Flounder's X52 Pro Keyfile/DX Profile for BMS 4.33
-
Radar slewing doesn’t work for me on this profile.
- In the Saitek profile editor, using the minimouse results in the correct F-keys being triggered
- In the in-game key setting, and in the cockpit, using it doesn’t illicit a response
- The mouse fire button calls Radar cursor up
- I can press the f-keys in-game and they work fine.
Do you have any idea what I might be doing wrong? I’ve already made sure my track-ir keys are rebound, and I’m not running teamspeak.
In-game, inputs from the mini-stick are simply ignored.edit
It’s a problem with other profiles too, so I’ll have to look around some further.Try expanding the bands, i had the same problem and expanded the bands on the minimouse.
I use 0-15% up 16-84% middle 85-100% up same for left and right and it started to work 100% -
Thank you for taking the time to reply. Those settings were all in order. I do have Logitech g11 keyboard, but I don’t think those use DX buttons. I’ve found a different fix to my problem in the mean while: Instead of the latest drivers for Win7, I installed the Win10 beta drivers and the mouse controller works with this (even though I’m on Win7). Hopefully other people will find this to be a fix to their issue.
Hmmmm …. sounds very similar to this: https://www.benchmarksims.org/forum/showthread.php?23773-Saitek-X52PRO-radar-cursor-issues&p=343273&viewfull=1#post343273
-
Try expanding the bands, i had the same problem and expanded the bands on the minimouse.
I use 0-15% up 16-84% middle 85-100% up same for left and right and it started to work 100%would u mind in sharing your .Pr0 file with those “bands” corrected? for some reason i can’t edit 'em
-
Here is the modified .pro file with the radar bands changed
-
Here is the modified .pro file with the radar bands changed
Many many many thanks Sr!
-
Did this fix your problem?
-
-
Starting from scratch, just installed BMS 4.33 and I have Windows 10, will your profile work and if so what order do I install drivers and program. I did a lot of reading of other profiles, it gets a little confusing after a while. I have the Satek X52 Pro set up and just getting started.
thanks
tux139 -
Starting from scratch, just installed BMS 4.33 and I have Windows 10, will your profile work and if so what order do I install drivers and program. I did a lot of reading of other profiles, it gets a little confusing after a while. I have the Satek X52 Pro set up and just getting started.
thanks
tux139If BMS works for you, this profile will work.
I do not recall the order in which the Saitek software and drivers are installed. It should be specified in the Saitek instructions and/or on the Saitek support site.
One key note, in the Saitek Control Panel, you should NOT have the Clutch Mode enabled …. like so:
-
Clutch mode was enabled, I have 4.33 working,
thanks for quick reply, looks awsome so far!
tux139 -
I am finding things very unstable, flying is iratic, even making turns it over corrects, it is like things are going to slow my system is fast enough, must be Windows 10, I will load on my XP computer and compare? If I let off the stick in a turn it goes into a roll, trying to correct it is like slow motion and over corrects the other way, I know this sounds crazy but just isn’t stable.
\thanks for you help, much appreciated, will get back after my XP install on my other computer,
I have the latest drivers still no go,
Tux139AMD Athlon 11X64 630 Proces, 2.8 Ghz. 64 bit
-
This could be any number of things …. keyfile conflicts, mis-assigned axes, drivers, HOTAS, etc.
If loaded and set up properly (as shown in the first post), it is extremely unlikely due to the keyfile. One thing to check is trim … make sure the trim is zero’d.
You can see in-game frame rates by pressing CTRL-C (release, then) F. You need ~25 FPS minimum, otherwise it’s a ‘slide show’.
Also, do you have any devices connected other than an X52 Pro (MFDs, ICP, etc.)?
-
I will double check the install , and other suggestions ,thanks for the heads up, only x52 hooked up.
-
…… only x52 hooked up.
Sorry, but to clarify …. X52? or X52 Pro?
This will NOT work properly with an X52 … pro only. The buttons are numbered differently so the command shown here would be something else on an X52.
-
I can not get the FPS to show up? I notice your profile name (Flounder x52 pro v5)in the throttle window is running constantly from right to left, it should stay in the window and not move. The graphics in the game look good, I can toggle the functions on your profile in the setup of the game , the throttle does not work properly and it does roll in the turns without stopping. Looks like the drivers for the Saitek. Will uninstall the drivers and load again.
thanks for your help. -
Profile name scrolls across the MFD for me.
You’ve loaded the keyfile & the Saitek pr0 file and done (and saved) the setup as shown in the BMS SETUP UI?
Hopefully drivers fix it.
-
I am wondering if I have a corrupt file some where? I loaded my 4.33 to a USB drive and transfered to my xp computer, loaded all with the Saitek program and then I had the same problem as my W10 computer. Seems the throttle is not working? I loaded my Freefalcon 6 in my XP computer and it worked perfectly with the Saitek. I will download BMS again and reload and get back to you, thanks for your patients.
takes a while!!PS. I went into the registry and removed all the Saitek files I could then reloaded latest drivers no luck same condition. Every thing looks good as in your instructions in the programming. Yes X52 Pro.
-
I found an old 4.32 on my other computer 32 bit and loaded it up with your profile and it worked good. I have updated my Video card drivers thought maybe that would fix this, no luck. I hate to give up on this knowing it is a fantastic sim but am at the end of my rope, I downloaded the program again clean install similar problem, as soon as it finishing loading and hands over the controls I can see the F-16 moving showing that there is a problem still. When I turn slightly it will keep going a little so I turn back slightly and it over corrects, I notice the ICP shows low on the display and does not change this look and power is not working properly, the graphic are so good in every other way??? I don’t think it is a Win 10 problem, I loaded this program in my XP computer and it did the same thing. I might try making my own profile with the
Saitek program just minimal to see if that helps but am doubtful.
thanks for all your help,it is my issue,
I know it is a great Sim as all have stated,
tux139 Cheers. -
I can not get the FPS to show up? ….
I just realized I gave you the wrong key combo. It should be ALT-C (release, then) F. FPS should show in the upper left corner.
Some of what you describe sounds like low frame rates. Other things you describe sounds like axes not assigned.
What are you PC specs?
-
Frame rate is 4 and 5??? Wow!
Specs. AMD Athalon X4 630 2.8 ghz.,
Ram 6 gig, 64 bit x64 processor.
Nvidia geforce 9100 and I just installed the latest drivers