Falcon BMS Alternative Launcher (Easy Setup, Keep Joystick Assignments)
-
Could you check this line?
There is an issue sometimes this 9th “description” line changes its “=” number.SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 “======== 2.19 THROTTLE QUADRANT SYSTEM ========”
SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 “======== 2.19 THROTTLE QUADRANT SYSTEM ==”
Will adding ====== fix this?
Ive tried but I’m struggling to get it to save.
-
struggling to get it to save? what’s happening?
You add '='s and save but won’t apply to the file? -
When I assign two dials to the COMM Ch1 and COMM Ch2 axes, nothing happens in the simulator. The axes look fine in the launcher.
-
When I assign two dials to the COMM Ch1 and COMM Ch2 axes, nothing happens in the simulator. The axes look fine in the launcher.
Does it work in BMS SETUP->CONTROLLERS->ADVANCED->AUDIO CONTROL?
-
Yes, but it does nothing to the volume knobs (or volume) in the sim.
-
How about actual volume? IIRC in BMS switch does not animate if you set it to axes.
-
Is it just me or are you guys also unable to rebind awacs menu, wingman, etc ? ( basically in the progam… all the ones under keymapping with green text )
i made a mistake by rebinding my W key and now i have no access to my wingman menu
-
Maybe you need to rebind AWACS menu manually(by a text editor)… or start from stock BMS-FULL.key again(check User/Config/Backup).
I will make alt launcher to avoid rebinding AWACS menu in the next update. -
This is incredible work, I thank you from the bottom of my heart!
This really should be the default launcher, god knows how many people put BMS down due to the archaic button mapping with the default install/launcher. (You don’t know how many times I gave up in frustration)
I have been trying to get these controls right for weeks. I took no time at all to map the buttons I remembered, I did have a problem figuring out the shift but that was the part that I needed the most and once I had it down it became a breeze.
THANK YOU!!
-
I can’t thank you enough for your work on this project. I’ve tried in years past to manufacture a shifted state for that warthog throttle, never could. This works like magic, after I realized you must install your software on a vanilla BMS.
Could you explain in greater detail how to set up a simple on/ off switch with the two callbacks, Jammer on/Jammer off. I think I’ve tried every combination, but probably not. I must be missing something, help please.
I would really like to be able use this instead of throwing the toggle switch twice for off and on.
-
I can’t thank you enough for your work on this project. I’ve tried in years past to manufacture a shifted state for that warthog throttle, never could. This works like magic, after I realized you must install your software on a vanilla BMS.
Could you explain in greater detail how to set up a simple on/ off switch with the two callbacks, Jammer on/Jammer off. I think I’ve tried every combination, but probably not. I must be missing something, help please.
I would really like to be able use this instead of throwing the toggle switch twice for off and on.
I’ve done this already. Its really easy. If you have a switch that you want an on-off setup what you have to do is assign the on portion then when assigning the off portion you have to select release first then set the switch to on. So that will tell BMS that when this switch releases from ON then it is OFF.
-
Thank you, I will try this, although I don’t intend to use a four-way hat switch. I will try this with the EAC switch on the warthog throttle.
I apologize, I completely blew over your instructions. You can do incredible things with your software and it works! I just set the F-16 autopilot up completely with the autopilot toggle on the warthog. I use the autopilot on button, as the paddle switch, works great. I use the paddle switch as shift/modifier because I have short stubby small hands…As far as I am concerned, you made falcon history.
-
If Toggle Switch is DXn try this.
SomethingCallbackOn DXn INV : DN
SomethingCallbackOff Dxn REL INV : DN -
Hello, I don’t want to risk my installation Sayer all i had to do to make it work as i wanted, so a quick question before i try this launcher:
Can it invert throttle axis?
What’s the best way to restore launcher bc back to original?Couldn’t find the info, thanks for your time!!!
-
Hello, I don’t want to risk my installation Sayer all i had to do to make it work as i wanted, so a quick question before i try this launcher:
Can it invert throttle axis?
What’s the best way to restore launcher bc back to original?Couldn’t find the info, thanks for your time!!!
1st post!
Pay Attention before use.
The app will overwrite following setup files and the Registry of Falcon BMS.
The app will auto-generate backups of following files at User/Config/Backup.User/Config/axismapping.dat
User/Config/BMS - Full.key
User/Config/DeviceSorting.txt
User/Config/Falcon bms.cfg
User/Config/joystick.cal
User/Config/<callsign>.popI recommend make backups of the registry.
HKEY_LOCAL_MACHINE\SOFTWARE\BenchmarkSims\Falcon BMS 4.33 U1
or HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BenchmarkS ims\Falcon BMS 4.33 U1(Export .reg file via regedit.exe, For restoring just run reg file you have backed up.)
Also backup the launcher.exe</callsign>
-
-
Yes! I read about the backup but not the best way to restore!
-
-
You could use Joystick Gremlin to combine axis’s and invert them as well as adding curves. A great tool
-
Hi chihirobelmo and thanks for this excellent addition to BMS Falcon; it has saved me endless headaches rebinding axes whenever I launch the sim with unplugged devices!
I do have a difficulty with one key binding in particular, though. I used to use Snelle’s really good x55 profile with my HOTAS and he had a good use for the the ‘mousewheel’-thing on the throttle that I’d like to re-create in your software, only I can’t get it to work. The DX commands look like this:
SimDeselectOverride 93 -2 -2 0 0x0 0
SimDeselectOverride 221 -2 -2 0 0x0 0
SimSelectSRMOverride 93 -2 -2 0x42 0x0 0
SimDeselectOverride 94 -2 -2 0 0x0 0
SimDeselectOverride 222 -2 -2 0 0x0 0
SimSelectMRMOverride 94 -2 -2 0x42 0x0 0When I try and recreate this using Alt Launcher, I get this:
SimDeselectOverride 93 -2 -2 0 0x0 0
SimDeselectOverride 221 -2 -2 0 0x0 0
SimSelectSRMOverride 93 -1 -2 0x42 0x0 0
SimDeselectOverride 94 -2 -2 0 0x0 0
SimDeselectOverride 222 -2 -2 0 0x0 0
SimSelectMRMOverride 94 -1 -2 0x42 0x0 0…which doesn’t work properly because when rolling from MSL to DGFT overrides it doesn’t self-cancel like in Snelle’s behaviour above. To make with work with your launcher I had to manually edit the “-1” after SimSelectSRMOverride and SimSelectMRMOverride to a “-2” and save this as a new keyfile and manually change the keyfile once in BMS Falcon.
I may be mistaken but is it because the launcher won’t allow two different commands (SimSelectMRMOverride and SimDeselectOverride) to be bound to the same Invoke: DN key?
Can you help?