Nvidia gtx 1060
-
Hmmmm something to try, might not help but this has helped me with many other games too is to remove the geforce experience software…. I have for the last 8 months or so only run the drivers and since then had ZERO issue in any games since… before removing it… has fps issues, had some games not work at all, and had some with random screen glitches. Give it a try… I know some people have it installed with no issues but for me, removing it took a world of pain away!
Just something to try!
I uninstalled Nvidia driver and gForce Exp. and then i make a clean install nvidia driver without gForce exp. but nothing change…UI is giving me less than 13 fps and screen is flashing…:(…
-
I uninstalled Nvidia driver and gForce Exp. and then i make a clean install nvidia driver without gForce exp. but nothing change…UI is giving me less than 13 fps and screen is flashing…:(…
Was a long shot buy worth the try…… Try running it window mode and see if this still happens… Just add -window at the end of the Target line which is in the properties for your game icon…
Sent from my SM-N910F using Tapatalk
-
Was a long shot buy worth the try…… Try running it window mode and see if this still happens… Just add -window at the end of the Target line which is in the properties for your game icon…
Sent from my SM-N910F using Tapatalk
I tried in window mode but nothing change :(…
-
Just a wild shot in the dark here, but if your GUI doesn’t work but the rest of the app does then the most obvious difference graphically is the aspect ratio. The GUI if 5:4 but the app is 16:9 …. on my AMD card I have an auto scaling setting that will attempt to fill the screen (I assume change 5:4 to 16:9, I haven’t tried it). I am wondering if you might have something like that happening which is causing the flickering. I guess one question would be is “what aspect ratio is your GUI?” Like I said, a wild guess… good luck, your problem must be frustrating. Oh, how do you read FPS in the GUI? I can only get it in BMS when in cockpit.
-
Shadow,
Inside the UI i have take less than 13 FPS so flight creation,dogfight option,campaing,etc are freezing and flash the screen all the time but when i enter the 3D(Actual flight in cockpit or orbit cam) there is no problem,everything is normal…
What i did;
-Delete all Nvidia driver and geforce experience
-Install Nvidia driver and geforce experience
-Default settings for Nvidia
But nothing change…My system is i7 6700k processor,EVGA GTX 1070 SC graphic Card,Gskill 16GB 2400MHz DDR4 Ram and my monitor is DELL S2716DG 2560*1440, 144HZ G-Sync.(it is connected via Display Port)
Sorry to hear its that bad, and yes it is a conundrum that might be hard to fix.
Have you enabled G-Sync or is it auto enable?
Do you have the option to connect the monitor via another cable type ? DVI ? or HDMI ?
-
Just a wild shot in the dark here, but if your GUI doesn’t work but the rest of the app does then the most obvious difference graphically is the aspect ratio. The GUI if 5:4 but the app is 16:9 …. on my AMD card I have an auto scaling setting that will attempt to fill the screen (I assume change 5:4 to 16:9, I haven’t tried it). I am wondering if you might have something like that happening which is causing the flickering. I guess one question would be is “what aspect ratio is your GUI?” Like I said, a wild guess… good luck, your problem must be frustrating. Oh, how do you read FPS in the GUI? I can only get it in BMS when in cockpit.
Sorry to hear its that bad, and yes it is a conundrum that might be hard to fix.
Have you enabled G-Sync or is it auto enable?
Do you have the option to connect the monitor via another cable type ? DVI ? or HDMI ?
Valky,
my aspect ratio is 16:9 and falcon default aspect ratio is 4:3 so i saw it with black bar.I will try strecth the screen and without strecth the screen but nothing change…:(Add : Fraps shows FPS in the UI.
Shadow,
I enabled G-Sync but it is same
I disenabled G-Sync but it is same again.Finally,
I connected the monitor with HDMI cable but again nothing change…:( -
-window does the same?
Στάλθηκε από το MI 5 μου χρησιμοποιώντας Tapatalk
-
Any profile in Nvidia settings or any changes at all at Nvidia settings?
Fraps I wouldn’t suggest it. New card new drivers ultra resolution… I don’t know how updated it is and how accurate.
U r sure 100% that u did a clean install? Clean install is different than simple Install.
U must select (tick) the clean install option when u install the drivers. Also a system restart is obvious after this.
In custom setup don’t install anything else but just the VGA driver. No gforce experience no Nvidia audio no 3d surround.
Also u might try older drivers .
Have u changed the DPI persent for fonts from windows settings?Στάλθηκε από το MI 5 μου χρησιμοποιώντας Tapatalk
-
Any profile in Nvidia settings or any changes at all at Nvidia settings?
Fraps I wouldn’t suggest it. New card new drivers ultra resolution… I don’t know how updated it is and how accurate.
U r sure 100% that u did a clean install? Clean install is different than simple Install.
U must select (tick) the clean install option when u install the drivers. Also a system restart is obvious after this.
In custom setup don’t install anything else but just the VGA driver. No gforce experience no Nvidia audio no 3d surround.
Also u might try older drivers .
Have u changed the DPI persent for fonts from windows settings?Στάλθηκε από το MI 5 μου χρησιμοποιώντας Tapatalk
I have no profile for Nvidia settings and i have no change anything
I am sure that i have a clean install and i just install Graphic driver (Untick HD Studio,Phyx, geForce Epx .etc.)
I have default DPI for fonts from windows settings…Finally now i think that i have to format the PC to solve this problem…:(…I have no no other senses…:(
-
Dear Friends,
I formatted the pc and install latest Nvidia driver Now everything is normal.
I take 144 Fps on the UI …
Thank you for your attentions.
-
Hello friends … after installing win10 updates I was a little bit determined to set the falcon. I’ve given it all the way I had, but I’m having trouble with the night flight. The lights on airbase the fly will disappear for a while after the start … just take off and the lights go out and when I return from the mission, I do not see them until … before the moment of sitting, or the use of the zoom will appear for a while … do you have any advice? Thank you … I still have the same set of I5 (6 cores) 2800mhz … Nvidia GTX1060 6GB … RAM 18GB … 2xmonitor … in configu set …per pixel lightning
-
Hello friends … after installing win10 updates I was a little bit determined to set the falcon. I’ve given it all the way I had, but I’m having trouble with the night flight. The lights on the fly will disappear for a while after the start … just take off and the lights go out and when I return from the mission, I do not see them until … before the moment of sitting, or the use of the zoom will appear for a while … do you have any advice? Thank you … I still have the same set of I5 (6 cores) 2800mhz … Nvidia GTX1060 6GB … RAM 18GB … 2xmonitor … in configu set …per pixel lightning
Hi there.
Well the runway lights stay on for a few time just AFTER you contact the tower on its proper frequency.
So be sure that you inform tower for your landing and the lights will be turn on ;).
Nikos. -
Hi … immediately below 30mil request ATC … the lights are off … before the actual touch, or again the use of the zoom path is displayed … thanks