Solved U3 performance issues
-
@oakdesign said in U3 performance issues:
@jumo213 FPS counter
Press Alt and C, Release Alt and C then press and release F within a secondJumo, I am running out of ideas, unfortunatelyā¦
Looking at your FPs counter, seems the problem is really GPU related, rendering is taking forever.
Very hard to say where this is coming from. But I know laptops with optimus have some extra work rendering to internal display.
Two things I can think of:
- plug into an external display and see if it helps (this will effectively avoid the blit from GPU to iGPU).
- In your setup, I see the output is quite different from the Resolution. Can you check if there is another option there?
-
@jumo213 said in U3 performance issues:
Strange the Nvidia control panel on my laptop does not have any of those settings?!
I think this is some sort of clue ā¦ fwiw I updated my Nvidia driver to 425.31 (~2019) and although the āmulti-display/mixed-GPUā option goes away, the ability to select a preferred graphics processor still remains.
Does Windows show you this option to āRun with graphics processorā¦ā when you right-click on Falcon BMS.exe?
-
As a sanity check, maybe try another game or a DX11 benchmark like
https://benchmark.unigine.com/heavenTo see if thereās something gone wrong, system wide, vs just BMSā¦
-
Just one other note ā¦ if I completely disable my Nvidia driver (DevMgmt.msc) and max out the poor integrated graphics on my old i7-4702HQ, I still get ~18fps if I disable all shadows, water mapping, shader effects, and use low-rez clouds.
Not great but itās well above 1-2 fps ā¦ so something seems very horked.
The high commit-charge and huge amount of non-paged-pool RAM use seems highly sus. But I donāt know what could cause that ā¦ memory leak from a driver, typically, but that would accrue over time not show up right after a rebootā¦ I am also out of ideas, at the moment.
-
stupid q but here goesā¦ why in falcon gfx it says display9? and why r u on 1024x768 res for 3D?
How many monitors you have on your system?
What are their native resolutions?but even if u have 3 monitors this doesnāt justify such low fps.
On which PCI express slot on the motherboard is your 1080 installed?
-
@arty said in U3 performance issues:
stupid q but here goesā¦ why in falcon gfx it says display9? and why r u on 1024x768 res for 3D?
Because heās running in fullscreen and if even if you have set output to your monitor and resultion and close the setup screen and come back it will be set to 1024x768 as that is what BMS forces the monitor resolution to while in 2d. Has been theat way with the output dropdown since it came with 4.35
The Display number doesnāt tell anything about the numbers of display. Mine shows also 6-9 even so only 3 Displays attached
-
@seifer said in U3 performance issues:
In your setup, I see the output is quite different from the Resolution. Can you check if there is another option there
Wondering that a Dev is asking that statement
See my answer above -
@oakdesign this doesnāt happen to me.
U say u have 3 monitors but u see 6-9. That is 4 monitors.So something funny goes on here, maybe some virtual displays enabled at some time and are left overs? I always see 3 (8 9 10) and I have 3 monitors.
yeap u r right on the 1024res I forgot now itās different.
-
@arty yes forgot my spacedesk virual monitor used for tablet as secondary monitor
-
General suggestions:
-
Make sure to install latest drivers from Nvidia for your GPU (If possible do a cleanup of old drivers etc)
-
In Nvidia panel where you can choose which GPU to run for which apps, select the Nvidia card for BMS (regardless of plugged in or not)
-
Set to Power management mode to āMaximum performanceā
-
Run some general graphic apps and check performance of your system, maybe the GPU is toasted or something? Do you get expected FPS in some benchmark apps?
P.S - Reported āVideo memoryā in Windows seem to be always the amount of VRAM + Half of the RAM. So in your case the 16GB is same as the system RAM amount, but itās just a coincidence. Video memory is reported correctly. GPUs can use system RAM when necessary and the drive decides how and what to put in system RAM (I assume that by resources definitions it gets an idea). Itās not that healthy for GPU to read resources from RAM, but sometimes itās a must. Not fun but also no chance to cause such reduction of FPS (Besides the fact there is 0 chances that 4.35U3 can utilize the 8GB of the 1080)
-
-
Just an observation. In reference to the screenshots for the NVIDIA Control Panel. I noticed setting are being done from the āGlobal Settingsā tab. I believe it would be best to use the NVIDIA āProgram Settingsā tab so you can specifically target BMS to use your NVIDIA setting automatically on startup.
