Morphine's Profile
-
Hi Guys,
I have this problem now: the file ‘Wartogh_DX’ has changed the icone and now is like to notepad and does’t work.
I tried to download a new one, but every time I saved the file, the icone was always like a notepad and not white as before.
When I entry in BMS 4.33/user/config there are all KEY File blue like a notepad (BMS-Basi, Blank, Full, Minimum, Pitbuilder, Bms, Keystrokes and Warthog_DX) and the same on 4.32.
What should I do?
Thanks a lot -
Hi Guys,
I have this problem now: the file ‘Wartogh_DX’ has changed the icone and now is like to notepad and does’'t work.
I tried to download a new one, but every time I saved the file, the icone is always like a notepad and not white as before.
When I entry in BMS 4.33/user/config there are all KEY File blue like a notepad (BMS-Basi, Blank, Full, Minimum, Pitbuilder, Bms, Keystrokes and Warthog_DX) and the same on 4.32.
What I have to do?
Thanks a lotcheck this out
http://www.sevenforums.com/tutorials/178296-file-extension-type-unassociate.html#option3
cheers
-
Thanks DonLduk,
I tried to save the file as ‘notepad ++’ and at first sight it seems to work properly.
I use Windows 10.
I cross my fingers.
Cheers. -
Thanks DonLduk,
I tried to save the file as ‘notepad ++’ and at first sight it seems to work properly.
I use Windows 10.
I cross my fingers.
Cheers.Heres the steps for ya.
-
Download Notepad++. Use this to edit all sorts of files from *.cfg files to Falcon BMS *.key files. Its awesome. Link: https://notepad-plus-plus.org/
-
Open your key file. Right click the key file (which is now a txt file). Choose “Open With” then choose Notepad++ as the program to open it with. Or just launch Notepad++ and go to File/Open then browse to the file.
-
Once the file is open in Notepad++ do this…
A) In Notepad++ go to File/Save as…
B) In the Save As box which pops up… look at the very bottom.
You’ll see a drop down menu. It says “Save as Type”. Click that and the option at the very top of that drop down list says “All types (.)” - Choose that.C) Now, in the box above it, the “File Name” box, type in the name of the file and add “.key” at the end of it. I.e. - “Warthog_DX.key” <-you can just copy and paste that in to the file name box. (Without the quotes)
D) Click Save and BOOM - you got your key file. :bdance:
E) When you go in to Falcon BMS and go to load a key file you will now see it there. As you probably know, just make sure it is saved in the User/Config folder
If you have any problems at all bud just let us know, but if you follow those steps you’ll be good to go.
Technically you could use Windows notepad to do this but I figured it is a good oportunity to introduce you to Notepad++ which is much better and just full of awesome.
Cheers! -
-
I went and merged the Morphine’s Profile with the new Default Keyboard layout. Morphine’s profile lacked some of the functionality found in the latest version, like the UHF radio frenq binds. It’s also nice to have a key map that matches the default one when training new people. In order to deconflict the profile, keybinds were changed for some the joystick functions and those functions are not reflected in the keyboard layout pdf. Install is similar to Morphine’s, you need to run a profile and use the key map in game. Both are available here https://www.dropbox.com/sh/4l2j2sbbkkmwoaa/AAAMks8YYDvUsOQ6vr7bi5bia?dl=0
If You’re having troubles with keybinds, make sure your virtual device is the 1 direct input device. You can check the order by typing Joy.cpl in the start menu, the virtual device should be the top. If it’s not unplug your other devices and move them to different USB ports.
-
Who has a complete list of commands to PDF?
-
Range knob – has anyone gotten this to work?
Under Morphine’s profile, this is mapped to the China Hat switch but I cannot get it to work at all. It is configured correctly in the sim and I can see the blue bar go forward/backward in the Controllers -> Advanced menu but it does not work in the 3D pit.
-
I think that you need to push the china hat more than 1.5 seconds to take the command, as with the pickle button when you fire Slammers. Have you tried this?
-
Who has a complete list of commands to PDF?
Morphine’s very first post in the thread. I only updated his creation, I didn’t change anything.
The PDF he created is still very much relevant. -
Morphine’s very first post in the thread. I only updated his creation, I didn’t change anything.
The PDF he created is still very much relevant.Thank you, unfortunately I did not understand because your profile does not work …
-
Thank you, unfortunately I did not understand because your profile does not work …
Boxin’s profile works fine. I have personally run it on two separate machines, win 7 and 10. You either are not running the profile, using the right keymap, you have win 10 power saving on your USB ports or your Target combine is not the first DirectX device.
-
Thank you, unfortunately I did not understand because your profile does not work …
If you need help just post what the problem is and I will be happy to take the time to help you.
It does work. I use it every single day.
-
Im using Morphine profile with 4.33, On Start up I get as far a Start 2 and watch the rpm spool up to 20 then move both throttle’s forward from off to idle and nothing happens, I cant seem to sort it ,any help would be greatly appreciated
Kind Regards Aeronut -
In the configuration (f4patch), go to the “Hardware” section and activates the “Iddle Cutoff” box. Save the changes and see if the problem is resolved.
Fresco
-
Thanks for the files, and the effort to put these together.
Steve
-
Thanks so much for this profile, I only just got my Warthog HOTAS and TARGET was giving me a brain ache. Ex CH user :neutral: Took an age to get 4.32 sorted for that setup (many thanks to frederf) really weren’t looking forward to a repeat.
Much respect and best regards.
Fubar2Niner
-
Hi, does anyone know if the key combination for the ‘spotlight’ is active in this profile, and if so, what the key press is? I think the callback is SimSpotLight, I see this is mapped to Shift + Ctrl + L. But rather than toggling the spotlight, this rotates the Primary Instrument Panel lighting Knob on the Lighting Panel. The one I’m after is the torch type light that can be switched on with a keyboard combination once the ELEC Panel switch is set to MAIN PWR or BATT. Very useful for a night ramp start.
-
Finally!! Thank you Morphine for this profile! My mouse cursor is working now. BMS is still much different than AF but at least most of the HOTAS functions I was used to are available on the Warthog. I still may go back to the Cougar though. There’s a lot to be said for using the Viper TQS.
-
Thanks a lot Morphine for your profile, I am new and is very usefull using yours.
I tried to read all the posts to check if a doubt I have was covered and I found nothing. It is the following: When I land with the Falcon I need to unblock the front wheel to drive the plane. To do that I need to press SHIFT -. Can you advice how can I introduce that comand in the Hotas? Doing through the keyboard is a bit unconfortable because I need to free my hands from the Hotas.
-
The callback is present in Morphines profile, it’s ‘SimMissileStep 4 -1 -2 0 0X0 0’
Nose wheel steering is activated by weight on the front landing gear?, WOW (weight on wheels)