Mud's Profile
-
Hey guys,
Havent played F4 om about 4 months. Got on tonight and the profile is acting up.
For example, on the master arm switch, it only activates when the (Flow R) switch is clicked up and not down.
Which means I have to cycle it 3 times before getting it to the position I want.
Any ideas?TIA
-
I’m not sure if I quite understand the problem, but the way the switch is set up is:
Up = Master Arm ON
Down = Master Arm OFFIt’s not set up as a toggle switch.
-
Hi Mud,
Sorry I’m probably not explaining it well.
Only when I flick the switch up, does the master arm cycle.
So if the master arm is on, and I want to switch it to off, I have to toggle the switch down and back up(goes to sim)
Then down and back up again for it to go to off.Does that explain it a bit better?
-
Yup, I get it now
Can you check in the TARGET Script Editor Event Tester if the switch passes a command on both up and down?
If it does there, my guess is that something is wrong with the key file then in BMS.Br,
Mud
-
Yep, passed a command both up and down.
Replaced the Key file and all is back to normal!Thanks Mud!
-
This was a massive help in getting started with the Warthog HOTAS, thanks for sharing Mud
Had a few issues with the MFD’s which initially caused a USB disconnect error when running any of the TM profile scripts. Turned out to be caused by the latest Win 10 64 bit patch activating some USB power management settings behind the scenes. Once I disabled them all was well. Just waiting for the Thrustmaster flight pedals to arrive and then my setup is complete (for now, at least…).
I bought F4 when it first came out and can’t believe how far it’s moved on thanks to the dedication and hard work that the BMS Team have invested in it. Well done guys and thanks very much.
-
Post removed ––answer found—
-
Sorry for the late reply. I was on holiday.
While I’m happy you found the solution. It may have been a good idea to leave your problem and solution right here in your post, as others may also encounter it as well.
If you still have it in the back of your head, it may help others to edit your post againBest regards,
Mud
-
Hello MUD
I have a litle problem here that i hope you can help me with.
First im running with Win /.
Gear.
Thrustmaster Warthoc, 2 MFD, Bu0836X from leo bodnar:
I have installed Falcon 4 and BMS, on my E: drive.
Im running lates T.A.R.G.E.T dowloaded from thrustmaster.
I paste the Mud.Key in this folder E:\falcon bms\Falcon BMS 4.33 U1\User\Config
and the Mud.tmc in this folder C:\Program Files (x86)\Thrustmaster\TARGET\scripts
I Run the Target script and get this info.Running script: C:\Program Files (x86)\Thrustmaster\TARGET\scripts\BMS 4.33 - Mud.tmc
*** Allocated ProcInstances found from the previous run: use FreeProcInstance() ***
Mapped plugin module “C:\Program Files (x86)\Thrustmaster\TARGET\Plugins\sys.dll”
Compile Succeeded.
Physical USB HID devices managed by script!
Currently plugged USB HID devices[4]:
1: “F16 MFD 1” - “USB\VID_044F&PID_B351&REV_0100”
2: “Throttle - HOTAS Warthog” - “USB\VID_044F&PID_0404&REV_0100”
3: “F16 MFD 2” - “USB\VID_044F&PID_B352&REV_0100”
4: “Joystick - HOTAS Warthog” - “USB\VID_044F&PID_0402&REV_0100”
USB HID device “Throttle - HOTAS Warthog”(USB\VID_044F&PID_0404\7&9D9F79B&0&4) selected
USB HID device “Joystick - HOTAS Warthog”(USB\VID_044F&PID_0402\8&33A019CC&0&2) selected
USB HID device “F16 MFD 1”(USB\VID_044F&PID_B351\7&9D9F79B&0&2) selected
USB HID device “F16 MFD 2”(USB\VID_044F&PID_B352\8&33A019CC&0&5) selected
USB HID device with hardware id “VID_044F&PID_B10B” cannot be found
USB HID device with hardware id “VID_044F&PID_B687” cannot be found
USB HID device with hardware id “VID_044F&PID_B679” cannot be found
Virtual HID devices managed by script!
Connecting virtual joystick…Done
Device name set to Thrustmaster Combined
Connecting virtual keyboard…Done
Connecting virtual mouse (absolute axes)…DoneIn my Devicesorting.text the list is like this
{FFFF044F-0000-0000-0000-504944564944} “Thrustmaster combined”
{0402044F-0000-0000-0000-504944564944} “Joystick - HOTAS Warthog”
{0404044F-0000-0000-0000-504944564944} “Throttle - HOTAS Warthog”
{076306A3-0000-0000-0000-504944564944} “Saitek Pro Flight Rudder Pedals”
{B351044F-0000-0000-0000-504944564944} “F16 MFD 1”
{B351044F-0000-0000-0000-504944564944} “F16 MFD 2”
{10011DD2-0000-0000-0000-504944564944} “BU0836X Interface”Then i launch Falcon BMS and open the controler.
Keyboard
Thrustmaster Virtual Game Controller ( root)
Saitek Pro Flight Rudder PedalsIn BMS i load MUD and apply, and set controller in advanced.
Some of the botton in the throttle dont work and no key from Mud is showing up atall???Im really confused and hope you can help
-
I apologize if this is a noob question, but…
I cannot seem to engage NWS. I takeoff, turn around, then land. Once I am at taxi speeds, I tried pressing the pinky button and then also the ‘master mode’ mode button. Neither works. Am I to do something else?
thanks!
****edit
I saw an earlier post about devices being connected in a certain order. I’ll try that first and see where it takes me.
-
I tried to move the order of the input devices around, but could not.
I used JOYID and made sure things were in the proper order, but that did not affect the input devices order in the controller config menu.Any advice?
thanks. -
@Mud:
Sorry for the late reply. I was on holiday.
While I’m happy you found the solution. It may have been a good idea to leave your problem and solution right here in your post, as others may also encounter it as well.
If you still have it in the back of your head, it may help others to edit your post againBest regards,
Mud
That’s true. Cant remember how i fixed it exactly, sry . I had a problem where it would only see my joystick inputs, not the throttle inputs.
-
I tried to move the order of the input devices around, but could not.
I used JOYID and made sure things were in the proper order, but that did not affect the input devices order in the controller config menu.Any advice?
thanks.And all other buttons are working? Strange …
-
The MFDs are working, but that seems to be it.
Any idea what I can do? -
Hmm, I don’t know if changing the device order in the text file also changes the order in the config menu. So that may be irrelevant.
What I don’t understand is why none of the buttons on the hotas are working if you’ve selected the proper (Thrustmaster combined or root) in the config menu. -
Been using this profile with my Warthog for a few weeks now and enjoying it! Thanks for the hard work creating it. One question: can I use it with the default key file that is included in 4.33, without losing functions on the HOTAS?
Verstuurd vanaf mijn LG-H815 met Tapatalk
-
Hey ApacheHunter,
I fear that some functions won’t work properly with the default key file, as I’ve changed certain toggle switches to on and off states. For instance gear up and down position.
Best regards,
Mud
-
Ok, I understand. What I wanted is the [F1] key to activate the “ICP COM1” button instead of the “ICP Drift C/O” switch. Is this possible?
Verstuurd vanaf mijn LG-H815 met Tapatalk
-
Yeah, that’s absolutely possible. You’d have to edit the key file for this though.
“ICP COM1” is set to “NUMPAD /” in my key file. The only keys I often use for the DED are the numpad and arrow keys, so for me it made sense to have the COM 1 there.
Groetjes,
Mud
-
Thanks! I already changed it and indeed it works perfectly. I see why it made sense for you, but I have a tenkeyless keyboard…