Osan for vanilla
-
Great!
I was looking forward to seeing more modern OSAN base since 4.33 came out. Now its here!
-
Very nice!
-
Too bad we remade it alreadyā¦
Told u so
-
Nice work Earlybite.
-
@Switch:
Too bad we remade it alreadyā¦
Told u so
And that is your joy?
Best regards
-
What the **** do you mean?
-
Hello,
Nice work of yours!
This screen is really nice!
It looks really nice!
Maybe some work on the ground texture to make it a little bit better?
Regards,
Radium
-
Hello,
Nice work of yours!
https://www.benchmarksims.org/forum/attachment.php?attachmentid=35038&d=1520797996
This screen is really nice!
It looks really nice!
Maybe some work on the ground texture to make it a little bit better?
Regards,
Radium
Yes, there are some spots I like also very much.
And, yes, the ground texture(s)ā¦, how to explainā¦
Currently is from Google Maps with 50m.
IMO I have three choices:
-
A little make up (Iāve already repainted some of the lots of shadows from Google Maps)
-
A new map from Bing Maps (which has no shadows, but wide taxi lines) with 25m (Iāve already have it, the map)
-
Or all with own new textures for asphalt, beton. The āissueā is, that I do not have a āconstruction kitā, it is ā1:1ā from the sat map and some dds-files (8192*8192) holds ~ one of these taxi squares.
Currently I have six days remaining for Sketchup with 3ds export. I will finish it as good as I can, what Sketchup needs, and I will make a binary install (copy&paste) and will offer also LODās.
And then, I can make ground textures, step by step.I hope these explanation are not boringā¦
Thanks and
best regards
Earlybite -
-
Hi Earlybite,
what I see is really nice, too bad weāve been working on the same thing also.
Maybe for your next project, we need to try better coordinationā¦I will finish it as good as I can, what Sketchup needs, and I will make a binary install (copy&paste) and will offer also LODās.
For some of the new build 3D things would be great if you can provide them as *.skp, so we can have a look if we can get them into our new Osan objective?
Cheers
Biker -
Could not resist:
-
It is indeed a very nice work!
Did you made some LODs for damaged and destroyed buildings?
Regards,
Radium
-
It is indeed a very nice work!
Did you made some LODs for damaged and destroyed buildings?
Regards,
Radium
LOL Do you have a 60 hours day for me?
But, yes, I want to have some. E.g. for runways, I would love to see, if runways were hitā¦
Now, still two squares, and hopefully, I would love to have some buildings aside/between the runways. You know what I mean?
-
Runways do not need damaged or destroyed models. The code takes care of this as it creates the craters.
BUT
buildings do need damaged and destroyed models.
Creating such for me is easy IF the initial 3d model is correctly created.
The default way for Falcon is the wrong way for 3d models. Meaning walls are just a plane - polygon and not a box as they should be.
Earlybite send me some and Iāll try to make them.
IIRC Sketchup exports to FBX.
-
Runways do not need damaged or destroyed models. The code takes care of this as it creates the craters.
BUT
buildings do need damaged and destroyed models.
Creating such for me is easy IF the initial 3d model is correctly created.
The default way for Falcon is the wrong way for 3d models. Meaning walls are just a plane - polygon and not a box as they should be.
Earlybite send me some and Iāll try to make them.
IIRC Sketchup exports to FBX.
Never seen a damaged runwayā¦ The code replaces the normal runway model with some craters? Or how can you imagine that?
I had already a look at some buildings, like hangars, how they look, if they are damagedā¦
They have only another textureā¦, to little IMHO.
If, than I want to have real damaged buildingsā¦But now: First I will finish it, as good as I can, then I will see, how it goes further with me and Sketchupā¦
The Paid-Pro-Version is (currently) no option for me, because of the lots of bucks for it. But maybe I get a study versionā¦ <finger crossing?=āā>Best regards
Earlybite</finger> -
LOL Do you have a 60 hours day for me?
