MidEast theater 128 segments (for 4.35 U3)
-
Does CTD occur after loading the mission at the time of entering the 3D environment?
Or occurs when using JPP233?
You obviously added JP233 to the squadron - with the help of editing the database, did you make any other changes?
At the same time, you do not use the on / off visor?You wrote that this has already happened with the Mirage planes, where can you read about it ?, perhaps there is a solution in that topic.
-
Yes, the CTD occurs as soon as i load mission - both taxi and runway start.
re: the mirage CTD - this was mentioned in earlier on this thread, you fixed it in an update, so i have no idea what you did.
re: adding JP233 - the RAF GR1 comes with JP233 as installed. no addition was required by myself other than adding the squadron in the first place. I will try dumb bombs and get back to you just so we can isolate this.
re: visor - i am unable to get into 3D, so cannot set (or unset) a visor. if its on by default, is there any way to alter that behaviour?
I spawned in at Dharan and King Kalid - same result each time.
many thanks for your efforts troubleshooting. -
Yes, the CTD occurs as soon as i load mission - both taxi and runway start.
re: the mirage CTD - this was mentioned in earlier on this thread, you fixed it in an update, so i have no idea what you did.
re: adding JP233 - the RAF GR1 comes with JP233 as installed. no addition was required by myself other than adding the squadron in the first place. I will try dumb bombs and get back to you just so we can isolate this.
re: visor - i am unable to get into 3D, so cannot set (or unset) a visor. if its on by default, is there any way to alter that behaviour?
I spawned in at Dharan and King Kalid - same result each time.
many thanks for your efforts troubleshooting.Saudi Tornadoes King Kalid - have no JP233 at all, their main weapon М-117. So the problem is not in the armament.
As far as I know, The visor is disabled by default, but many people randomly have a CTD when it is turned on, a combination of ALT+V.
https://www.benchmarksims.org/forum/showthread.php?42832-Crash-Report-Printscreen-Leading-to-Crash&p=582252&viewfull=1#post582252Yes, the CTD occurs as soon as i load mission - both taxi and runway start…
At the time of CTD, you make any request ATC or do not work with the radio?
Or CTD occurs at the time of loading the mission, even before entering the 3D environment. -
The Tornadoes i mission commander-ed in are RAF GR1’s - a seperate entry from the RSAF ones. these ones come with JP233 as standard. the loadout does not appear to matter, but i am still testing.
I cannot interact with the visor or anything else as the game CTD’s during the loading screen.
I am able to load into the game using RSAF tornadoes. -
I beg your pardon. but i’m a little confused. Let’s clarify.
-
CTD occurs at the moment of the mission loading screen on the British Tornado GR-1.
-
CTD on the Saudi Tornado at the moment of the mission loading screen does not happen to you, right?
That is CTD happens before entering the 3D environment. This significantly narrows the search for causes.
-
-
In the ODS campaign, British tornadoes have a 56 hour delay.
When the squadron is activated, the main tasks are DEAD and BAI.
But even if we Add the flight of the OCA Strike. The aircraft receives a suspension from the M-117. (screenshots below)In the squadron’s warehouse, the stock of JP233 = 0 (OUT). Thus, this ammunition is not loaded onto the aircraft, instead, M-117 bombs are automatically loaded on the aircraft.
The JP233 ammunition is never load.Do you have it all differently, in the campaign, Tornado planes appear immediately (without delay)?
What task do they receive at the same time with loaded JP233?
With all this, what stock of JP233 is shown on the aircraft weapons loading screen? -
sorry - its happening to both even if i dont use a JP233 loadout.
-
sorry - its happening to both even if i dont use a JP233 loadout.
- CTD occurs at the moment of the mission loading screen on the British Tornado GR-1 and Saudi Tornado Right?
- Do you have in the campaign, British Tornado planes appear immediately? or 56 hours after the start of the campaign??
That is CTD happens before entering the 3D environment. Right?
-
correct. the CTD happens no matter what tornado i use - or even if i use an unmodified scenario. always at the loading screen.
-
I would strongly recommend to have a look to the database and ACDATA…
You need to align as much as possible to the current KTO database.
-
correct. the CTD happens no matter what tornado i use - or even if i use an unmodified scenario. always at the loading screen.
I still can’t reproduce.
Loaded 10 times: entered and exited the 3D environment on the British, Saudi and Italian Tornado. Do not catch СTD.Try 1) delete the Mideast128 Add-On folder completely.
And install the latest version of the theater cleanly. Try starting a campaign on the Saudi Tornado. -
Thanks. This appears to be happening on all my planes now. I’m going to switch theatres and reinstall as well, then get back to you.
Quite surprised given that I had got it working on Saturday night for a few hours :shrugs:
Sent from my iPhone using Tapatalk
-
Some time ago, there was a very rare case with CTD. related to the Pilot Logbook.
Read here: https://www.benchmarksims.org/forum/showthread.php?37874-Kuwait-Theater-tester-version-2-(434U1)/page19&p=543247#post543247 -
thanks. im afraid this didnt resolve the issue either. ill let you know how a resinstall goes shortly.
-
total reinstall should solve the problem
-
trying that now. will update you all with news.
-
a new airbase that need s a little correction (Qayyarah West airbase)
also, it would nice if dusk was corrected to around 8:00pm instead of 2:00pm because dusk in that region at 2:00pm is just impossible. There are about 5-8 hours difference between the BMS ODS dusk time and the actual one.
-
a new airbase that need s a little correction (Qayyarah West airbase)
In the last “Add-On Mideast128"4-35-2v7” - Qayyarah West airbase. Taxiway must have a name " Taxiway 34-16".
And has a corrected center of the model. -
fixed it, turns out my G29 causes a CTD if its plugged in at the mains, but the pedals and shifter still work without the wheel attached at the mains - so i can fly as i intended without it being on your end. now all i need to do is find a way to attach the 2250L tanks to the GR1 in-game and ill be able to make it to the targets
-
In the last “Add-On Mideast128"4-35-2v7” - Qayyarah West airbase. Taxiway must have a name " Taxiway 34-16".
And has a corrected center of the model./QUOTE]
that may be the case, I found out I have V6, never knew about 7. I’ll check it out.