YAME64 suite
-
Tried the november update- no MFD’s
Single pc. -
Tried the november update- no MFD’s
Single pc.Several people have made that observation and reported everything worked fine after a reboot (or 2 reboots :D). Also make sure you still have BMS path/keyfile/DTC set correctly and have 3Dhook active, or RTTtexture set to 1 in bms config is not using 3D hook; and set BMS for extraction and not using server/networked.
-
ok test1
Installed the 1.1.0 over 1.0.0Checked the path’s and bms conf
Configged Yame
2 times pc reboot
No mfd’s
–-----------------------------------------------------------------
server offClient only
MFD’s on
Windows specified
Now i’ll test with hook on
-
ok test1
Installed the 1.1.0 over 1.0.0Checked the path’s and bms conf
Configged Yame
2 times pc reboot
No mfd’s
–-----------------------------------------------------------------
server offClient only
MFD’s on
Windows specified
Now i’ll test with hook on
In the shots above you are NOT using hook extraction, so in your falcon bms.cfg file you must enable RTT extraction. If you want YAME to hook texture extraction then you don’t need to set that configuration.
-
Test 2 with hook on
No joy
-
Hi Roccio
In test 1 i didnt use hook and RTT was enabledIn test 2 i think i used hook right ?
RTT disabled -
Hi Roccio
In test 1 i didnt use hook and RTT was enabledIn test 2 i think i used hook right ?
RTT disabledYes, please check that d3d9.dll is in your <falcon base=“” path=“”>\Bin\x64
and check also that yame_d3d.cfg has correct values.
Next release of YAME will solve many of those problems, I think we have simplified a bit.</falcon>
-
Guys a little help pls 'cause i’m confused…I’m currently running single pc-2 monitors 1280x768-ATI R7260X 2Gb DDR5 card
How do i get on running BMS on main(left) screen and YAME Cauges on second(right) screen??
Thx in advance -
Guys a little help pls 'cause i’m confused…I’m currently running single pc-2 monitors 1280x768-ATI R7260X 2Gb DDR5 card
How do i get on running BMS on main(left) screen and YAME Cauges on second(right) screen??
Thx in advanceWe do not recommend having your second monitor to the right of your main (bms) screen. When BMS changes resolution, it will move around all that is left & down of the 0/0 starting point of you main screen. Best is to set your secondary monitor to the left and/or top of the main screen in the windows arrangement.
If you have both monitors on 1280x768, and the second screen on top of the main screen, both aligned with the left border:
Main monitor top left is coordinate 0/0 (x/y). And bottom right is 1280/768.
Second monitor top left is then 0/-768 and bottom right is 1280/0.Leave BMS as is. In YAME, set the window settings to size 1280x768 and position 0 -768 without borders (border checkbox unset) and voila.
-
Thx for the reply, but my main issue is that both BMS and Yame are diplayed only in one monitor…How can i arrange them to display seperately?
I have main screen right-sec screen left -
Thx for the reply, but my main issue is that both BMS and Yame are diplayed only in one monitor…How can i arrange them to display seperately?
I have main screen right-sec screen leftIn yame you can set window coordinate in client/window tab or you can go to client/window tab hit edit gauges and move the window where you want. Hit esc then save. It’ s all in the manual
-
THANK YOU for making and sharing this awesome software. It is great. And the moving map with North Up is a dream come true for me.
FB
-
Yes, please check that d3d9.dll is in your <falcon base=“” path=“”>\Bin\x64
and check also that yame_d3d.cfg has correct values.
Next release of YAME will solve many of those problems, I think we have simplified a bit.</falcon>
Then i better stay with the 1.0.0
PORT: 0
FPS: 30
MFD: 0 0 0 0 0 0 0 0 0 0 0 0
DEDRWR: 0 0 0 0 0 0 0 0 0 0 0 0
TYPE: NULL -
Fixed !! Thx for the quick replies, awsome software!!!
-
How can i add a map from a diferent thater (for example Ikaros) in order to be displayed on the central pedestal?
-
How can i add a map from a diferent thater (for example Ikaros) in order to be displayed on the central pedestal?
For now you need to replace the one in <yame base=“” dir=“”>\gauges\cp60\maps
Should be 2048x2048 32 bit png</yame>
-
For now you need to replace the one in <yame base=“” dir=“”>\gauges\cp60\maps
Should be 2048x2048 32 bit png</yame>
I already did that but in scroll down menu of center pedestal in Map options, Balkans and Korea only displayed
-
I already did that but in scroll down menu of center pedestal in Map options, Balkans and Korea only displayed
Yes, the version of YAME you have supports only those 2 theaters.
-
I’m back from my forced vacation!!
I really hoped the new version would be out by now. Roccio, what are you doing man?!
-
I’m back from my forced vacation!!
I really hoped the new version would be out by now. Roccio, what are you doing man?!
ehehehe welcome back!
We are working hard, but RL job takes too much time… keep in touch