Cougar Throttle Hall Effect Potentiometer - Cubpilot Reincarnated!
-
I modded my throttle in a similar way to Scubapics . Rather than mounting a link ball on the throttle shaft I took the output shaft from a dead rc servo removed the gear and machined it to the same size and shape as the original pot shaft. With the tqs upsidedown with the handle at or very near the middle of it’s travel,I inserted the modded servo shaft into the original hole formerly occupied by the pot. Installed a 1" long servo arm in a vertical position. The whole affair fits neatly between the throttle shaft and the original pot mount. Install an identical servo arm on the hall sensor. Link balls mount on both arms at the 3/4" holes. Used a timed out linkage from my rc heli to connect.
I’ll try and get some pics . It actually turned out better than it sounds and I use 99.9% of the sensor’s travel split between max and min throttleDave
-
I modded my throttle in a similar way to Scubapics . Rather than mounting a link ball on the throttle shaft I took the output shaft from a dead rc servo removed the gear and machined it to the same size and shape as the original pot shaft. With the tqs upsidedown with the handle at or very near the middle of it’s travel,I inserted the modded servo shaft into the original hole formerly occupied by the pot. Installed a 1" long servo arm in a vertical position. The whole affair fits neatly between the throttle shaft and the original pot mount. Install an identical servo arm on the hall sensor. Link balls mount on both arms at the 3/4" holes. Used a timed out linkage from my rc heli to connect.
I’ll try and get some pics . It actually turned out better than it sounds and I use 99.9% of the sensor’s travel split between max and min throttleDave
Please do post the pics man. I know it’s a PITA to do that, but as good as your description is, it’s still open to reader’s interpretation. Thanks man.
-
Yeah about that. Sorry for the crappy cell phone pics
I used a Novotechnic RSC 2821-110-241-101 sensor ,one of a handful that I “harvested” from a dead case packing machine. A little large but it does fit and works well. Natively 5vdc supply so no issues with the cougar electrics. In the Foxy axis viewer app throttle is smooth as butter,in the pit I can adjust power by increments of 1lb if I am gentle
To set the position of the sensor bracket I installed the linkage, set both the throttle and the sensor to their mid points and used JB Weld to attach the sensor bracket to the TQS base.T fine tune the position I rotate the sensor in it’s bracket so the zero position of the sensor and the throttle coincide
Dave -
I know this is an old thread. I have just retired my 15 or more year old Cougar and purchased a Warthog. I have always wanted to do the Hall Effect upgrade but didn’t want to in any way alter the original product. I realize after looking at your images I just might be able to pull it off without chopping it up.
-
I know this is an old thread. I have just retired my 15 or more year old Cougar and purchased a Warthog. I have always wanted to do the Hall Effect upgrade but didn’t want to in any way alter the original product. I realize after looking at your images I just might be able to pull it off without chopping it up.
and thats the beauty of this mod
-
Compared with the Vipergear sensor, that looks like a whole lot of work.
-
Best part of this mod is it didn’t cost me a dime. I also didn’t want to alter in any irreversible way. So now my throttle has the same precision as my FSSB modded stick, and I have the original gimbals as spare parts jus in case. As for the work, a little fiddly, but worth it.
Dave
-
So will this mod to a Cougar throttle be compatible with the TUSBA? My stock pot is a little spikey after 15 years, but I love the newfound TUSBA functionality.
-
So will this mod to a Cougar throttle be compatible with the TUSBA? My stock pot is a little spikey after 15 years, but I love the newfound TUSBA functionality.
I don’t see why not. If the TUSBA works with a standard Cougar throttle, it should work with this. Have you asked the guys at TUSBA?
-
I read that Cubpilot Ernie is an obituary, that was a sad news since I corresponded with him. Anyone here know where we can order a microstick?
-
I use TUSBA R1 with VIPERGEAR hall sensor TQS mod combined with warthog stick and it works like a charm. Easy installation and high enough precision.
-
This only also seems really nifty
https://forums.eagle.ru/showpost.php?p=3670630&postcount=55 -
I use TUSBA R1 with VIPERGEAR hall sensor TQS mod combined with warthog stick and it works like a charm. Easy installation and high enough precision.
where can I find it and does it work for the F-16 HOTAS Cougar Throttle?
-
vipergear.eu for hall sensor
realsimulator.com for TUSBA
Yes it is compatible. I use cougar throttle with VIPERGEAR hall sensor connected via TUSBA r1 to a usb port and a warthog stick. -
thanks for the info., but how come the A-10 flight stick looks exactly like the F-16? I thought the thunderbolt is a very older plane
-
Because the entire A-10C fleet underwent an Precision Engagment upgrade from 2005-2011.
New sensors, SATCOM, IFFCC, all-weather capability, ECM, smart bombing targeting… along with the F-16/F-15 HOTAS mix. Aircraft receiving this upgrade were redesignated A-10C. -
yes I can see pictures of it on the net now, pretty successful flight stcik
-
vipergear.eu for hall sensor
realsimulator.com for TUSBA
Yes it is compatible. I use cougar throttle with VIPERGEAR hall sensor connected via TUSBA r1 to a usb port and a warthog stick.I have cubpilot hall sensors and they are fantastic, never failed. Its the microstick that I am looking for, Thurstmaster are slow even after I sent them the amount
-
Had problems with mine too. I spayed the MS assembly with contact cleaner and that helped for a while. Eventually it crapped out on one axis. I harvested a thumb stick from a PS3 controller but they weren’t quite the same. On closer inspection I noticed that the pots are similar so I bit the bullet. Gently squeeze the two tabs in and pry the pot away from the metal part (watch out for the loose internals of the pot) . Desolder from the board and repeat for the Microstick board . Caution one pot has traces on both sides of the board so soldering is a bit tricky.Problem solved.
Dave
-
If I disconnect the mini board attached to the micro stick without disconnecting the cougar from the PC first, would that total burn and ruin the mini board?
because I replaced the micro stick and there are no signals