A Guide to Morphine’s Profile for BMS 4.33 and Beyond
-
I just thought of this, it works for some people, launch the script from a desktop short cut, set the target as “C:\Program Files (x86)\Thrustmaster\TARGET\x64\TARGETGUI.exe” -r “C:\Users\XXX\Downloads\Warthog_BMS_Full_4.tmc” Use the quotes and set file location to where ever you are storing the profile.
-
Nope, Same Issue. Still fails to produce Thrustmaster Combined when the Script it Launched…
Flow, you are Correct, it IS a Combined Driver Issue. As in, When the script launches it’s not switching over to that and all attempts to fix it fail. I’ve tried on both USB 2.0 and USB 3.0
Unless there is a Specific Driver I’m apparently missing to Download, This issue probably will not be fixed. -
What version of windows are you running ?
-
Windows 8.1 64-bit.
-
Hmm… That is strange.
If you do a simple profile without anything in it using TM TARGET GUI, is it working or not ? Or does it do the same error ? -
Still shows up as Thrustmaster Virtual Game Controller (root). And it’s also Affecting the Rudder when I add it to the Profile As well. More Searching, More Solutions that Don’t Work. At this point I’m going to hope one day it works, And Figure out my Jury Rig from here. Thanks for the Help at least.
As a Last Desperate Gasp, I’ve sent the Issue to Thrustmaster Support, And Leave you with my Window’s Troubling Shooting Screens for the Stick and throttle to see if it will help.
-
Still shows up as Thrustmaster Virtual Game Controller (root). And it’s also Affecting the Rudder when I add it to the Profile As well. More Searching, More Solutions that Don’t Work. At this point I’m going to hope one day it works, And Figure out my Jury Rig from here. Thanks for the Help at least.
As a Last Desperate Gasp, I’ve sent the Issue to Thrustmaster Support, And Leave you with my Window’s Troubling Shooting Screens for the Stick and throttle to see if it will help.
Not sure if you tried this registry trick, but it may be worth a shot.
https://www.reddit.com/r/hotas/comments/5it8q2/solution_to_thrustmaster_target_software/Also if you want to give up on target, Joystick Gremlin maybe a viable alternative.
-
Yep, I am out of options.
I would try to remove TARGET and reinstall it with windows in a mode that does not want the drivers to be signed :after that I have no more ideas.
-
Hi Gastone,
I face some problems when installing Morphine’s profile:
1. When running Warthog_BMS_Full_5.tmc in TARGET, it doesn’t stop running (see pic).
2. BMS setup all required settings done. Throttle looks okay, but stick seems not recognized, stick doesn’t work.Your guidance would be appreciated.
Thx Vordy
-
@Vordy87th:
Hi Gastone,
I face some problems when installing Morphine’s profile:
1. When running Warthog_BMS_Full_5.tmc in TARGET, it doesn’t stop running (see pic).
2. BMS setup all required settings done. Throttle looks okay, but stick seems not recognized, stick doesn’t work.Your guidance would be appreciated.
Thx Vordy
Looks like the script is running fine, you just leave it running in the background.
If your button numbers seem to be off, make sure that the x:\Falcon BMS 4.33 U1\User\Config\DeviceSorting.txt has “Thrustmaster Combined” as the first line.
-
Looks like the script is running fine, you just leave it running in the background.
If your button numbers seem to be off, make sure that the x:\Falcon BMS 4.33 U1\User\Config\DeviceSorting.txt has “Thrustmaster Combined” as the first line.
Thx for your reaction TxMtb (Texan ??)
1. TARGET has to run in the background intentionally ??
2. Yes did that, ‘Thrustmaster Combined’ is t(already was) he first line in DeviceSorting.txtSo, it has to be something else, any (other) clue ??
Many thx, Vordy
-
@Vordy87th:
Thx for your reaction TxMtb (Texan ??)
1. TARGET has to run in the background intentionally ??
2. Yes did that, ‘Thrustmaster Combined’ is t(already was) he first line in DeviceSorting.txtSo, it has to be something else, any (other) clue ??
Many thx, Vordy
Yep it has to run in the background all the time.
There is an error in the script I overlooked the first time, &PID_0403 not found.
Might try re-installing the drivers for the stick and throttle.
-
This post is deleted! -
Yep it has to run in the background all the time.
There is an error in the script I overlooked the first time, &PID_0403 not found.
Might try re-installing the drivers for the stick and throttle.
Re-installed drivers, still this script error message: USB HID device with hardware id “VID_044F&PID_0403” cannot be found
-
That PID is for F/A-18 grip that has not yet been released. So it isn’t causing any issues, I run with the same warning and all is good for me. Have you loaded the .key file from dropbox in BMS? You need that to make it work too. I’ve updated to the latest version of target and the profile is working fine for me. If that doesn’t work then look at the last few pages of this thread. Many people have issues with target, the most frequent is either due to the teamspeak bug or driver install issues. The driver install issue are the most difficult to fix, but it doesn’t look like you have those. So try following all the steps on the first post, if that doesnt work, start the target script, get screen shots of Joy.cpl, the setup menu in BMS and Advanced-> Flight Controls menu too.
-
Ok so I looked at your script startup page again. Whats going is that target is not seeing your throttle. It’s probably related to bad install / windows poor handling of USB devices as of late. You are probably going to have to delete the registry entry for the device, reboot and plug it back in. Then run the script. If that doesn’t work; delete the drivers, then the registry entry, unplug everything, reinstall the drivers, then plug in the devices only when prompted by installer. Once that’s done run the script.
The registry entry for the device is located at:
Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\VID_044F&PID_0404
You can copy and paste that into regedit, and it will take you to folder, unplug the throttle and right click and delete. Leave it unplugged and reboot. -
Thx Gastone, appreciate your help.
The throttle looks good, eg. radar microstick and speedbrakes are working fine. TARGET doesn’t see the joystick. You’re probably right that it might be a combination of W10 bad handling of USB devices/ports and registry problems. I will delete the drivers, clean the registry and follow your steps. I also will give feedback of the results.
Cheers Vordy
-
With target running, check the status of the hotas in the windows joystick control panel. Click the windows button type joy.cpl either take a screen shot or list the devices there. The fact that throttle is working maybe just a coincidence. I can tell something is up because in the startup the line USB HID Device “”() selected indicates that throttle has not been properly enumartion by target. However if you wish to delete the registry entry for the Joystick too the registry entry is the nearly the same except the PID is 402
-
What to do now ???
-
Check the properties and see if it looks like this:
The trigger should be button 1 for 1st detent and 6 for 2nd detent.