt generating missions… -
Hi,Manos1981
After a new test here is my problems :
1. It seems none of 28 training missions work
2. After a campain mission saved and exit of program, BMS stop working properly (Windows message)
i must close manualy; but no problem during missions (except sam in my backside! :))
3.At Limnos none missions run: after the count down before take off, i see the photo of the f16
(probably at Florennes,take a look at the flag,i think i recognize the wood behind,but perhaps i’m wrong)
30 secondes waiting and it’s the debriefing appears with “mission still in progress”Finaly the frequencies are not the same of the docs navaids of Nikos but i read that i must overwrite with the
proper fieds from hotfix 1.2 (Frequencies+ils stations.dat) but question : in whitch folder? To make quickly
without too searchunfortunately the Aegean 2014 by Tom Catz crash the program on my computer like the excellent work of Nove
for Balkans idems with Balkans v3.0 sky became dark and after some minutes crash. very curiousReally i hope that this theater will interest again the brains of developpement
Well to tell you the truth i working on it with the stock Aegean (Just the hotfix installed) And i dont have any of theese problems. Did you changed as Cobra says the sliders? and turn off the “set by HQ” ? its in the 3d or 4th post of this thread. The CTD when exiting is a known problem… Anyway try (Wil also you if you want) to run it with the instructions provided by Cobra and repost the results. Even though it is strange cause i’m running it very smoothly and imagine i’m now in Day 6. As for the training missions that is a question to Cobra i’m afraid i cannot help you much. As for the ILS and Frequencies if i remember correct you have to copy them in the Campaign folder.
-
-
Ok!!!
Thanks! -
Wil also try what i say in #70 to RedTiger and post the results…
Hi Manos1981
You gived me an explanation for the known issue at program exit.
For the frequencies I made what Nikos prescripted and it’s ok now!
As Cobra00 said “Turn Set by HQ on”,I turned on,but at Limnos I’ve no missions start and a similar
problem at Nea Anchialos.I’m sure that it’s not the Objects folder from Tom Catz since I’ve no problems
like those at others base or others theaters (So I’m pratically sure …) I’m going to test in my second
installation of BMS where the Objects folders are originals (why this ? To have two differents cockpits
and canopy reflexions and differents objects in general).I report the result tomorrow -
Hi Manos1981
You gived me an explanation for the known issue at program exit.
For the frequencies I made what Nikos prescripted and it’s ok now!
As Cobra00 said “Turn Set by HQ on”,I turned on,but at Limnos I’ve no missions start and a similar
problem at Nea Anchialos.I’m sure that it’s not the Objects folder from Tom Catz since I’ve no problems
like those at others base or others theaters (So I’m pratically sure …) I’m going to test in my second
installation of BMS where the Objects folders are originals (why this ? To have two differents cockpits
and canopy reflexions and differents objects in general).I report the result tomorrowI would love to have this prescription also Anyway i will try again with the “set by HQ on” to see… Untill now both new and the old campaign i started with this option off and the sliders moved down almost at the middle… I think it needs thiss set to OFF in the first screen that you get. I didnt do the whole “dance” that cobra says. Only in the first screen… Will test anyway and post soon
-
As you can see its ok! Therefore i would say again i havent installed th whole folder yet (modded) its the original Aegean (with 1.2 Hotfix) the only modification it haves is the JanHas 3d models! (Jan they rock!!! Bravo for your work) By the way i have 2 different installations of Aegean and 3 of Balkans! lol all for modifications i like to do and experiment with the objects and always in my external drive a Backup of the original data folder before the mods also if you see in my attachments the HQ option is on… and still produces missions
-
As you can see its ok! Therefore i would say again i havent installed th whole folder yet (modded) its the original Aegean (with 1.2 Hotfix) the only modification it haves is the JanHas 3d models! (Jan they rock!!! Bravo for your work) By the way i have 2 different installations of Aegean and 3 of Balkans! lol all for modifications i like to do and experiment with the objects and always in my external drive a Backup of the original data folder before the mods also if you see in my attachments the HQ option is on… and still produces missions
Ok Manos1981,I’ve the sames screens than yours! But when i start effectively a mission from Limnos
i don’t drop into the cockpit and after +/- 30sec appear the debriefing sceen where all pilots are “Average”
and “Non ordonance” and up of the screen we can read: “Mission still in progress”
I tried 5 or 6 missions from Limnos with the same issue.Note: in my last post i said that the same thing occured at Nea Anchialos but i’m wrong (My memory is not so good
as the computer one!) it was the wrong radio frequency but corrected now.Finally, except the problem at Limnos, all run fine! You know i experienced the same thing before with another
theater (i don’t remember whitch one) but very very rarely. I though that perhaps it’s due to the motor of campain
when it manage the general planing of all missions at a time gived but i know nothing in the programmation of
campain .By the way I’ll take a look at Janhas 3D Models to see what it is.
Now too much words enough it’s time to fly! -
Finally i found the solution:
the 2 fields you given before Manos1981 when you said “nobody test it ?” are the origin of my problems!
I’ve introduced them into Campain\Aegean. (Replace of course)
Now i reinstalled only the folder Campain from Aegean Wars and into Campain\Aegean the field given by
Cloud9 : Save0.Tri. Always with the folder Objects from graphic improvement in Terrdata of Tom Catz
(though he made it for Korea!) and now all run fine even at Limnos. What I don’t understand is why Cloud9 said “It’s not perfect but it’s stop the CTD”