Morphine's Profile
-
This is going to be a stupid question, I know, but I am trying to get my radios working and using the Comms switch on my warthog. How does it work? I have to press via the keyboard to call up the relevant radio menu? T for tower…W for wingman…F for flight etc? There is no button mapped to do this? I must use the keyboard? Ok, assuming info have to first call up the appropriate radio menu, then how does it interact with my Comms switch on the WH throttle? Say, for example, the Comms switch up, which operated the UHF radio, and when I press it, gives a nice bit of squelch to show I have pressed it. I want to communicate with the tower: I call up the tower menu with T, then cycle through a page or two with subsequent presses of the T key on the keyboard, then select the cammand I want (for the purposes of this hypothetical, I want clearance to land, which is say 4). I do this, and the command is sent. There is nothing for the WH Comms UHF switch to do; all done via the keyboard, right? What’s the point of having a Comms switch at all if I can do it all via keyboard? Right, or have I got it very wrong? Grateful advice…
Apoll
-
Hi all!
Is there any 4.33 profile updated? If so, where could I take It?
Greetings.
-
In using this profile, do I check the Idle cutoff box in the config boxes in order to avoid having to press the idle cutoff switch in the Pit?
-
The comms switch are set up to be used for in game functions, up/down is for UHF/VHF comms in IVC and the Forward/back for data etc.
However, Morphine’s profile does have some shifted settings to automate a few keyboard functions IIRC they are for a couple of AWACS calls. Check his docs.
-
-
Thanks You very much, Blackduke!
-
Hey,
does anyone know how to enable the eyefly (free cam) with this profile?
Ctrl + z + f doesn´t work.
thank you
-
Hi Boxin,
I’ve been having the same problems as other people with the profile whilst using CH pro pedals and using win 10 as the OS.
I tried your directions what you gave to “direktor” in the thread, everything worked as expected until I plugged in the pedals. They assumed id 0. I then tried various ways, usb hub first/reboot/ch pro pedal/reboot etc to plugging in the warthog last but that didn’t work either.Many hours wasted I have come to a conclusion, why fight it.
Observations noted
eg Joystick only (No TARGET, Joystick HOTAS shows up in the Controller GUI in BMS,) TMS up, Button number 7 shows up and says TMS up in GUI (Pedals connected).TARGET on (Thrustmaster Virtual Game Controller (root) selected shows as ID0 in the Controller GUI in BMS ) TMS up, Button number 7 shows up and says TMS up in GUI (No pedals connected)
TARGET on (Thrustmaster Virtual Game Controller (root) selected shows as ID1 in the Controller GUI in BMS) TMS up, Button number 7 shows up and says LMFD: OSB - 7 Button - Push (Pedals connected)
It seems it is TARGET that is causing the error, without it activated everything works okay.
So if I leave the CH pro pedals at ID 0, could the key file numbers be amended to counter the problem I’m having?
I believe I would have to add 32 to all the Joystick numbers in the key file, but I’m not sure which to amend and which to leave. I want to use the Target profile/key as per Morphine’s original layout
Apologies if this isn’t making sense, it doesn’t to me neither.
Any help would be greatly appreciated.
Thanks in advance
DarrellHi Splash,
It makes sense, the exact same thing has happened to me in the past. Every single time this has happened I have uninstalled BMS (properly with the setup uninstaller), then reinstalled.So this is what I would do in this order. Also some tips…
Tips:
A) I honestly NEVER even give a thought to controller ID in BMS. I do not think this problem has anything to do with the ID.
B) I never mess around with the controller drop down in the controls screen….ever. I never even look at it.Actions to do:
A) Uninstall Falcon BMS - Don’t backup anything. Complete Do-over, fresh log book… everything. Reinstall.
B) I created a new version of the key file for you to try. I have removed all mappings on all MFDs. If you have MFDs, just map them later after everything is working. This is something new I have never tried.
Download link for key file with Pinky button shift state and no MFD mappings: https://www.dropbox.com/s/glydo2kcusu0ypr/Warthog__MFD_NO_MAP_DX-4_33.key?dl=0C) Don’t remap keys using the GUI. I hear this from people a lot. I do it anyway and it has never messed up my key file. Ever.
Other notes:
There are apps out there you can google which will give you an easy interface to change controller IDs. I had MASSIVE problems regarding controller IDs changing all the time in IL2-BoS. It drove me up the wall and I try to avoid this topic at all costs - haha. In IL2 I just bit the bullet and would remap my keys every time they changed (usually when I unplugged the controllers for one reason or another then plugged them back in, which would assign them a new ID).I don’t use a USB hub, or have one which I can test with, so regarding the hub; I apologize but I don’t have the ability to accurately trouble shoot this variable.
As I said earlier, this exact same problem has happened to me. I have fixed it every time by completely uninstalling, then reinstalling a fresh copy, then I use a backup of the key file.
Have you tried plugging the throttle and the stick directly in to your motherboard USB ports and bypassing the hub with only the Warthog?
