TGP and MAV WPN screens fps low
-
@kouzi Something must be off as I-Hawk says. I have a much older computer i73930k @4.0 ghz with 2080ti and I get usually 100+ fps and never drop below 60fps ever with all stuff turned on max even grass and both Tgp and wpn page use. 2650x1600 res. My cpu bottlenecks the 2080ti by about 15%.
-
I see,hope one day all effect turn on and use TGP、MAV WPN page screens have smooth frame.
-
Something does seem off. On my i7 4770K @ 4.3GHz GTX1060 3GB on 1080p shadow mapping off, this is campaign tiger spirit first mission that came up…
Airborne TGP off 123 FPS
Airborne TGP on 97 FPS
i5 10400F RTX 3060 should be a lot faster… Any stuff running in background? Got latest GPU drivers?
-
@kouzi thermal throttling problem? how are your temperatures?
-
@kouzi If something is off it could also be display cable - are you on DisplayPort or HDMI with a decent cable ?
When I first got a DP monitor, my old cable had me throttled so that I could not run at 144Hz. Had to get a better one which immediately fixed that issue
-
even if the fps decreases, the only question to ask is: does it bother you during the flight?
-
-
@Hubert3000
yes, something wrong…
turn off shadow effect can increase fps,but I never get 100 fps above
in BMS settings graphics item.
how do you set anti-aliasing and object detail value?
I know the larger the value cause fps low.@airtex2019
no,everything nornml
I think my problem is similar to DISCODANhttps://forum.falcon-bms.com/topic/23128/shadows/9?_=1693818408255
this post
“So I installed Balkans theatre and even with Janhas mods my FPS is in the 60s on the ground.
Seems to be a KTO issue. More buildings?”I installed janhas GSE mod,I will remove it and test fps.
if still have problems,that’s ok.
try not to use MAV hand-off mode,TGP normal use.
turn off some shaders effect,then happy fly.@jayb
hi
very good suggestion
HDMI cable no problems
maybe one day buy new one test it. -
AA and other settings have only small effects here, the main one for BMS is shadow mapping. I have AA on 4x in game as I like that setting but 8x is no problem. Object detail is on max.
Tested with shadow mapping on, 1440p res (2560x1440) and both TGP and Mav display on at same time in campaign 66 FPS.
Are you using the primary PCIe x16 slot for GPU? I remember someone was using a x4 slot and it was slowing it down. Make sure you use the HDMI or DP cable that came with the monitor as below 4K HDMI cable won’t work right. Try DP displayport cable.
-
hi
thank you for your reply.
shadow mapping and water environment mapping is fps killer.
I using the primary PCIe x16 slot for GPU
hardware no problems.
turn off shadow or water environment effect,hope TGP fps don’t below 40fps and MAV hand -off mode fps don’t below 30fps,reluctantly accepted.
leave it at that.
maybe reinstall BMS 4.37 everying will be fine.all the best
kouzi
-
@kouzi CPU and GPU temperatures?