Mud's Profile
-
New version has been uploaded. I did bite off a bit more than I could chew today though. The autopilot code has not been done yet, nor have I been able to test the new script properly.
I’ll upload a full and tested version later this week.Feel free to report any problems you may encounter so far.
-
This post is deleted! -
Having the same issues as Qmaster, even with the updated files.
-
Throttle works grate but joy does not work at all except axis in game. Same as Qmaster and lot of other guys as you said Mud.
-
Everything works fine for me, except the DMS and TMS. Those are the only missing commands from my setup.
-
I’ll continue working on the script once I’m home from work to add the autopilot and I’ll also have a look into the DX functions for the stick.
-
This post is deleted! -
Updated to version 3.0
Stick seems to be functioning and autopilot as well.
Like yesterday though, I haven’t had time to properly test so I expect there to still be little things here or there. I’d normally not release it before having tested / flown it for a week or two, but I feel like I just can’t let people wait that long.
fingers crossed
-
That did the trick on my end. Appreciate it!
-
It not working for me. All functions on the stick don’t work at all.
-
The download link seems to be dead for me.
-
Was able to download the files, but now it seems like it isn’t even recognizing the stick. When I get it to set the axis, when I go to fly, there’s nothing. And the only inputs that register on it is to look closer.
-
Clawz and Knubinator: did you load my keyfile in BMS as well?
-
Had issues with the new file all axis’s were bound correctly only joystick button that worked was look closer, Throttle buttons a few didn’t work airbrake, china hat, slew, coolie and yes loaded correctly with new keyfile and script
-
And you load and run the script from the script editor and not the GUI from Target?
Apart from that I don’t know what to say. If it’s working for me, it should for everybody else as well.
-
Had issues with the new file all axis’s were bound correctly only joystick button that worked was look closer, Throttle buttons a few didn’t work airbrake, china hat, slew, coolie and yes loaded correctly with new keyfile and script
And I have exactly the same thing.
@Mud:
And you load and run the script from the script editor and not the GUI from Target?
Apart from that I don’t know what to say. If it’s working for me, it should for everybody else as well.
If you don’t have an idea to solve this problem then maybe someone else have. Anybody ?? Plz help is needed !
-
Artur, could you take me through what you do step by step? Perhaps I’ll spot something then you may be missing.
-
@Mud:
Artur, could you take me through what you do step by step? Perhaps I’ll spot something then you may be missing.
Yes sure.
1. Of course Im downloading version 3.0
2. BMS 4.33 - Mud.key goes to D:\Falcon BMS 4.33\User\Config
3. Setting up axismapping and joystick.cal to read only
4. Starting TARGET Script and opening BMS 4.33 - Mud.tmcI don’t need to type off line ***Launch BMS… *** because as you can see its the same as yours but Im typing out MFDs and it looks like this:
//*************************
