Radar Pitches Left???
-
Odds are, there is a bias on your cursor axis.
-
Have you set a dead zone ?
Strange if it returns itself !
-
Have you set a dead zone ?
Strange if it returns itself !
I looked around, I cannot find a place where you can do that, how is that done?
-
Odds are, there is a bias on your cursor axis.
well, if there is a way to check that I would appreciate if you could let me know.
-
well, if there is a way to check that I would appreciate if you could let me know.
2 cases :
- either you use a direct axis for cursor. In that case, what you describe is most likely your physical device having a bias.
To check for that, ook on the axis setup window in BMS (I cant remember the exact name, but the BMS manual will tell you), and check Cursor X. If it is off center when you don’t have any input on it, it has a bias. - or you usually use the keyboard for cursor. In that case, what you describe could be that you accidentally mapped the CursorX axis on a device, and that axis is to the maximum left. So use again the axis window, and check if the CursorX axis is not mapped to Keyboard.
- either you use a direct axis for cursor. In that case, what you describe is most likely your physical device having a bias.
-
Have you set a dead zone ?
Strange if it returns itself !
Not at all. If you bump the cursor to the edge, it gets back to centre ( with a reduced azimuth.). What he describes is the same as if you kept CursorX all the way to the left, or, if using keyboard for cursor, the CursorLeft key was pressed continuously.
-
I reinstalled the game, now once the cursor is moved, no matter which direction, it continues moving in that direction up, dwn, rt, lft,……all the way to the edge and repeats doing that until it is moved to another direction and then it goes in that direction and does the same.
-
Sounds like a script that keeps the key pressed.
How is your axis controlled ? Through a joystick script or directly in BMS as an axis ? -
That type of behavior also occurs with the warthog’s target program when shifted keys are programmed for any press and hold buttons.
-
I reinstalled the game, now once the cursor is moved, no matter which direction, it continues moving in that direction up, dwn, rt, lft,……all the way to the edge and repeats doing that until it is moved to another direction and then it goes in that direction and does the same.
If you look in the setup page , Controllers, Advanced, Avionics Control, now look at the Cursor X & Y you will see Dead zones . Set to Large.
Not at all. If you bump the cursor to the edge, it gets back to centre ( with a reduced azimuth.). What he describes is the same as if you kept CursorX all the way to the left, or, if using keyboard for cursor, the CursorLeft key was pressed continuously.
If it has found the ability to “Reset” itself, the term originally used, then it is very unusual. I know exactly the usual Warthog mini joystick issue. I own one.