POH 0.8.1 for BMS 4.34 - Bug Tracker
-
@DUSTOFF17:
Just tried my first flight in the Sandwar Campaign and it seems as though the radio frequencies are a bit messed up.
I couldn’t communicate with the tower or my wingmen and then had a CTD halfway to target area.
Any ideas?
EDIT
So because all the Moroccan airbases TWR frequencies are only in VHF how do you communicate? When I press T to select the TWR comm menu and then make a selection it always transmits on UHF and I get no response from ATC. This obviously leads to the AI wingmen getting stuck at their spot on the ramp and having to continue a mission solo.Hello there.
Well this is due to the fact that right now POH use the previous NavAids of BMS 4.33.
Wait a little and you will have the new NavAids fully updated and conformal with BMS 4.34 ;).
Nikos. -
It’s Christmas time coming early again, :woohoo:
Thanks, Nikos, with best regards.
-
This post is deleted! -
Some sort of bug with the radio frequencies for Tower and Approach. Even when switching to Approach you can hear Tower chatter.
Some airbases have one freq. for all 3 channels.
this cause in .33 some airbases only had VHF instead of UHF. due to the Comms overhaul in .34 these basses needed an UHF.result is that for ground, twr, and DEP/ARR is the same freq.
hope this helps….
-
Hey Nuno Santos. First of all great job with a nice looking terrain, imo one of the most realistic one so far in BMS. Keep it up.
Me and my squad we’ve a problem to join into the campaign. We are able to join to the server, but not to the campaign.
Any hints on that one? -
Hi B3rNO.
Thanks, kudos to Joe Labrada and everyone else involved in the project.
I wasn’t able to test it online after the 4.34 conversion.My wild guess is, since with 4.34 128 segment theaters, like POH and EMF, have an issue with campaign loading saved game files, it might ve related with it.
As of now, we’re anxiously waiting for an update to 4.34 from the Dev team, since Falcas was able to spot the bug in the code and, hopefully, the next update will fix it.
Sorry, but at this time it’s about the only info I can give you.
Cheers!
-
And do you say it’s nothing this yours, dear Nuno?
Thanks a lot for this useful info by me, instead!
With best regards to you and all the awesome Iberia dev. team. I’m enjoying your hard work’s results a lot.
Gianni.
-
So we did a lan last weekend with 22 players in this new 434 POH theatre. We encountered some issues wich might be important here.
For the lan itself, i always setup a test mission, to see if players are able to join the server and test their hardware, before the actual lan missions begin. We found out that this mission itself crashed each time after about 25 minutes. The crashlogs from different players all showed the same error:
Falcon BMS.exe caused an EXCEPTION_ACCESS_VIOLATION in:
00000000400E020A Falcon BMS.exe, PrimitiveCollectionClass::GetBSPTexture()+10 byte(s), e:\wip\bms\svn\source\rel-4.34\graphics\bsplib\bspmeshbuilder.cpp, line 535+10 byte(s)
Exception handler called in UnhandledExceptionHandler.
Read from location 0000000000000000 caused an access violation.
Bytes at CS:RIP: 8B 14 88 81 FA 0F 27 00 00 75 0D 48 8B 05 FC 34We went looking for this error on the forums and found that the balkans theatre has had a similar problem. Further deduction we’ve cautiously concluded that there could be a problem with the mig21 model or texture. The test mission was the only mission that actually had a mig21 in it, so we went ahead and tested with one of the actual prepared missions.
The actual lan missions themselves seemed much more stable. However not without problems of spontanious crashes to desktop without actual notifications of the crash itself. You just switch to desktop and BMS is nowhere to be found anymore.
Also had lots and lots of people unable to move their throttle, but i believe this is an 434 mulitplayer issue and not really a theatre issue.
Another thing i also noticed: I like to use the VMT tool a lot for briefings on the lan. There is an early, early version that is able to load 434 mission files. However on the POH theater it fails. Not sure where the fault is, POH or VMT, but i thought you should be aware of it none the less.
I would like to stress that we aren’t actually able to tell if the issues are 434 or POH related. However we did test the lan network by flying in KTO for an hour with 22 people and encountered no problems. When doing the same in the POH theater with the simplest mission we could think of resulted in crashes around the 30 mins mark.
The network was setup using direct connections to a gigabyte switch, with serverhostall set to 1, and all object density set to max on all players.
server computer has a 9900k proccessor, 2080 RTX TI card, 32GB memory. it didnt even break a sweat.
to be sure we also tested with serverhostall set to 0, made no difference.
bandwith on clients was set to 4096 for up and down. Using the alt-O key in game allowed the server computer to display all the network connections. No client ever came close to 1000kbs, and the slowest ping we ever saw was 2ms. Most were at 0ms. No blue letters with desyncing were encountered. We saw a warp once, but only for a few seconds and was probably related to the client computer that saw it.
We used the exact same setup we used 6 months ago. We had a lan in 433 then, and used the POH the too. (i believe i posted about it). That ran rock solid, no problems at all.
Our squadron really loves your theatre. It is fantastic and we are going to fly more of it. I hope we can help solve this stability issue we encountered. Depending on it being a POH issue or BMS.
-
Thank you everyone for all the feedback!
cellphone
-
Guys,
Just installed POH for 4.34. Game doesnt enter at all not even to the menus. Black screen appears with the logo and then nothing. Any ideas? Ill try to see maybe its a problem on my end also
Thanks in advance -
Guys,
Just installed POH for 4.34. Game doesnt enter at all not even to the menus. Black screen appears with the logo and then nothing. Any ideas? Ill try to see maybe its a problem on my end also
Thanks in advanceMano hi.
IF you are on windows 7 and use an AMD graphics card, then you may have installed a driver later than the v17.7.1.
Just uninstall it and use the v17.7.1. This fix similar issues with a lot of extra add on theaters, like POH.
Nikos. -
Mano hi.
IF you are on windows 7 and use an AMD graphics card, then you may have installed a driver later than the v17.7.1.
Just uninstall it and use the v17.7.1. This fix similar issues with a lot of extra add on theaters, like POH.
Nikos.Thanks Nikos, therefore i use Win10 pro. It doesnt load any of the theaters at all… something has to do with the card for sure ill check it again
EDIT: dx9display.dsp issue… fixed
-
Hello everyone, when I start the ramp at the Los Llanos air base, the plane appears inside a hangar and I can’t drag it.Thanks
-
Hello everyone, when I start the ramp at the Los Llanos air base, the plane appears inside a hangar and I can’t drag it.Thanks
Hi, Almax.
I’m assuming you’re running BMS 4.34U2, along with POH 0.8.1.We still haven’t updated the theater to U1/U2 standards, so there might be some issues that are not attended to.
Can you reproduce it and make a print screen, so we can take a look at which hangar you’re referring to, please?
Thanks!
-
Hello everyone, when I start the ramp at the Los Llanos air base, the plane appears inside a hangar and I can’t drag it.Thanks
Here I upload a photo of the hangar, also a strange noise is smelled, like engine. Thanks Nuno Santos
-
-
Have you called ground to remove the chocks??
-
Thanks, we’ll look into it. Could be that it may need an adjustment on the hitbox or radius values that might be causing the airplane to colide with it.
-
This post is deleted! -
https://www.facebook.com/alfonso.moreno.94849/videos/2701000460018878/
I upload a video, thanks again