//*** TM Cougar MFD’s ***
//*************************//ActKey(PULSE+KEYON+LED(&LMFD, LED_INTENSITY, 0)); //set left MFD backlight power to middle
//ActKey(PULSE+KEYON+LED(&RMFD, LED_INTENSITY, 0)); //set right MFD backlight power to middle// Left MFD
//MapKey(&LMFD, OSB01, CHAIN(LOCK+PULSE+L_CTL+L_ALT+USB[0x1E],LOCK)); // ** USB 1 **
//MapKey(&LMFD, OSB02, CHAIN(LOCK+PULSE+L_CTL+L_ALT+USB[0x1F],LOCK)); // ** USB 2 **
//MapKey(&LMFD, OSB03, CHAIN(LOCK+PULSE+L_CTL+L_ALT+USB[0x20],LOCK)); // ** USB 3 **
//MapKey(&LMFD, OSB04, CHAIN(LOCK+PULSE+L_CTL+L_ALT+USB[0x21],LOCK)); // ** USB 4 **
//MapKey(&LMFD, OSB05, CHAIN(LOCK+PULSE+L_CTL+L_ALT+USB[0x22],LOCK)); // ** USB 5 **
//MapKey(&LMFD, OSB06, CHAIN(LOCK+PULSE+L_CTL+L_ALT+USB[0x23],LOCK)); // ** USB 6 **
//MapKey(&LMFD, OSB07, CHAIN(LOCK+PULSE+L_CTL+L_ALT+USB[0x24],LOCK)); // ** USB 7 **
//MapKey(&LMFD, OSB08, CHAIN(LOCK+PULSE+L_CTL+L_ALT+USB[0x25],LOCK)); // ** USB 8 **
//MapKey(&LMFD, OSB09, CHAIN(LOCK+PULSE+L_CTL+L_ALT+USB[0x26],LOCK)); // ** USB 9 **
//MapKey(&LMFD, OSB10, CHAIN(LOCK+PULSE+L_CTL+L_ALT+USB[0x27],LOCK)); // ** USB 0 **
//MapKey(&LMFD, OSB11, CHAIN(LOCK+PULSE+L_CTL+L_ALT+KP1,LOCK));
//MapKey(&LMFD, OSB12, CHAIN(LOCK+PULSE+L_CTL+L_ALT+KP2,LOCK));
//MapKey(&LMFD, OSB13, CHAIN(LOCK+PULSE+L_CTL+L_ALT+KP3,LOCK));
//MapKey(&LMFD, OSB14, CHAIN(LOCK+PULSE+L_CTL+L_ALT+KP4,LOCK));
//MapKey(&LMFD, OSB15, CHAIN(LOCK+PULSE+L_CTL+L_ALT+KP5,LOCK));
//MapKey(&LMFD, OSB16, CHAIN(LOCK+PULSE+L_CTL+L_ALT+KP6,LOCK));
//MapKey(&LMFD, OSB17, CHAIN(LOCK+PULSE+L_CTL+L_ALT+KP7,LOCK));
//MapKey(&LMFD, OSB18, CHAIN(LOCK+PULSE+L_CTL+L_ALT+KP8,LOCK));
//MapKey(&LMFD, OSB19, CHAIN(LOCK+PULSE+L_CTL+L_ALT+KP9,LOCK));
//MapKey(&LMFD, OSB20, CHAIN(LOCK+PULSE+L_CTL+L_ALT+KP0,LOCK));
// GAIN = HUD Brightness
//MapKey(&LMFD, GAINU, CHAIN(LOCK+PULSE+L_CTL+L_SHIFT+USB[0x57],LOCK)); // ** USB NUMPAD + **
//MapKey(&LMFD, GAIND, CHAIN(LOCK+PULSE+L_CTL+L_SHIFT+USB[0x56],LOCK)); // ** USB NUMPAD - **
// BRIT = Left MFD Brightness
//MapKey(&LMFD, BRTU, CHAIN(LOCK+PULSE+L_CTL+L_ALT+USB[0x2E],LOCK)); // ** USB = **
//MapKey(&LMFD, BRTD, CHAIN(LOCK+PULSE+L_CTL+L_ALT+USB[0x2D],LOCK)); // ** USB - **
// SYM = AA / AG
//MapKey(&LMFD, SYMU, CHAIN(LOCK+PULSE+USB[0x3E],LOCK)); // ** USB F5 **
//MapKey(&LMFD, SYMD, CHAIN(LOCK+PULSE+USB[0x3F],LOCK)); // ** USB F6 **
// CON = Altimeter adjust
//MapKey(&RMFD, CONU, REXEC(7,90,“ActKey(PULSE+KEYON+L_SHIFT+L_ALT+USB[0x34]);”)); // ** USB ’ **
//MapKey(&RMFD, COND, REXEC(8,90,“ActKey(PULSE+KEYON+L_SHIFT+L_ALT+USB[0x33]);”)); // ** USB ; **// Right MFD
//MapKey(&RMFD, OSB01, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+USB[0x1E],LOCK)); // ** USB 1 **
//MapKey(&RMFD, OSB02, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+USB[0x1F],LOCK)); // ** USB 2 **
//MapKey(&RMFD, OSB03, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+USB[0x20],LOCK)); // ** USB 3 **
//MapKey(&RMFD, OSB04, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+USB[0x21],LOCK)); // ** USB 4 **
//MapKey(&RMFD, OSB05, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+USB[0x22],LOCK)); // ** USB 5 **
//MapKey(&RMFD, OSB06, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+USB[0x23],LOCK)); // ** USB 6 **
