I tried an other way to obtain the labels for my Orion TQS : making labels I wanted with Photoshop then printing on Canon Restickable Photo Paper, and last sticking them at right place on the TQS. As you can see the result is not bad.
Posts made by Marge
-
RE: Winwing Orion TQS labels
-
RE: Trigger detents 1 and 2
Hello @drtbkj , I reconfigured the two triggers on the Gladiator and it’s working now, pressing the first trigger start the laser with L flashing, but I must keep the trigger pressed to make a continuous lase (buddy lasing).
The mysteries of computers ! -
RE: Trigger detents 1 and 2
Yes I did all these checks many times and the L appears on the TGP and the HUD, but never flashing. I tried with GBU 12 (with15 seconds lase), altitude 15000ft and same punition, the bomb drops but no flashing L so any splash on the target, in spite of maintaining a no masking flight.
Some suggestion welcome ! -
RE: Winwing Orion TQS labels
Very nice suggestion! and thank you so much for this solution ! I’ll take it !!
-
RE: Trigger detents 1 and 2
Another problem with Triggers !
I configured my Triggers with Alternate Launcher as you explained and I succeeded (you can see the result in the screenshot) but I can’t activate laser for exemple when using Mavericks L, using Trigger 1 or Trigger 2. The L is never flashing despite multiple trys!!!
Can you give me some help to resolve this ?
-
RE: Bug with Orion TQS
@Tiger-0 Yes you are right, I had forgotten to program the Dogfight pages as I d’nt use Dogfight actually because I’m in a strike group.
-
Winwing Orion TQS labels
Hello, I fly only with BMS F16 and using Winwing Orion TQS. I’m wondering if I can find or create some nice alternate labels to put on the actual labels concerning F18 or F15, as Hook, Launch Bar, Flaps and Wing Fold. ?
-
RE: Bug with Orion TQS
Good catch @airtex2019, I was so silly ! The dogfight button (I do’nt use it actually as I’m just starting with this throttle) was in MRM OVRD mode… Simple but I had not checked this function.
Thanks to you and @tteddy623 for your help -
Bug with Orion TQS
I’ve a problem with my new Orion TQS.
When I start in Ramp, everything works fine, but when starting Taxi or Runway for a TE or Multiplayer, I’m in the cockpit with the 2 MFD in Blank situation, in AA mode, and the two buttons AA and AG not operating, as the AA and AG buttons of my Orion TQS.
Very bad things and I can’t manage this problem, only appearing with Orion active.
Hoping someone can tell me how to resolve ! Thanks -
RE: Trigger detents 1 and 2
Thanks to you, I succeeded with “Do the second detend first” and it works fine !
Very simple but when you d’nt know !! -
Trigger detents 1 and 2
I’m using Alternate Launcher in DX mode and I d’nt succed programming second detent correctly : each time I try it takes first and second detent, (as you can see on the picture).
So I can’t program first trigger only. -
RE: Logitech x52 pro programming with Joy ToKey for falcon-bms
Hello Louis, I had an X52 and when he died I baught an X52 pro. It’s a good hotas but now after some years of use, the stick is very imprecise, specially for the pitch, so refueling is very difficult.
-
RE: Cursor radar
I think I got a solution to this problem : in the keyfile (I’m using the FULL one) you can see that TQS Radar cursor use Shift plus Arrows.
Perhaps Shift command is the problem, so I made modifications of this Keyfile, suppressing Shift and using only the Up, Down, Left and Right Arrows, so it’s working better. It’s not perfect but temporarily acceptable, waiting for a correction in next Update. -
RE: Cursor radar
Same problem for me with the cursor of my X52 Pro, having erratics movements.
In 4.36 it was working fine with axis three bands.
Hoping it will be corrected soon ! -
RE: AXIS SETTINGS
Thanks a lot Oakdesign and now I understand why I din’t saw those values in my .cfg file, I must add them manually !
I’ll do that and now I’ll wait somebody explain me how to manage with these values, expecting better response of my Logitech X52 (too sensitive pitch and roll when doing little manoeuvers specially during refueling) -
AXIS SETTINGS
With U1, some possibilities were added to improve less precise controllers and I would like to experiment this with my Logitech X52 pro.
Unfortunately I can’t find them in my Falcon BMS.cfg file (I’m actually playing with 4.34 U2).
Can somebody help me to find these possibilities and how to use them. -
RE: Help for error 0xc000007b
Thanks all for your help.
After experimenting all the suggestions, I needed to uninstall Flacon et clear the registry, Reinitiate Windows, installing Falcon again and its running well again.:D
I just losted a lot of programs on my system disk and have to reinstall them. -
RE: Help for error 0xc000007b
Thanks to Dema, I uninstall all my Visual C++ and reinstall them after download but always this stupid error and imposible to play !
It’s the first time as I practice Falcon since 20 years ans I am very frustated. -
RE: Help for error 0xc000007b
Thanks to you but Memory test ok, GC drivers updated, and problem always here !
Other suggestions welcome… -
Help for error 0xc000007b
Since yersterday I can run the launcher but when clicking on Launch I get this error 0xc000007b, and can’t further. Same error with Arma3 but all other programms are running well
Any of the solutions I read are working, and reinstalling BMS Falcon gave the same error.
My config : Win 10, NVidia GTX 770, these two games are on a dedicated SSD.
I would appreciate any solution for this very disturbing problem, and thanks a lot for your help.