Falcon MFD Software for android tablets
-
Does anyone have any info on the missing keybindings I pointed out earlier and the fact that the MFDs get out of sync easily if you mix mouse / keyboard / tablet inputs?
All the best,
Uwe
-
Dear all:
I have a long time question.I use two tablet and one phone.It can lag about 1~2 secend.Maybe ten minute or five
minute ….not always.do u anyone have this problem.My RAM have 16G,CPU i5 34xx.GPU Ram 2G.I use shoot 1.6.4
TrickIR 5.OS win 7 64.I find the problem that It spent much time.do u have any tools or method to check.If i don’t
use tablet.It is seem to ok.Give me some suggest to me,please.Thank u so much.
If you are using two tablets and getting a lag (1 or 2 seconds), try for troubleshooting purposes, using only one tablet. Do you still get a lag using one tablet only? Also, with one tablet only, select only the MFD option…do not select the other options. With MFD only, do you still get a lag?
-
If you are using two tablets and getting a lag (1 or 2 seconds), try for troubleshooting purposes, using only one tablet. Do you still get a lag using one tablet only? Also, with one tablet only, select only the MFD option…do not select the other options. With MFD only, do you still get a lag?
Dear:
Thank u so much.I will try again.I remember ever this method.It is seem to improve the situation.But it can less someone.It is pitty.
-
How can I assign those unassigned keys? The list in the first post apparently does NOT cover them. No docs are available within the mfdserver directory, either.
Thanks,
Uwe
-
PS: the list is longer than this, but it would not fit my screen
PPS: Even the incr / decr hsd OSB keys result in an error message which probably isn’t exactly a new feature
-
i will publish new versions
but until u can click one cell in to grid
than press up/down arraw keys -
i will publish new versions
but until u can click one cell in to grid
than press up/down arraw keysThanks, I’ll give this a try!
Uwe
-
I just tried fixing the errors about simecposb_19 and _20 being undefined on both mfds by removing all references to them in the key file (starting over fresh so to speak) and I found that they were defined in my key file 4 times. Most of them worked except for the 19/20 keys which is kind of a shame because I use them quite frequently for HSD range settings for instance.
Any idea what’s wrong? The keys that the app shows as “undefined” on the tablet were definitely in the key file, but not being recognized.
All the best, Uwe
-
i will publish new versions
but until u can click one cell in to grid
than press up/down arraw keysHm, what exactly is this supposed to do? On my end it only activates the cell above the currently active one.
Thanks, Uwe
-
i changed some codes to increase speed
my friends are testing latest debug apk for us.
Thanks to all to help meGood Fly
-
i changed some codes to increase speed
my friends are testing latest debug apk for us.
Thanks to all to help meGood Fly
-
That is good news, Komurcu!
I wonder how those OSB keycodes ever got into my key file in the first place as they’re not listed in your first post?