I’m a programmer irl and I tend to just use logic to trouble shoot. Regardless of our operating systems, regardless of how everything is setup, our computers all basically work the same way, just different variables.
So the bottom line is I will help you get to the bottom of it no matter how long it takes so let me know how it goes.Lets take this PM to the forums so others can see the trouble shooting information if they run in to the same problems.
Cheers!
~Boxin -
Hey,
does anyone know how to enable the eyefly (free cam) with this profile?
Ctrl + z + f doesn´t work.
thank you
I use Trackir, but if you can explain to me how this basically works I can help.
More specifically, is your Ctrl + z + f binding in the cam software or is this a BMS bind and function? I can alter the key file for you for your specific needs.
I.E……With trackir, all hotkeys I use are bound through the Trackir software.
-
Thanks Boxin
Will do some testing and will report back (hopefully sometime this week)
-
Hi Guys,
I have this problem now: the file ‘Wartogh_DX’ has changed the icone and now is like to notepad and does’t work.
I tried to download a new one, but every time I saved the file, the icone was always like a notepad and not white as before.
When I entry in BMS 4.33/user/config there are all KEY File blue like a notepad (BMS-Basi, Blank, Full, Minimum, Pitbuilder, Bms, Keystrokes and Warthog_DX) and the same on 4.32.
What should I do?
Thanks a lot -
Hi Guys,
I have this problem now: the file ‘Wartogh_DX’ has changed the icone and now is like to notepad and does’'t work.
I tried to download a new one, but every time I saved the file, the icone is always like a notepad and not white as before.
When I entry in BMS 4.33/user/config there are all KEY File blue like a notepad (BMS-Basi, Blank, Full, Minimum, Pitbuilder, Bms, Keystrokes and Warthog_DX) and the same on 4.32.
What I have to do?
Thanks a lotcheck this out
http://www.sevenforums.com/tutorials/178296-file-extension-type-unassociate.html#option3
cheers
-
Thanks DonLduk,
I tried to save the file as ‘notepad ++’ and at first sight it seems to work properly.
I use Windows 10.
I cross my fingers.
Cheers. -
Thanks DonLduk,
I tried to save the file as ‘notepad ++’ and at first sight it seems to work properly.
I use Windows 10.
I cross my fingers.
Cheers.Heres the steps for ya.
-
Download Notepad++. Use this to edit all sorts of files from *.cfg files to Falcon BMS *.key files. Its awesome. Link: https://notepad-plus-plus.org/
-
Open your key file. Right click the key file (which is now a txt file). Choose “Open With” then choose Notepad++ as the program to open it with. Or just launch Notepad++ and go to File/Open then browse to the file.
-
Once the file is open in Notepad++ do this…
A) In Notepad++ go to File/Save as…
B) In the Save As box which pops up… look at the very bottom.
You’ll see a drop down menu. It says “Save as Type”. Click that and the option at the very top of that drop down list says “All types (.)” - Choose that.C) Now, in the box above it, the “File Name” box, type in the name of the file and add “.key” at the end of it. I.e. - “Warthog_DX.key” <-you can just copy and paste that in to the file name box. (Without the quotes)
D) Click Save and BOOM - you got your key file. :bdance:
E) When you go in to Falcon BMS and go to load a key file you will now see it there. As you probably know, just make sure it is saved in the User/Config folder
If you have any problems at all bud just let us know, but if you follow those steps you’ll be good to go.
Technically you could use Windows notepad to do this but I figured it is a good oportunity to introduce you to Notepad++ which is much better and just full of awesome.
Cheers! -
-
I went and merged the Morphine’s Profile with the new Default Keyboard layout. Morphine’s profile lacked some of the functionality found in the latest version, like the UHF radio frenq binds. It’s also nice to have a key map that matches the default one when training new people. In order to deconflict the profile, keybinds were changed for some the joystick functions and those functions are not reflected in the keyboard layout pdf. Install is similar to Morphine’s, you need to run a profile and use the key map in game. Both are available here https://www.dropbox.com/sh/4l2j2sbbkkmwoaa/AAAMks8YYDvUsOQ6vr7bi5bia?dl=0
If You’re having troubles with keybinds, make sure your virtual device is the 1 direct input device. You can check the order by typing Joy.cpl in the start menu, the virtual device should be the top. If it’s not unplug your other devices and move them to different USB ports.
-
Who has a complete list of commands to PDF?
-
Range knob – has anyone gotten this to work?
Under Morphine’s profile, this is mapped to the China Hat switch but I cannot get it to work at all. It is configured correctly in the sim and I can see the blue bar go forward/backward in the Controllers -> Advanced menu but it does not work in the 3D pit.
-
I think that you need to push the china hat more than 1.5 seconds to take the command, as with the pickle button when you fire Slammers. Have you tried this?
-
Who has a complete list of commands to PDF?
Morphine’s very first post in the thread. I only updated his creation, I didn’t change anything.
The PDF he created is still very much relevant. -
Morphine’s very first post in the thread. I only updated his creation, I didn’t change anything.
The PDF he created is still very much relevant.Thank you, unfortunately I did not understand because your profile does not work …