Hi BlackWolf, have happy Xmas.
it seems that i can not extract POH with any servers.
Thank you any way
Hi BlackWolf, have happy Xmas.
it seems that i can not extract POH with any servers.
Thank you any way
Hi BlackWolf. I downloaded POH 083 several times and i can not EXTRACT by using WINRAR. It says ERROR. I can’t understand why that file can not be extracted it.
I downloaded Balkans and no problem. I extracted it and soon the set up start.
Can you help me. I downloaded from different mirrors.
Thanks anyway
TigerShark, Thank you so much.¡¡¡¡¡¡¡¡¡¡¡¡ I clicked on the clock and ……it worked out at once.
Thank you very much.
Hi every body. I have installed several times BMS 434 and Updates 1 2 3 and 4 and allway happend that with some Tactical Engagement i can play it. When clicking on TAKEOFF it doesn’t work.
This happend with TR BMS 17 INTERCEPT
TR BMS 18 BARCAP
TR BMS 19 GUNS
TR BMS 20 HARPOON
TR BMS 22 OSAN TAEGU
With the rest, no problem.
I don’t know why with ones all working and with these 5 don’t.
Does anybody knows why and the solution?
Thanks
Hi every body.
After using BMS 434 without problem, then i can`t start the sim.
When pressing LAUNCH, it does not work and you can see that the Color of LAUNCH is now grey.
I desinstalled and installelled from the file FALCON BMS 434 SETUP.
It worked out but just for one day and next day again. The text LAUNCH in grey color and does not START the sim
Does anybody can help me !!!
Thanks in advance
Babite, thank you helping me again. After so many simulators, i never felt so confused like with this one. At the same time, it makes me feel good 'cause it has something special, may be beacause it is different, very realistic, much more tan the ones i had, except IL2 1946.
I am trying and trying to practice only offline, because i do nothing well. I am seen videos in YouTube and Reading manuals but it is hard for me. I hope one day will start seen the ins and out of BMS and then, i´m sure everything will be easier.
Until then, i keep going on, and getting mad many times.
It is good to read you that you also needed time to learn. I thought i was very bad because i was not able to learn much more of this Falcon BMS.
I set all setup in realistics, i allways did it with all my simulator.
Thank you again
sanandres
Babite, sorry for my late reply. I have no much time to use my pc. I will try to follow your advice. I tell you that i am very but on computers, but never happened this problem with others simulators, like IL2 1946, Xplane 8, all FSimulator. I don’t fly on line either, since i am very bad with this Falcom BMS sim, because i am not getting any progress, only to land instrumental at night.
Once i get any improvement, i’ll tell you.
Thank you so much for your help.
Regards
SANANDRES
HI Babite. I am getting mad. I am trying and trying and so and so. The last thing i thought was that may be, involuntarely, i chose the wrong command in the keyboard. Please, tell me if, when you press CTRL + o you can see that the command assigned for that is SIM ONLINE MODE. It is what i read in the setup keyboard control.
My hope is to ear that it is not correct that assignation. If so, let me know how it is set in your control keyboard.
SANANDRES
Blu3wolf,Thanks for the explanation. I will try to find out a solution, because without such mode in the radar, it will be very difficult to make easier the control of the radar and impossible to identify targets, friends or enemies.
Regards from spain
Hi Blue3wolf, as you say, the controls are set in the setup, and when i press Ctrl + o it shows the right command. But, when flying, i press Ctrl + o, nothing happend.
I don’t understand what you mean with Comm left or cmm outboard, or possibly IFF left. Can you speak easier for a person who is not good with coputers.
Regards
SANANDRES
Hi Cloud 9, i hold down the CTRL button first, and then, i press the button o, and nothing happen. No beep, nothing at all, only, i can read on the left up corner of the screen, my log name. Upset. That`s why i ask you for help.
I´ll keep trying new buttons or well , i don’t know what to press more.
THANK YOU CLOUD 9
sanandres
Sarge55, my pc system requirements are in my first thread of this page, when i say the PAPI’s Problem, you can read them. I don’t think it is a bad one. Now, i try and try to active the mode CONT in the radar by pressing CTRL + o and nothing happend.
What a bad luck i have, probably the worst luck in this foro.
What do you think???
regards. How the the temperatura there, in Canada by now??? Here, 15º Centigrades in the morning. Not so could now, end of Winter.
Sarge55, you’re an expert. PAPI is now visible, BUT the FPS has fallen from 35 - 45 to 27. Amazing. How can?
I don`t dont how to eliminate all no necesary sets, because i already did it, i setup following advisers and it ran fine, but now, 27 FPS.
For sure it is my Graphic Card, 1 Gb but ATI HD 6450, and probably it is not good enough.
Regards
Hi Lazystone, holding CTRL + o is the way i did and do. That’s why makes me mad.
THANK YOU
SANANDRES
Hi Sarge55, first of all, thank you for answering so fast. I am very bad with PC, and it is hard to understand it. I will try to follow your instructions, hoping that i will be able to find “Lighting Options” and “PER VERTEX”. I will try to do it, and will tell you the results.
About activate the mode ASIG or CONT or DMD, using CTRL + o, i wonder why this can happen to me, since i got a clean installation on a brand new formated pc windows7.
THANKS from spain.
Hi everybody. I have installed this great sim and unfortunely i got problems.
I can not see the Papi on any airbase in Korea, and i setuo the graphics, FPS 35-45. My pc is
HP Pavillon INTEL i7 870 core 2,93 Ghz
RAM 8 Gb
Graphic ATI HD 6450 1 Gb
Another problema is when i want to ACTIVATE the mode in the RADAR ASIG CONT DMD and once is chosen, i clic on CTRL + o and nothing happen. just that on the left up corner i read the my name of the login.
I setup CONFIGURATION No clouds and what people advise, because in the begining the FPS was 1 ¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡
Does anyboby can help me???
As i said, i installed it with all 7 updates this sim, on a new formated disc of my pc and it Works, but it is not normal not to see the PAPI and the problema with the activation on the radar`s modes. I am new on this sim ( used to XPLANE8 And Lock On M.A.F.