I have been hamering on some models including the F-35A (pit is build and mapped) and the HMIT helmet for the next F-16AM BAF. Currently I’m checking all LV5’s and updating where needed so the fps hit will be less when models are loaded. The intake fix is planned after a new BMS version is released.

@drtbkj

Still a LOT of work has to be done… Figuring out how all parts look and work takes time… a LOT of time… Nowhere near ready for release but Rome wasn’t build in one day either.

I have updated/checked the models last year. Last thing I need to do is check the fm/afm files and upload the new versions.
Last few months were used to work on the F-35A model. Currently I’m working on the front gear.

At this moment in time no models have been converted. Family and work takes most of the time. I’ll see if I can find some time to convert some of them. I’m not out of the Falcon business…

The first few packages are back online. I had to check/tweak a few models in order to make it work with 4.37.

ALW
N-GSE
Trees
LV7 F-16CM-42
Pod&Pylons
F-4DSK
AC-130U
C-130H
RNLAF shelter

Grandpa passed away last Wednesday so the time I had reserved for this week was gone. F-16AM RDAF is almost ready. F-16AM RNLAF is by request the one after that. Then the popular models like CM-40/50.

This will be the one and only “JanHas Models & Skins” Thread.

These models are compatible with BMS 4.36. I need to fix some issues, when a model is ready a download link will appear on my website.
JanHas.net will become the only source for my models and skins.

@Alfred said in JanHas Models & Skin Thread -Compatible with 4.36:

@JanHas Hello JanHas, just wondering if you did some work on modifying the air ducts for the new release of BMS.

The intakes tweaks are planned for the LV7 release (or sooner). Last few months were spend hammering on a high detail F-35A model.

@Migbuster

Yes, my CM-42 already has the AIFF. The Stingers were one of the first to get those (and HTS).

My guess is what the USAF wanting a high/low fleet the F-16’s all will get the new center console and APG-83.

@kouzi said in JanHas Models & Skin Thread -Compatible with 4.36:

hi @JanHas
i use reshade adjust color

I checked out the Reshade program and it clearly saturates the colors a lot more compared to the vanilla colors. You need to check if you can tone the saturation down for BMS. I hope this helps.

Send me an email so I can send you a less saturated AB texture.

@Geraki:

The problem with dat file for RPM still occurred. The needle going suddenly to 0 after Full AB is selected

In addition the flexibility of the wing tips is better to be implemented above 1.5 +- G’s right now with 0.5-0.8 the wing tips moves. (with or without load)

I have corrected a small error in the fm.dat to fix the rpm issue. The data edit was still there when I was experimenting with the P&W petals movement. It are just a few digits, quick to miss… I will add the fixed fm file in a separate zip file, at the bottom of the main page, today. For those of you downloaded the v2 today the problem should be fixed. Anyone who downloaded it after that is OK. The time stamp for the fixed fm.dat file is October 27th 2016 00:31.

@ Geraki. I did not edit the value at what G value the wing flex begins. It could benefit from better movement code. At the moment the wing flex is single speed hard up/down. It could look better if it moved as smoothly like the horizontal stabilizers. But that is out of my hands…

The first few packages are back online. I had to check/tweak a few models in order to make it work with 4.37.

ALW
N-GSE
Trees
LV7 F-16CM-42
Pod&Pylons
F-4DSK
AC-130U
C-130H
RNLAF shelter

Grandpa passed away last Wednesday so the time I had reserved for this week was gone. F-16AM RDAF is almost ready. F-16AM RNLAF is by request the one after that. Then the popular models like CM-40/50.

At this moment in time no models have been converted. Family and work takes most of the time. I’ll see if I can find some time to convert some of them. I’m not out of the Falcon business…

@drtbkj

Still a LOT of work has to be done… Figuring out how all parts look and work takes time… a LOT of time… Nowhere near ready for release but Rome wasn’t build in one day either.

@cougar56th said in JanHas Models & Skin Thread -Compatible with 4.36:

@dema I guess the only way to accurately depict that would be to have 2 versions of the Block 40 and Block 42…one with AIFF and one without AIFF

Can be done with type 21 poly’s…? Have the poly’s there and let a texture decide if the AIFF is shown. If not a transparent section on that texture. My only worry is the shading… will a invisible poly create a shade…

@Migbuster

Yes, my CM-42 already has the AIFF. The Stingers were one of the first to get those (and HTS).

My guess is what the USAF wanting a high/low fleet the F-16’s all will get the new center console and APG-83.

@jack333

Check if the model has been replaced because from what I can make of the screenshot it is still the original BMS model. E-mail me if you still have the problem.

@Alfred said in JanHas Models & Skin Thread -Compatible with 4.36:

@JanHas Hello JanHas, just wondering if you did some work on modifying the air ducts for the new release of BMS.

The intakes tweaks are planned for the LV7 release (or sooner). Last few months were spend hammering on a high detail F-35A model.

@kouzi said in JanHas Models & Skin Thread -Compatible with 4.36:

hi @JanHas
i use reshade adjust color

I checked out the Reshade program and it clearly saturates the colors a lot more compared to the vanilla colors. You need to check if you can tone the saturation down for BMS. I hope this helps.

Send me an email so I can send you a less saturated AB texture.

@kouzi

Hi,

It looks like your color saturation is much higher than mine. The skin or AB model haven’t changed.
Anyone else having this issue? Let me know!

I have updated/checked the models last year. Last thing I need to do is check the fm/afm files and upload the new versions.
Last few months were used to work on the F-35A model. Currently I’m working on the front gear.