Select a program to customize: C:\Falcon BMS 4.35\Bin\x64\Falcon BMS.exe
-
@maxwaldorf said in U3 performance issues:
@jumo213 very strangeā¦
I used to have a 1080 with a i7700k and I had 150 fps in TE and 40 on the ground on first day campaignā¦
There is an interference somewhereā¦
will be possible in the future for more fps in campaign? in the first campaign i have 30 fps, in TE i have 80 ,is there a solution or will be? i understand campaign is heavier and intensier and many things going on but i think its too heavy .
-
@vfp that is not really the canmpaign that is heavy, it is the number of objects that are in campaign. Check the benchmark TE and you will see your FPS drop a lot.
Having said that, yes, we are working to increase this. In fact, from U0 to U3 there is a 30-40% improvement already. But for low end systems, that is not enough: for example, a 10 FPS would become 13-14. 20 will become 28-30.
On my PC, I get steady 60 FPS in campaign, but FPS drop a lot if flying over a city with tracers. This is something I still need to take a look.
-
my pc is indeed low end but i am only at 1280X1024
i am happy for now, but i plan to upgrade when bms upgrades itself, and not for bms only, but campaign was always more demanding all those years , i really glad if you can increase perfonmance in this field -
Thank you all for your suggestions so far and apologies for the delay.
Can confirm the GPU is OK as Steel Beasts and DCS (at close to max settings) run with out any issue. Have also tried disconnecting the external display and running the game only on the Laptops built in screen but the issue was still there.
Re installed the game and restarted after instillation and re installation and re installed the video drivers but still the same low fpsā¦
Totally bumbed as i really enjoy playing this sim : (
-
@airtex2019 said in U3 performance issues:
@jumo213 said in U3 performance issues:
Strange the Nvidia control panel on my laptop does not have any of those settings?!
I think this is some sort of clue ā¦ fwiw I updated my Nvidia driver to 425.31 (~2019) and although the āmulti-display/mixed-GPUā option goes away, the ability to select a preferred graphics processor still remains.
Does Windows show you this option to āRun with graphics processorā¦ā when you right-click on Falcon BMS.exe?
No i do not have that option, im pretty sure my cpu does not have an igpu as it does not show up in device manager and i have never been able to use it for anything.
-
@arty said in U3 performance issues:
@oakdesign this doesnāt happen to me.
U say u have 3 monitors but u see 6-9. That is 4 monitors.So something funny goes on here, maybe some virtual displays enabled at some time and are left overs? I always see 3 (8 9 10) and I have 3 monitors.
yeap u r right on the 1024res I forgot now itās different.
mmh on my settings page it says display 17ā¦
Only have the inbuilt laptop screen and one external monitor.
-
This post is deleted! -
@jumo213 said in U3 performance issues:
No i do not have that option, im pretty sure my cpu does not have an igpu as it does not show up in device manager and i have never been able to use it for anything.
Wait what ā¦ the Intel HD 630 (integrated graphics) is visible in the Task Manager screenshot you posted, earlier.
Does DxDiag.exe show anything interesting? (Paste a screenshot here ā of both the āDisplayā and āRenderā tabs if it has both.)
-
@airtex2019 said in U3 performance issues:
@jumo213 said in U3 performance issues:
No i do not have that option, im pretty sure my cpu does not have an igpu as it does not show up in device manager and i have never been able to use it for anything.
Wait what ā¦ the Intel HD 630 (integrated graphics) is visible in the Task Manager screenshot you posted, earlier.
Does DxDiag.exe show anything interesting? (Paste a screenshot here ā of both the āDisplayā and āRenderā tabs if it has both.)
was going of a old and, apparently incorrect memory. The HD630 was there in device manager and i tried disabling it but that made no difference.
Also tried changing the priority in task manager to real time but still no luck .