But, yes, I want to have some. E.g. for runways, I would love to see, if runways were hitā¦
Now, still two squares, and hopefully, I would love to have some buildings aside/between the runways. You know what I mean?
Well, I just ask.
No need to look like I am assaulting you.
Fact is that itās not a matter of 60 hours a day, but maybe a longer development time.
Have fun,
Radium
-
there was nothing assaulting in that Radium.
itās a pretty common joke.Fact is that itās not a matter of 60 hours a day, but maybe a longer development time.
which is the same, when you think about it
-
Well, I just ask.
No need to look like I am assaulting you.
Fact is that itās not a matter of 60 hours a day, but maybe a longer development time.
Have fun,
Radium
Oh , it was meant hearty! No problemā¦
The issue is, that I sometimes need three tries for one part of a building, because I cannot see. if a component shows its right side. If not, there will be a hole in the wall. That needs exporting, importing, looking, hmm ok, (sometimes) all turning 180Ā°, exporting, importing, looking, ok.
This is only one exampleā¦ And an export to 3DS needs meanwhile ~ one to two minutes, because some buildings have textures form seven dds filesā¦And yes, I want to have LODās for damage, destroyed, repaired, where repaired and normal should be same, or is there, or should be a difference for the model?
I also do not have distance LODāsā¦All fine.
Best regards
EarlybiteEdit:
BTW: What also takes a lot of time is to look on a 2D map, view from above, and trying to imagine how many floors this building has, or how looks the walls, the windows, the doors, how high are they, which color has the wall, etc., what is this, what is that.
E.g. I made a building and in the end I suddenly noticed that it is a āsmallā hangarā¦, windows out, rolling gate in. -
Normal/Repaired model = parent A texture set A.
Damaged model = parent A texture set B. So same UVW, just a different texture.
Destroyed model = parent B, only one set. -
Damaged model using just a different texture is like a quicky for me.
And a building being damaged with texture change wellā¦
Itās supposed it got hit.
Damaged with texture is like there was an external fire that got painting messed up.
Example windows must be missing or (and) doors, if not all some.
And some kind of structural damage is a must for my likes.Oh and all normal, damaged, destroyed can coexist in the same texture. Just go a bit higher on the resolution 4096 or 8192.
Earlybite man switch to 3ds max m8 u r making it way hard, for all of us time is THE major issue. So make the transition.
Sure will take u some time to adapt but in the long run it will save you a great deal of time.
Without damaged and destroyed models, specially for airbases the guys that will bomb after the first bomb runs, or the next mission will have some difficulty to distinguish which is which.Ī£ĻĪ¬Ī»ĪøĪ·ĪŗĪµ Ī±ĻĻ ĻĪæ MI 5 Ī¼ĪæĻ ĻĻĪ·ĻĪ¹Ī¼ĪæĻĪæĪ¹ĻĪ½ĻĪ±Ļ Tapatalk
-
Hi, Artyā¦
3DS-Max and me, how to say,ā¦
Neither 3DS-Max supports DPI scaling in the UI, nor 21:9.
I know how 3DS-Max looks already with 25601440ā¦, now, I have 34401440!
Guess what I can read in the UI!I would have to switch to 1920*1080, that is the resolution 3DS-Max is written for for the UI, every time I work on a model. I would have every time right and left great black barsā¦, hmm, 3DS-Max and, how to sayā¦, NO.
Or it should be, that Iām short to finger nails eaten, because that I absolutely want to model somethingā¦
I will find a way to use Sketchup (again)ā¦
Soā¦
All squares are, for the moment, done, runway lights are updated, taxiway lights function as desired, just making a little texture for an earthwork, then, maybe, still a little area near the top of 27, and maybe still one little area at near 09.
BTW: The stock object folder has really 1,2 GB?
My / A binary c&p-install has currently 1,7 GBā¦<umpf>And maybe a little area at the āGreat Courtā. There are IMO little āhillsā with, IMO, bunkers, IMO for munition. I think, that would be greatā¦
Happy eastern!
And best regards
Earlybite</umpf>