Falcon MFD Software for android tablets
-
OK, I’m getting there. Knowing now that it’s the keyfile I had a look and (I think it’s been mentioned on this thread before) one has to switch the small ‘x’ in the keycodes to capital ‘X’, then it works. Then check a second time that no ‘x’ was changed that wasn’t supposed to - the server didn’t like the switch to SimICPNeXt
Still can’t get the EWS Mode and Program knobs to work; haven’t found the correct keycodes yet.
Thanks again for the help, didn’t know where to start…
Are you using my keyfile as is…or did you modify it?
-
I’m using the keyfile I had before, just with the modification as above after I compared it to your keyfile - now it works.
-
I’m using the keyfile I had before, just with the modification as above after I compared it to your keyfile - now it works.
Roger that. I always recommend that all buttons and functions be checked with my keyfile first. Then make changes as necessary. That way, you know that it is not a software or keyfile issue….but rather something happened during the modification process. Good to hear all is well now.
-
Thank you so much for this great software.
I’m having just one problem - I’m getting a lot of lag on the android tablet.
Reducing the update frequency and changing the server IP address isn’t making any different.
Can anyone suggest a solution? (Or help identify the cause of the problem?)
Thanks!
tsb47
-
Thank you so much for this great software.
I’m having just one problem - I’m getting a lot of lag on the android tablet.
Reducing the update frequency and changing the server IP address isn’t making any different.
Can anyone suggest a solution? (Or help identify the cause of the problem?)
Thanks!
tsb47
can you send me log file
-
Thanks will do once my Pad is charged up again…
-
Well, in short, OMG! That was a revelation! Thanks for all the effort put into that program! Amazing!
Does anyone know if something similar exists for the panels?
-
Thanks will do once my Pad is charged up again…
Did you ever get an answer to your question? Please post if available. Thanks
-
Did you ever get an answer to your question? Please post if available. Thanks
komcuru advised me to reinstall the app on my android device and make sure the device and server (ie main computer) should be on the same network segment ie, my IP addresses were:
Msg 2017.01.15 18:18:11 fnkReadXML –> ServerIP : 192.168.56.1
Msg 2017.01.15 18:18:11 fnkReadXML –> AndroidIP : 192.168.1.3I think those numbers needed to be the same. Not sure how to do that though! Guess I will google it!
Thanks
tsb47
-
It’s my understanding that all the IP addresses have to be on the same subnet, so yeah, find out what your main computer has in the way of IP address, then find out what your Android device has ( make sure it’s connected to your local router - not the mobile phone network ).
When I configured mine it was as follows:
Main PC ( Server / Game Machine 192.168.1.96
Android Device ( get this from the device itself, or your hub where it’s connected wirelessly 192.168.1.170Press the “Set” button on the android app and just accept the defaults.
If there are multiple IP addresses in the server software, just select the one that is you main WiFi connection and the same format as the android device.Close the app. Slide it shut ( extra safe ) . Close down the server. Start the server. Start the app.
Then things should be okay.
-
It’s my understanding that all the IP addresses have to be on the same subnet, so yeah, find out what your main computer has in the way of IP address, then find out what your Android device has ( make sure it’s connected to your local router - not the mobile phone network ).
When I configured mine it was as follows:
Main PC ( Server / Game Machine 192.168.1.96
Android Device ( get this from the device itself, or your hub where it’s connected wirelessly 192.168.1.170Press the “Set” button on the android app and just accept the defaults.
If there are multiple IP addresses in the server software, just select the one that is you main WiFi connection and the same format as the android device.Close the app. Slide it shut ( extra safe ) . Close down the server. Start the server. Start the app.
Then things should be okay.
Yep, I did this (I selected server IP to 192.168.1.6 and pad was on 192.168.1.2) and confirm that it is WAY faster. Thank you nacnud!
I am having another issue, however. When I press a button on the pad, it doesn’t always register in game. For example, in the HSD MFD page a CNTL press on the pad registers in game… but for some reason DCPL button on the same page does not…
For testing purposes I have the X-52 profile that came with the downloaded selected in both the MFD server and in Falcon itself. Should I send the log through as well?
