Mud's Profile
-
That would have to be USB[0x83] for NUM LOCK, as it’s not a DX binding.
So DX83 becomes USB[0x83] in your case.
-
I am sure I will get my head round it soon… Thanks for the correction Mud I will pop that line in and see how I get on.
Once again many thanks for your time.
Aim
-
I have made the alterations… Are they correct now?
//Mic Switch
MapKey(&Throttle, MSU, USB[0x83]); // Teamspeak
MapKey(&Throttle, MSR, DX21); //Com 1 Transmit
MapKey(&Throttle, MSL, DX20); //Com 2 Transmit
MapKey(&Throttle, MSD, PULSE+L_ALT+USB[0x19]);Regards
Aim
-
I tried it and it didn’t
I have reloaded the previous file for now…
Aim
-
Hmmm, not quite sure why it wouldn’t work. Unless num lock is seen as a special key.
I’ll hook up my hotas this weekend and try it out myself.Mud
-
Try 0x53, that’s also num lock.
-
ah, cool thank you, Numlock was suggested as the hot key for Team speak as it serves no function on BMS, I will amend the tmc file I have been playing with, rename it and drop it into /user/config, then load it up on TARGET to see what happens, if it doesn’t work I will revert back to the file that does work with the Mic switch down ALT+V you kindly done for me Mud and keep trying til I crack it, I need to be self sufficient on this as I have no doubt further down the line, more personal changes will be needed and I need to do those myself, not keep relying on you, I am sure you are busy enough.
I do thank you for your replies and help I do think its a great profile….
AIM
-
I have tried again and changed the hotkey for team speak to ALT+V, thats Mic switch down… When I am in teamspeak and I click the Mic hatswitch down the transmit light flashes but then goes out, it doesn’t seem to toggle… Any ideas?
Just another quick question, I have only had the Warthogs three weeks and still trying to memorise all the presses etc, I keep hitting the chaff/flare by mistake with my thumb moves down lol
I am training at the moment and having a real problem slewing the cursor to the targets, could you explain the Slew control please, on the diagram it says
Short –-- Radar cursor reset
Long---- Radar cursor enable
Am I right in thinking that to be able to slew I have to press the button in for a long time, that then activates the slew function? If I hold it in for a short time it will reset to the middle of the FCR? If so I think I may be pressing it in by mistake as I am slewing around, I am not doing well with Mavericks due of this…
Regards
Aim
-
Rudder pedal question… I just got my HOTAS about a week ago and started using this (muds) profile. Everything was, and still kind of is working great, but I just got my rudder pedals today, and, if I have muds script running, my rudder pedals dont show as a selectable control axis. If I stop muds profile and restart BMS, they show up and I can assign them. Can somebody tell my why and maybe how to work around it?
-
You most likely comment out line 15 from my script:
So from
Configure(&TFRPRudder, MODE_EXCLUDED);
To
//Configure(&TFRPRudder, MODE_EXCLUDED); ```Sorry for the late reply btw. Busy, hectical life at the moment. Mud
-
Alright, so it appears that it indeed is working in the jet now with my current DeviceSorting (still shows nothing in settings). So hopefully case is closed, thanks
Hey
I have the same problemCan you please tell me exatly how you solved the problem?
Either way, I’ll exxplain my problem with the hopes that somebody will help me.
I’m using Mud’s profile with Warthog hotas. Also I got the TrackIR5 and saitek pro rudder pedals.
All axis are working in the BMS, all buttons on throttle are working and pedals axis.
I have set up the Mud’s profile following it’s instructions.But, there is a problem with my joystick. Joystick axis are all fine and working. But only one button is working, and that is the Zoom in/out. Everything else I “press” on the joystick has no effect in the BMS.
Do you know how to fix this? PleaseI’m on Update 4
EDIT: and the trim is working on joystick.
-
Cheers Mud! I figured it all out eventually (having some experience with TARGET Script Editor helped) and got my T-Rudder working as well. Now to learn how to fly…
-
Can someone please direct me to a solution? I have installed the Mud keyfile to the correct folder and .tmc profile. When I run the profile through TARGET I get no errors. When I go into setup for controllers, I load the Mud keyfile. After that, half of the buttons work. The ones that don’t are the DX buttons. I can assign some but there are some assignments that don’t show up after loading the Mud keyfile like everything for the stick. I am completely confused. Any help will be greatly appreciated.
-
Hey
I have the same problemCan you please tell me exatly how you solved the problem?
Either way, I’ll exxplain my problem with the hopes that somebody will help me.
I’m using Mud’s profile with Warthog hotas. Also I got the TrackIR5 and saitek pro rudder pedals.
All axis are working in the BMS, all buttons on throttle are working and pedals axis.
I have set up the Mud’s profile following it’s instructions.But, there is a problem with my joystick. Joystick axis are all fine and working. But only one button is working, and that is the Zoom in/out. Everything else I “press” on the joystick has no effect in the BMS.
Do you know how to fix this? PleaseI’m on Update 4
EDIT: and the trim is working on joystick.
Can someone please direct me to a solution? I have installed the Mud keyfile to the correct folder and .tmc profile. When I run the profile through TARGET I get no errors. When I go into setup for controllers, I load the Mud keyfile. After that, half of the buttons work. The ones that don’t are the DX buttons. I can assign some but there are some assignments that don’t show up after loading the Mud keyfile like everything for the stick. I am completely confused. Any help will be greatly appreciated.
Looks like we are in the same boat.
-
You should not test the buttons in the BMS config, as the DX ones will not fire there. They should work fine once you’re in the pit.
This has been covered quite a few times in this thread already.
If it is that “problem”, I’m not blaming you for asking. 58 pages to go through is a bit much
I’ll add a FAQ to post 1 some time in the near future.Mud
-
Hey
I have the same problemCan you please tell me exatly how you solved the problem?
Either way, I’ll exxplain my problem with the hopes that somebody will help me.
I’m using Mud’s profile with Warthog hotas. Also I got the TrackIR5 and saitek pro rudder pedals.
All axis are working in the BMS, all buttons on throttle are working and pedals axis.
I have set up the Mud’s profile following it’s instructions.But, there is a problem with my joystick. Joystick axis are all fine and working. But only one button is working, and that is the Zoom in/out. Everything else I “press” on the joystick has no effect in the BMS.
Do you know how to fix this? PleaseI’m on Update 4
EDIT: and the trim is working on joystick.
@Mud:
You should not test the buttons in the BMS config, as the DX ones will not fire there. They should work fine once you’re in the pit.
This has been covered quite a few times in this thread already.
If it is that “problem”, I’m not blaming you for asking. 58 pages to go through is a bit much
I’ll add a FAQ to post 1 some time in the near future.Mud
Mud,
That would be great, but that wasn’t my issue. They wouldn’t work in the sim at all. However, on a hunch, I checked the devicesorting.txt. Somehow, Thrustmaster combined was on the bottom. I moved it back to the top where it rightfully is supposed to be, and all is good on the test flight. I assume unplugging devices probably did that. Would it help to make that a read-only as well?
Adixylian,
You may want to do the same I did. The file is located in the User/Config folder of BMS installation. It’s a .txt file, and check that Thrustmaster Combined line is at the very top. Just cut and paste, save, then test in the actual sim. Not in the setup menu like Mud mentioned.
-
I made mine “read only” and haven’t had an issue since.
-
eagle7907,
Thank you! I was having the same issues, and your fix worked for me as well.
Cheers!
-
Hi
I have loaded your profile into script editor and run it , shows up in the bms GUI but no buttons are assigned when I press them
the key file is in the correct file too
I’m lost -
Try in the cockpit / 3d world.