How does TGP zoom increase & decrease in F/A-18 please (what keyboard keys increase & decrease zoom)? Haven’t been able to find in forum search.
Thank you for any help ahead of time.
And no, Alt F3 & F4 doesn’t do anything.
How does TGP zoom increase & decrease in F/A-18 please (what keyboard keys increase & decrease zoom)? Haven’t been able to find in forum search.
Thank you for any help ahead of time.
And no, Alt F3 & F4 doesn’t do anything.
Saved missions F/A-18C carrier appears to run into the land & a/c explodes after ~1 min after ramp start.
Thank you
Thank you Mud for the updated version, but I prefer 3.04 because I like wings up & down by pushing Mic switch in, which is lost on 3.05. Also, in 3.05 the flaps switch in cockpit doesn’t move up or down when changing flaps switch on hotas.
Since first writing this I’m unable to deploy the wings to go up or down by pushing in the Mic Switch - beats me. I swear that was working prior to going to 3.05 then back again to 3.04. But I would really like to use the push in Mic switch for wings deployment & Mic Switch down for hook deployment for the F/A-18C.
Thanks again for all your great work for us!
Ok, I know what I must have done & forgot. I simply mapped button 26 (mic push in) to CKPIT: Wing fold - toggle.
Unable to locate a key for Hook up & down toggle - would map that to mic down.
@Mud:
I think your device ID’s are probably wrong so the DX buttons are off.
Check out: https://www.benchmarksims.org/forum/showthread.php?26581-Falcon-BMS-4-33-U1-Script-don-t-work-correct-in-this-update
Changed the order in DeviceSorting.txt file. Will see if that did the trick. Thx!!!
Yeah, all is good now. Re-ordering the devices in DeviceSorting.txt file fixed the issue.
Thanks again Mud!
Same issue here as pticuny’s & Win10 Pro 64bit.
Thx for your trouble with a revised vers. as your profile is much appreciated!!!
Is there a way to get frame rate using this profile plz? Cntl Z:R doesn’t work of course. Thank you!
Solved! Finally figured it out from your description Frederf. Thx so very much!!!
Here’s what I did with a little variation in my rig:
In Win 10 right click on start & select device mngr & control panel>Hardware & Sound>View devices & printers>Joystick - HOTAS Warthog>right click & select game controller settings.
Inside window you’ll see Joystick Throttle and peds & should be in that order top to bottom. If not select Human Interface Devices then right click on HID-compliant game controller & select disable. The disabled controller will then disappear in the game controller settings window. Then select uninstall - it should then disappear in Device Mngr. as well. Go to top of Device Mngr. & select Action>Scan for Hardware Changes. Do this to all game controller devices until the right order in game controller settings window are set in correct order.
Now I’m happy! Thx again Frederf!
I can find control panel & game controllers, but unable to find “set up game controllers”
Also unable to see which game controller is connected after disabling & uninstalling.
Thank you for further support.
Thx so much Frederf - will try reordering devices.
Yeah you’re right Mower.
Ok, thx Frederf.
Joystick trigger: 33 (first stage), & 38 (2nd stage)
Cursor enable on throttle: TQS RDR Cursor - Cursor Zero
So upset, yes angry that I “downgraded” to Windows 10 after all was just fine with Win 7. None of the scripts, Mud’s, Morphine’s or whosoever work especially DMS, TMS, etc. & some of the buttons on the throttle. Axis work but that’s about it.
With much regret!
@Mud:
And the TARGET script loads properly? No errors at the bottom?
My script simply wouldn’t load under Windows 10 on both my own and my wife’s pc until I had disabled the advanced power management for USB devices in the registry.
TARGET script loads properly - “compile successful.” Reinstalled BMS, reinstalled Thrustmaster drivers & firmware. Joystick buttons still don’t work although in the sim on setup page the buttons register when selected, e.g., button 32 or button whatever. The script just isn’t detected for Cursor enable, pickle button, all DMS, TMS and CMS keys, NWS and pinky buttons on joystick. Throttle works fine except for the mic switch to use IVC VHF & UHF. All works fine in DCS A-10C. I’m thinking it’s Win 10.
Thx for your trouble & thought!
P.S. All works fine on another computer still running Win 7.
Problem solved with Frederf’s excellent help:
Open Control Panel>Hardware & Sound>View devices & printers>right click on Joystick & select Game Controller Settings. Inside window you’ll see Joystick Throttle and peds & should be in that order top to bottom, but they are not in that order thus the problem.
Open Device Mngr.>select Human Interface Devices>right click on HID-compliant game controller & select disable. The disabled controller will then disappear in the Game Controller Settings window>right click on HID-compliant game controller in Device Mngr. again & select uninstal - it should then disappear in Device Mngr. as well. Go to top of Device Mngr. & select Action>Scan for Hardware Changes. Do this to all game controller devices until the right order in game controller settings window are set in correct order. This should do the trick - at least it did for me. Good luck!
Your most frequent customer is back, already!
Updated to Windows 10, scripts work now. The issue I have now is that the following simply aren’t detected with your script: Cursor enable, pickle button, all DMS, TMS and CMS keys, NWS and pinky buttons on joystick.
My Warthog stick is experiencing the same thing since going to Win 10. What to do?
Hello Mud, file indicates 3.01 still. I’ve greatly appreciated your work & updates mate!
Thx Moort! Ports are for routers right? Don’t have a router.
How does one open the ports plz?
Thx!
Hello Morphine!
I’m in the process of familiarizing & memorizing your profile. Previously I used CH products, now transitioning to the TM Warthog HOTAS. I’m having an issue trying to figure out why Autopilot Engage/Disengage button selects the LIGHTNING-Instrument Light Toggle as well as Parking Brake. How may I change this plz?
Additionally, is there a way to keep the Advanced Options settings vs. resetting them each time I enter the sim?
Thx very much!
Tagster