Thank you so much for this support by the way - FANTASTIC!
Cheers,
tsb47
-
Yep, I did this (I selected server IP to 192.168.1.6 and pad was on 192.168.1.2) and confirm that it is WAY faster. Thank you nacnud!
I am having another issue, however. When I press a button on the pad, it doesn’t always register in game. For example, in the HSD MFD page a CNTL press on the pad registers in game… but for some reason DCPL button on the same page does not…
For testing purposes I have the X-52 profile that came with the downloaded selected in both the MFD server and in Falcon itself. Should I send the log through as well?
Thank you so much for this support by the way - FANTASTIC!
Cheers,
tsb47
Out of curiosity, is your PC connected wireless or through the Ethernet?
-
are all the latest keyfiles and updates and installation specifics still at the beggining of the thread… i really dont feel like going through 99 pages to find files and instructions… and i use an x65… anyone else using this with an x65 that has a keyfile i can borrow…
-
-
-
Hallo…thank for you work,but a don’t conect my ip adres with adres my tablet. Can you help my whot i do?
-
Hallo…thank for you work,but a don’t conect my ip adres with adres my tablet. Can you help my whot i do?
did you disable firewall
and did you run server as administratoralso can you send me log file (on tablet)
-
I have this error::::
Msg 2017.03.01 00:04:16 Falcon MFD –> Welcome
Msg 2017.03.01 00:04:16 onCreate --> WhichScreen : w640
Msg 2017.03.01 00:04:16 onCreate --> Screen Width : 2413
Msg 2017.03.01 00:04:16 onCreate --> Screen Height : 1440
Msg 2017.03.01 00:04:16 onCreate --> Screen Density : 3.5
Msg 2017.03.01 00:04:16 Falcon MFD --> Log File Path : /storage/emulated/0/FalconMFD.log
Msg 2017.03.01 00:04:16 fnkReadXML --> connection_params Readed
Msg 2017.03.01 00:04:16 fnkReadXML --> ServerIP : 192.168.1.120Msg 2017.03.01 00:04:16 fnkReadXML --> AndroidIP : 192.168.1.13
Msg 2017.03.01 00:04:16 fnkReadXML --> ServerPort : 21111
Msg 2017.03.01 00:04:16 fnkReadXML --> MsgPort : 21111
Msg 2017.03.01 00:04:16 fnkReadXML --> LMFDPort : 21112
Msg 2017.03.01 00:04:16 fnkReadXML --> RMFDPort : 21113
Msg 2017.03.01 00:04:16 fnkReadXML --> DEDPort : 21114
Msg 2017.03.01 00:04:16 fnkReadXML --> MisSchPort : 21115
Msg 2017.03.01 00:04:16 fnkReadXML --> RWRPort : 21116
Msg 2017.03.01 00:04:16 fnkReadXML --> RefreshRate : 100
Msg 2017.03.01 00:04:16 SocketListenerMsgPort --> Listen Started on Port : 21111
Err 2017.03.01 00:04:16 threadHandlerHataKayit --> java.net.UnknownHostException: Unable to resolve host "192.168.1.120
": No address associated with hostnameServer and client IP are ok…
-
Wow… I’m enjoying this a lot! It’s much less laggy than other solutions i’ve tried. I have a small problem… It say my A/B is on when it’s not. Any ideas?
Thanks
Domestos -
Wow… I’m enjoying this a lot! It’s much less laggy than other solutions i’ve tried. I have a small problem… It say my A/B is on when it’s not. Any ideas?
Thanks
DomestosIt may just be out of sync. For example, if I turn on my jammer through the cockpit and then use the switch on my tablet, my ECM will now be out of sync. Tablet shows it is off but the cockpit says it’s on. This may not be your case…but just a thought.
Out of curiosity, are you running a “Quad Core” tablet? I am asking since you mentioned “less laggy”.