//MapKey(&RMFD, OSB07, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+USB[0x24],LOCK)); // ** USB 7 **
//MapKey(&RMFD, OSB08, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+USB[0x25],LOCK)); // ** USB 8 **
//MapKey(&RMFD, OSB09, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+USB[0x26],LOCK)); // ** USB 9 **
//MapKey(&RMFD, OSB10, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+USB[0x27],LOCK)); // ** USB 0 **
//MapKey(&RMFD, OSB11, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+KP1,LOCK));
//MapKey(&RMFD, OSB12, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+KP2,LOCK));
//MapKey(&RMFD, OSB13, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+KP3,LOCK));
//MapKey(&RMFD, OSB14, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+KP4,LOCK));
//MapKey(&RMFD, OSB15, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+KP5,LOCK));
//MapKey(&RMFD, OSB16, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+KP6,LOCK));
//MapKey(&RMFD, OSB17, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+KP7,LOCK));
//MapKey(&RMFD, OSB18, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+KP8,LOCK));
//MapKey(&RMFD, OSB19, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+KP9,LOCK));
//MapKey(&RMFD, OSB20, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+KP0,LOCK));
// GAIN = HUD Brightness
//MapKey(&RMFD, GAINU, CHAIN(LOCK+PULSE+L_CTL+L_SHIFT+USB[0x57],LOCK)); // ** USB NUMPAD + **
//MapKey(&RMFD, GAIND, CHAIN(LOCK+PULSE+L_CTL+L_SHIFT+USB[0x56],LOCK)); // ** USB NUMPAD - **
// BRIT = Right MFD Brightness
//MapKey(&RMFD, BRTU, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+USB[0x2E],LOCK)); // ** USB = **
//MapKey(&RMFD, BRTD, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+USB[0x2D],LOCK)); // ** USB - **
// SYM = AA / AG
//MapKey(&RMFD, SYMU, CHAIN(LOCK+PULSE+USB[0x3E],LOCK)); // ** USB F5 **
//MapKey(&RMFD, SYMD, CHAIN(LOCK+PULSE+USB[0x3F],LOCK)); // ** USB F6 **
// CON = Altimeter adjust
//MapKey(&RMFD, CONU, REXEC(7,90,“ActKey(PULSE+KEYON+L_SHIFT+L_ALT+USB[0x34]);”)); // ** USB ’ **
//MapKey(&RMFD, COND, REXEC(8,90,“ActKey(PULSE+KEYON+L_SHIFT+L_ALT+USB[0x33]);”)); // ** USB ; **So I save changes and launching script.
5. Launcher.exe is starting automatically
6. In game I have my profile (tried with new profiles as well)
Im going to settings loading yours setup and apply it, then setting up axis and you know the restHad issues with the new file all axis’s were bound correctly only joystick button that worked was look closer, Throttle buttons a few didn’t work airbrake, china hat, slew, coolie and yes loaded correctly with new keyfile and script
TARGET version 1.0.11.304
Firmware 11/23
BMS 4.33I have TM Warthog, Saitek Pro Rudder Pedals and TrackIR.
-
Mud, are you using the new key assignments in the DX file? or the previous ones from 4.32? for example, view frame rate is not CTRL Z R anymore.
how do you have it in your profile? cheers
-
Yes sure.
3. Setting up axismapping and joystick.cal to read only
6. In game I have my profile (tried with new profiles as well)3. You can skip this step and leave those files normal now. Seems it is a Windows problem, not a BMS one.
6. By Profile you mean you loaded the keyfile BMS 4.33 - Mud.key ?