Waichou's Helios profile (based on Weeopops profile, thanks !!)
-
Hello Waichou,
Would like to try your profile also but link is not valid.
Thanks
-
Hello, Can anyone explain this strange behavior to me? Only yame client works
everything perfect. With Helios I have the problems with the CPD panel.Greetings from the Rhön
Thanks Waiochs and Ice und Weeopops .
Hi powerman128, I had a similar issue too, can you check if on Yame / Client / Misc page the “Use with a touch screen” is activated ? If yes, try to uncheck it, there was some trouble for me (it was experimental on the Yame manual).
Tell me if it works ! -
@nik:
Thanks for your advice. In helios two callbacks on/off where missing. Now I ‘ve got a lot of fun.
best regards from the balticsea to the rhön.
Nik
Hallo Nik, du musst folgendes ändern:
Die Schaltfläche “Button CPD Panel Off” On Panel-Tasten hat den falschen Tastenbefehl
Falsch “LSHIFT + LCONTROL + N”
True “LSHIFT + LALT + N”Grußworte aus der Rhön [/ QUOTE]
Hi nik, I have the same problem too, can you explain me how you managed to resolve it, I am not sure to understand what you changed in Helios ?
Thanks !
-
Hello Waichou,
Would like to try your profile also but link is not valid.
Thanks
Link updated
-
-
Hi powerman128, I had a similar issue too, can you check if on Helios / Client / Misc page the “Use with a touch screen” is activated ? If yes, try to uncheck it, there was some trouble for me (it was experimental on the Helios manual).
Tell me if it works !Hello Waichou, you mean of course Yame64. Great, that was the solution. Now everything works fine.
Thank you! -
Hi nik, I have the same problem too, can you explain me how you managed to resolve it, I am not sure to understand what you changed in Helios ?
Thanks !
Have for CPD on, Callback SimCBESOSB_BRTUP / LSHIFT CONTROL n inserted.
For CPD off, SimRadarGainDown / LSHIFT LALT n
YAME
Thanks again for your extensive work
Nik
-
Hello Waichou, you mean of course Yame64. Great, that was the solution. Now everything works fine.
Thank you!Yes of course, I mean Yame64 ! Cool it worked for you too !
-
@nik:
Have for CPD on, Callback SimCBESOSB_BRTUP / LSHIFT CONTROL n inserted.
For CPD off, SimRadarGainDown / LSHIFT LALT n
YAME
Thanks again for your extensive work
Nik
Ok thanks, I understand. But can you confirm me you did’nt use my Yame64 profile ? Because my keybindings are different, LSHIFT CONTROL n is for AIR SOURCE for me, be careful if you use your keyfile with my Helios profile, I made some modifications, so some actions on Helios can be different in BMS
-
Hello,
First post updated with two additions :
- New theater finished : Nordic
- correction in my profile for the CPD problem (see the previous post)
the link is active for one week (and after, on demand)
-
Ok thanks, I understand. But can you confirm me you did’nt use my Yame64 profile ? Because my keybindings are different, LSHIFT CONTROL n is for AIR SOURCE for me, be careful if you use your keyfile with my Helios profile, I made some modifications, so some actions on Helios can be different in BMS
Use my keyfile, because your keyfile causes problems with the German keyboard, I would have to change too much. An unsolvable problem has remained, the Tacan, UHF / VHF Tower & GPS are not triggered properly.
Once again,your profile is very good, thanks.
Edit
problem fixed, mistyped -
Thank you! but the link is not valid.
-
Link updated !
-
-
Hello waichou,
if got a question - are you working on a new helios profile for BMS 4.34? Here I would be particularly interested in the IFF panel.
-
the link is active for one week (and after, on demand)
So I see you’re following on the footsteps of Weepops.
-
Ho Waichou
Great work, tnx. I have one problem though: your profile is for two monitors while I am using three where the third one is my touchscreen. When I add a monitor to your profile all the bindings get lost. Can you help me here; would be greatly appreciated! Another problem is that I have lost my +F16 Gauge Pack" files due to de-installing Helios for the new version 1.4. Without the gauge pack there is no ICP. Where do I find these files???
Tnx for your help.
Bikeman -
@nik:
Hello waichou,
if got a question - are you working on a new helios profile for BMS 4.34? Here I would be particularly interested in the IFF panel.
Hi Nik, good news, my IFF panel is ready and functional, I will share my new 4.34 profile soon, lots of additions in it ! Be patient
-
So I see you’re following on the footsteps of Weepops.
It is not a choice, I use free Wetransfer so the link is available one week only, if someone has another solution feel free to share, I would be happy to share a permanent link. I always give a new link for each demand by the way.
PS : PutYawa, I don’t understand what do you want in this topic, all your posts here are only for negative purpose (first for the credits, now for the link, what will be next…), if you are really unhappy with what we do here, you should only ignore us, I really don’t understand what I have done to you ? It does not encourage to share something in this forum… I spent dozen of hours doing this and sharing with everybody wants to, I find that critisism is easy, but…
-
Ho Waichou
Great work, tnx. I have one problem though: your profile is for two monitors while I am using three where the third one is my touchscreen. When I add a monitor to your profile all the bindings get lost. Can you help me here; would be greatly appreciated! Another problem is that I have lost my +F16 Gauge Pack" files due to de-installing Helios for the new version 1.4. Without the gauge pack there is no ICP. Where do I find these files???
Tnx for your help.
BikemanHi Bikeman, you should be able to use my profile with 3 screen, the only things you need is to do properly the “reset monitor” function. You have to put the second monitor to a third monitor. I never tried, but it should work. I don’t have 3 monitors, so I can’t really help you for this, sorry…
For the ICP pack, I don’t recommand to use the new version of Helios (I only use it for DCS), I don’t think it is totally compatible. Use the older version, there is nothing really useful in BMS in the new version. I tried to find where is the files you need, but I think it is hidden somewhere (F16gaugepack)