Saitek X-52 Profile
-
The profile I posted has TGP zoom in and out. T3 shifted and T4 shifted.
SimRangeKnobUp 266 -1 -2 0 0x0 0
SimRangeKnobDown 267 -1 -2 0 0x0 0If you want to change the button you change the numbers 266 and 267. When shifted you add 256 to the DX button.
-
For sure Jackal. I hope it is to your liking. Let me know if you have any suggestions to change it.
Thanks a lot for this also, Viking.
With best regards,
-
Good morning.
I have a problem with this wonderful profile.
I gained some MFD trhustmaster , I have installed and do not work
with the profile .
I lose X52 commands and I get on the MFD .
For example , VHF and UHF now have in the LMFD OSB20 and GAIN UPI’m going crazy trying to find the solution.
Thank you very much
-
Good morning.
I have a problem with this wonderful profile.
I gained some MFD trhustmaster , I have installed and do not work
with the profile .
I lose X52 commands and I get on the MFD .
For example , VHF and UHF now have in the LMFD OSB20 and GAIN UPI’m going crazy trying to find the solution.
Thank you very much
If I understand you correctly, the profile works fine for you without the MFDs plugged in but when you plug the MFDs in the VHF and UHF from the POV hat on the throttle moves to the LMFD OSB20 and GAIN UP. I am not familiar with MFDs. Does an MFD use DX callbacks or do you assign it a keyboard button? Please tell me what other buttons have problems. The MFDs should not interfere with the DX callbacks unless the MFDs use the same callback or the MFD is assigned to the same key as the callback. Please tell me how you map your MFDs.
-
Is there a Non-TrackIR version for 4.3.3? Or is it fairly simple just to remove the track IR bits?
-
Can someone give me a link to a good profile for the bms 4.32 that uses the track ir.
Total newbie here.
I have 4.32 but I do not have 4.33 yet. I just recently bought a track ir and I have the X52 non pro. I just tried the game last night with a profile I found online, I think it was Ironman or something, but the thrust did not work, and after switching views the track ir stopped working.
I can’t wait to learn how to fly this thing, I have had the game for years, and with a broken ankle and time on my hands, I figure that this time I will do all those training missions and fly this baby.
-
Is there a Non-TrackIR version for 4.3.3? Or is it fairly simple just to remove the track IR bits?
I can get you set up. The only thing we need to do is remap the tracker center and reload buttons then add any POV controls you would like. Let me know what you want and where and we can make it happen.
-
Can someone give me a link to a good profile for the bms 4.32 that uses the track ir.
Total newbie here.
I have 4.32 but I do not have 4.33 yet. I just recently bought a track ir and I have the X52 non pro. I just tried the game last night with a profile I found online, I think it was Ironman or something, but the thrust did not work, and after switching views the track ir stopped working.
I can’t wait to learn how to fly this thing, I have had the game for years, and with a broken ankle and time on my hands, I figure that this time I will do all those training missions and fly this baby.
The OP post and download is for 4.32 with trackir. Just follow KesMonkeys instructions and use all of his files.
https://www.benchmarksims.org/forum/showthread.php?5855-Saitek-X-52-Profile
-
Thanks for the help. Maybe its just because Ive been grading papers for 9 hours, but I think I’m missing something here. Where do I download those files? They are not available to download on that first page. Or is the download link taken down because of the negotiations going on? Or am I just missing something obvious because its too late and I’m too tired?
Edit,
The answer was that I was too tired. I found it, lol. Thanks!
-
Ok Im running into a few problems problems.
First the throttle doesn’t work for airspeed, instead the precision slider controls air speed.
Second, I have windows 8.1 and I could not find the x52 properties menu to make the changes needed to enable mapping of the clutch button.
Third I could not find the line set g_bPilotEntertainment 0 so I could change it to 1 to enable winamp controls (which I have no idea what that means yet.) I did use word pad and I did look through falcon bms.cfg files.
Thanks for having patience with someone not familiar with all of this stuff.
-
Assign your axes in the SETUP –> ADVANCED screens:
After you plug in your X52, right click on the system tray Saitek Icon to open the Saitek Control Panel, like so:
-
Got it! Thank you.
Now after two days of trying to get everything working I can start to get my self killed in the training missions:p
-
Will the profile on the first page work with 4.33.1? If not, are there any profiles for 4.33 with track ir?
I’m just getting ready for 4.33.1. Great thing to look forward to as I learn how to fly with 4.32 for now.
-
Will the profile on the first page work with 4.33.1? If not, are there any profiles for 4.33 with track ir?
I’m just getting ready for 4.33.1. Great thing to look forward to as I learn how to fly with 4.32 for now.
It may work but it is not recommended. Use the 4.33 files I posted and let me know if you have problems. You shouldn’t. I copied and pasted the callbacks into the 4.33.1 key file just to be sure but I saw no changes that would cause problems. You should not have to do that. If you have problems let me know and I will upload an updated file.
-
Guys, my shifted keys are not working… can someone help please? I’m using 4.33.1
-
Guys, my shifted keys are not working… can someone help please? I’m using 4.33.1
I sent you a PM. Let me know if you get everything sorted out.
The Keyfile is as shown below except for:
Stick
-Fire A=NVG
-Shift trigger first detent=Wheel Brake
-Shift trigger second detent=Paddle Switch
-T1=Gear toggle
-T1 shifted=Eject
-T2=CAT toggle
-T2 shifted=Left AP
-T3=STRPT Up
-T3 shifted=HSD Up
-T4=STRPT Down
-T4 shifted=HSD Down
-T5=Weapon View
-T5 shifted=Look Closer
-T6=3D Pit
-T6 shifted=Right APThrottle
-Rotary 2=TGP Zoom
-Precision Slider=HUD brightness
-Mouse Button 1 is open for VA of your choice or anything else. It is mapped to Home key.
-LCD Panel Controls left button shifted=Interior Lights
-LCD Panel Controls right button shifted=Instrument Lights -
Hello.
I just started with Falcon BMS, and of course I need help already.
I did everything to setup this profile as it should, but in the Profile Editor there is no sign and reactions of the buttons.
Any help is appreciated! -
Hello.
I just started with Falcon BMS, and of course I need help already.
I did everything to setup this profile as it should, but in the Profile Editor there is no sign and reactions of the buttons.
Any help is appreciated!A lot of callbacks and keys have changed since 4.32. This profile, most likely, won’t work anymore, and needs an update.
I made one for the Saitek X-52. It may suite you.
-
A lot of callbacks and keys have changed since 4.32. This profile, most likely, won’t work anymore, and needs an update.
I made one for the Saitek X-52. It may suite you.
This post is incorrect and misleading. This profile was updated to 4.33.1.
-
Hello.
I just started with Falcon BMS, and of course I need help already.
I did everything to setup this profile as it should, but in the Profile Editor there is no sign and reactions of the buttons.
Any help is appreciated!The profile is almost entirely DX so it will not show in the profile editor. It will show in BMS. Use the files in posts 321 and 340. Start with Keysmonkey’s files from the first post then replace the duplicate files with the ones in post 321. Depending on what you like more you can use the keyfile from post 321 or post 340.