Uwe
-
Please Add those into your key file (If is not inside)
SimHsiCrsDecBy1 -1 0 0XFFFFFFFF 0 0 0 1 “HSI CRS 1 deg dec”
SimHsiCrsIncBy1 -1 0 0XFFFFFFFF 0 0 0 1 “HSI CRS 1 deg inc”
SimHsiHdgDecBy1 -1 0 0XFFFFFFFF 0 0 0 1 “HSI HDG 1 deg dec”
SimHsiHdgIncBy1 -1 0 0XFFFFFFFF 0 0 0 1 “HSI HDG 1 deg inc”SimHSIIlsNav -1 0 0XFFFFFFFF 0 0 0 1 “HSI-Mode Knob ILSNAV”
SimHSIIlsTcn -1 0 0XFFFFFFFF 0 0 0 1 “HSI-Mode Knob ILSTCN”
SimHSIModeDec -1 0 0XFFFFFFFF 0 0 0 1 “HSI-Toggle Mode Knob Down”
SimHSIModeInc -1 0 0XFFFFFFFF 0 0 0 1 “HSI-Toggle Mode Knob Up”
SimHSINav -1 0 0XFFFFFFFF 0 0 0 1 “HSI-Mode Knob NAV”
SimHSITcn -1 0 0XFFFFFFFF 0 0 0 1 “HSI-Mode Knob TCN”
SimHsiCourseDec -1 0 0XFFFFFFFF 0 0 0 1 “HSI-course decrement”
SimHsiCourseInc -1 0 0XFFFFFFFF 0 0 0 1 “HSI-course increment”
SimHsiHeadingDec -1 0 0XFFFFFFFF 0 0 0 1 “HSI-heading decrement”
SimHsiHeadingInc -1 0 0XFFFFFFFF 0 0 0 1 “HSI-heading increment”SimExtFuelTrans -1 0 0XFFFFFFFF 0 0 0 1 “FUEL QTY SEL-ExtFuelTrans Switch Togg”
SimFuelTransNorm -1 0 0XFFFFFFFF 0 0 0 1 “FUEL QTY SEL-ExtFuelTrans Switch Norm”
SimFuelTransWing -1 0 0XFFFFFFFF 0 0 0 1 “FUEL QTY SEL-ExtFuelTrans Switch Wing”
SimDecFuelSwitch -1 0 0XFFFFFFFF 0 0 0 1 “FUEL QTY SEL-Knob Dec”
SimIncFuelSwitch -1 0 0XFFFFFFFF 0 0 0 1 “FUEL QTY SEL-Knob Inc”
SimFuelSwitchTest -1 0 0XFFFFFFFF 0 0 0 1 “FUEL QTY SEL-Test”
SimFuelSwitchNorm -1 0 0XFFFFFFFF 0 0 0 1 “FUEL QTY SEL-Norm”
SimFuelSwitchResv -1 0 0XFFFFFFFF 0 0 0 1 “FUEL QTY SEL-Rsvr”
SimFuelSwitchWingInt -1 0 0XFFFFFFFF 0 0 0 1 “FUEL QTY SEL-Int Wing”
SimFuelSwitchWingExt -1 0 0XFFFFFFFF 0 0 0 1 “FUEL QTY SEL-Ext Wing”
SimFuelSwitchCenterExt -1 0 0XFFFFFFFF 0 0 0 1 “FUEL QTY SEL-Ext Ctr”SimLeftAPDown -1 0 0XFFFFFFFF 0 0 0 -2 “MISC ARMAMENT-ROLL STRG SEL”
SimRightAPUp -1 0 0XFFFFFFFF 0 0 0 -2 “MISC ARMAMENT-PITCH ALT HOLD”
SimEWSModeByp -1 0 0XFFFFFFFF 0 0 0 -2 “CMDS-Mode Selector BYP”
SimEWSModeAuto -1 0 0XFFFFFFFF 0 0 0 -2 “CMDS-Mode Selector AUTO”
SimEWSProgOne -1 0 0XFFFFFFFF 0 0 0 -2 “CMDS-Program 1”
SimEWSProgTwo -1 0 0XFFFFFFFF 0 0 0 -2 “CMDS-Program 2”
SimEWSProgThree -1 0 0XFFFFFFFF 0 0 0 -2 “CMDS-Program 3”
SimEWSProgFour -1 0 0XFFFFFFFF 0 0 0 -2 “CMDS-Program 4”
SimEWSModeStby -1 0 0XFFFFFFFF 0 0 0 -2 “CMDS-Mode Selector STBY”
SimEWSModeMan -1 0 0XFFFFFFFF 0 0 0 -2 “CMDS-Mode Selector MAN”
SimEWSModeSemi -1 0 0XFFFFFFFF 0 0 0 -2 “CMDS-Mode Selector SEMI”
SimEWSModeOff -1 0 0XFFFFFFFF 0 0 0 -2 “CMDS-Mode Selector OFF”
SimAltPressInc -1 0 0XFFFFFFFF 0 0 0 -2 “Sim-Altimeter Calibration Inc”
SimAltPressDec -1 0 0XFFFFFFFF 0 0 0 -2 “Sim-Altimeter Calibration Dec”
AFBrakesToggle -1 0 0XFFFFFFFF 0 0 0 -2 “Ckpit-Air brakes toggle”SimRightAPMid -1 0 0XFFFFFFFF 0 0 0 -2 “MISC ARMAMENT-PITCH A/P OFF”
SimRightAPDown -1 0 0XFFFFFFFF 0 0 0 -2 “MISC ARMAMENT-PITCH ATT HOLD”
SimLeftAPMid -1 0 0XFFFFFFFF 0 0 0 -2 “MISC ARMAMENT-ROLL ATT HOLD”
SimHsiHdgIncBy1 -1 0 0XFFFFFFFF 0 0 0 -2 “HSI HDG Knob - Inc (1?)”
