TUSBA calibration
-
@Alfred Can you hook throttle up to your Cougar stick and test it? It would then tell you if it was switch or TUSBA issue. Your cursors looks weird too, They should be more centered.
-
Did you use Pairing optión?
-
@Icarus said in TUSBA calibration:
@Alfred Can you hook throttle up to your Cougar stick and test it? It would then tell you if it was switch or TUSBA issue. Your cursors looks weird too, They should be more centered.
the cursor is fixable, not a concern. But the antenna has been like this in the last few days. I have the FSSB so the main cougar base is gone.
-
-
I reversed the role of antenna and range so now I have good antenna but not good range knob. I guess range knob is important only for TGP
-
“Pairing
The process of adjust and calibration of throttle with TUSBA starts with the Pairing action. With this action TUSBA adjusts individually the amplifiers of each analog axis to obtain the maximum span and so to make better use of 12 bits analog converter. For this, TUSBA needs to know the maximum and minimum values of the analog measure of each axis, so as we will see after, we will need to move the axes to the extreme positions to achieve these values.”When I have a problem always made Pairing and calibration.
-
@Alfred said in TUSBA calibration:
nused, also, the radar range have the same problem. The range seems to work properly
Hi Alfred,
I had some issues with my TUSBA also. Don’t trust the image of the throttle. That rarely gives a good indication of the full range.
A better option is to set the Axes Measure from Absolute to Percentage.
Than move your throttle from min to max and see if its correctly reflected on the throttle axis.
Due to a bug in Windows 10 you the calibration is messed sometimes. The guys from Realsimulator advised me to go to Control Panel and press View devices and printers.
From there you right click the TUSBA and click Remove device. Than unplug, wait a couple of seconds and plug it back in. That fixes it for me.
But it’s really irritating to do this almost after each reboot. Another suggestion from the guys was to unplug all devices and first plug the TUSBA in.
Maybe that helps?
-
Yes, sorry…I have sometimes the problem throttle doesn´t have all the range, little range at least.
Then I made Bertuz solution, remove device, plug in, pair and calibrate
-
oh I know now that the throttle is no issue, it’s the antenna that just recently started to act like it is ignoring most of the motion.
-
@Skorp said in TUSBA calibration:
“Pairing
The process of adjust and calibration of throttle with TUSBA starts with the Pairing action. With this action TUSBA adjusts individually the amplifiers of each analog axis to obtain the maximum span and so to make better use of 12 bits analog converter. For this, TUSBA needs to know the maximum and minimum values of the analog measure of each axis, so as we will see after, we will need to move the axes to the extreme positions to achieve these values.”When I have a problem always made Pairing and calibration.
you mean the square that says “pairing…” on the TUSBA tab in RS_HID__DEV _TOOL? yeah I did that already more than once