SimHsiHdgDecBy1 -1 0 0XFFFFFFFF 0 0 0 -2 “HSI HDG Knob - Dec (1?)”
SimHsiCrsIncBy1 -1 0 0XFFFFFFFF 0 0 0 -2 “HSI CRS Knob - Inc (1?)”
SimHsiCrsDecBy1 -1 0 0XFFFFFFFF 0 0 0 -2 “HSI CRS Knob - Dec (1?)”I had copy and paste this but the “not assigned keystokes” error persist.
Somebody have a .key file with all keystroke assigned for me please?
Thx in advance and thx for this marvelous app.
-
The author has said he’s going to update the list soon. I had no luck in solving my “unmapped keys” problem and even shot my keyfile in the process (my own fault though I guess ;))
Uwe
-
Thanks for the quick response, we have to wait for the new list then.
Good Winds.
-
I am having a problem with my key file. I get the following indications when I placed this in note pad:
Key filesSimFuelSwitchTest -1 0 0XFFFFFFFF 0 0 0 1 “FUEL QTY SEL-Test”
SimFuelSwitchNorm -1 0 0XFFFFFFFF 0 0 0 1 “FUEL QTY SEL-Norm”
SimFuelSwitchResv -1 0 0XFFFFFFFF 0 0 0 1 “FUEL QTY SEL-Rsvr”
SimFuelSwitchWingInt -1 0 0XFFFFFFFF 0 0 0 1 “FUEL QTY SEL-Int Wing”
SimFuelSwitchWingExt -1 0 0XFFFFFFFF 0 0 0 1 “FUEL QTY SEL-Ext Wing”
SimFuelSwitchCenterExt -1 0 0XFFFFFFFF 0 0 0 1 “FUEL QTY SEL-Ext Ctr”
SimAltPressInc -1 0 0X10 3 0 0 1 “Sim-Altimeter Calibration Inc”
SimAltPressDec -1 0 0X11 3 0 0 1 “Sim-Altimeter Calibration Dec”
SimHsiCourseDec 1001 0 0X2F 6 0 0 1 “HSI-course decrement”
SimHsiCourseInc 1001 0 0X30 6 0 0 1 “HSI-course increment”
SimHsiHeadingDec 1002 0 0X31 6 0 0 1 “HSI-heading decrement”
SimHsiHeadingInc 1002 0 0X32 6 0 0 1 “HSI-heading increment”The red files has Please add to your key file under “Explanations column (all HIS). The yellow has not assigned under the “key Name column” (all fuel). The two Alt Press were fine. What changes can be made to fix my issue? Can corrections be made to what I have to get everything to work?
-
the server crashes when entering the 3d world. Connection works fine (I can see button presses from the tablet in the server window). Is there some sort of logfile / crash dump that you’d want me to submit?
Cheers, Uwe
-
the server crashes when entering the 3d world. Connection works fine (I can see button presses from the tablet in the server window). Is there some sort of logfile / crash dump that you’d want me to submit?
Cheers, Uwe
Are you using the latest server? If so, PM me with your email address and I will look for the previous version to send to you to try.
-
I still cannot get this to work properly using the apk 2.1.1 and the server version 2.0.4. Connection seems to work fine, but whenever I press the first button on the android app, the mfd server process crashes.
All the best, Uwe
-
did you try to run server as administrator