Falcon BMS Alternative Launcher (Easy Setup, Keep Joystick Assignments)
-
Same issue for me. No bindings saved at all, as soon as I close AL I can re-open and everything is blank. Is there any method of forcing a “save” or “apply” ? Checked the file permissions and am running AL as admin. Also noticed the expected files do not change, update or even accessed…
Joystick=VKB NXT
Hotas-T1600I can bind everything through the BMS standard config so its not a game changer, but the AL UI is far superior….
-
What was the file and location to restore all AL settings. I can’t remember which one it is now.
-
It’s .xml files in User/Config
-
Thank you.
-
I have made a bunch of hardware and software changes recently and now I am having trouble with AL version 1.60:
—If I check the box labeled “Launch without any setup override.” then Falcon BMS (4.35.2) loads normally.
—If I uncheck the box and click “Launch,” then I get a CTD.
Any suggestions? Is there an easy way to clear out my AL config data and start fresh?
-
@sixpack Can you backup .xml files in the User/Config folder, send it to me, then delete them from your local?
-
@chihirobelmo said in Falcon BMS Alternative Launcher (Easy Setup, Keep Joystick Assignments):
@sixpack Can you backup .xml files in the User/Config folder, send it to me, then delete them from your local?
Can do. What’s the best way to send them to you?
There are 6 files I removed from my user/config folder.
I started up AL afterward and had to configure my throttle. After unchecking the box, I tried to launch BMS but got CTD again.
Now I see new XML files, but not for the throttle. Maybe the throttle is part of the problem?
-
@sixpack
Do you have a discord account?
If not you can use dropbox or google drive. -
-
Just wanted to say, what a brilliant program Chihirobelmo.
-
Working on a more brilliant thing…
-
@chihirobelmo
Let me take a wild guess…ummmm update the knee-boards in the cockpit automatically? -
-
Hi, Chiri, and Good Day to you. I was wondering if you would answer a question for me. I have been experimenting with setting up certain aspects of my Warthog HOTAS, specifically set up the slider as a landing gear handle. I did that with TARGET, but want to continue to do the bulk of the programming with AL.
When I’m running the TARGET profile, AL lists the throttle as “Thrustmaster Virtual Controller” instead of it’s normal " HOTAS-throttle". I can still set the axis’ via AL normally. So, AL seems to “see” the TARGET profile. However, I can not make any switch/button assignments to the throttle or the throttle base.
Do you have any suggestions? -
@drtbkj As I mentioned in the other thread, you need to program every other button/switch on the throttle base through TARGET as well. The reason it doesn’t see any of those buttons is because your TARGET profile doesn’t include any of them.
Best course of action would be for you to load a full profile into TARGET and then just alter the bit relating to the Slider, leaving all of the other buttons functioning.
From what I remember messing with TARGET it should include some default profiles for you to mess with. -
@sobo-87 said in Falcon BMS Alternative Launcher (Easy Setup, Keep Joystick Assignments):
@drtbkj As I mentioned in the other thread, you need to program every other button/switch on the throttle base through TARGET as well. The reason it doesn’t see any of those buttons is because your TARGET profile doesn’t include any of them.
Best course of action would be for you to load a full profile into TARGET and then just alter the bit relating to the Slider, leaving all of the other buttons functioning.
From what I remember messing with TARGET it should include some default profiles for you to mess with.Thx, Sobo. I see what you’re saying. Just as AL overrides the UI, TARGET overrides both
-
@drtbkj Well, I would say TARGET goes between your hardware and AL/BMS rather than overwriting anything. When TARGET is running if you press button 1 on the controller, TARGET intercepts that signal, looks at the profile and checks to see what it should do. If the profile says activate DX Button 1 on the “Virtual Controller”, then that’s what it’ll do. If it says press K on the keyboard it will do that etc.
This is why if you don’t have a programmed function for that button in the TARGET profile, it will do nothing. It’s been years since I messed with TARGET but I remember there being a default profile that had all the buttons assigned and working like a “normal” controller. That would be the best place to start.
And remember its not programming anything ON the actual hardware, its simply a software layer that translates the signals from the hardware to whatever you want. This is why it only works while the software is running.
-
@sobo-87 said in Falcon BMS Alternative Launcher (Easy Setup, Keep Joystick Assignments):
@drtbkj Well, I would say TARGET goes between your hardware and AL/BMS rather than overwriting anything. When TARGET is running if you press button 1 on the controller, TARGET intercepts that signal, looks at the profile and checks to see what it should do. If the profile says activate DX Button 1 on the “Virtual Controller”, then that’s what it’ll do. If it says press K on the keyboard it will do that etc.
This is why if you don’t have a programmed function for that button in the TARGET profile, it will do nothing. It’s been years since I messed with TARGET but I remember there being a default profile that had all the buttons assigned and working like a “normal” controller. That would be the best place to start.
And remember its not programming anything ON the actual hardware, its simply a software layer that translates the signals from the hardware to whatever you want. This is why it only works while the software is running.
Thanks for the clarification, Sobo.
-
@drtbkj No problem! I hope I vaguely make sense lol. I remember it confusing the heck out of me when I first started fiddling with it many moons ago.
-
-
Hello! I’m using the newest version 2.0 from Github. Trying to map my new Winwing F16Ex throttle using AL. Buttons on the base of the throttle are registering but aren’t mappable. For instance, I can flick the physical 3 way switch that I intend to use for Autopilot Roll functions and see that AL recognizes that I’m flipping between the different unbound DX functions in its log readout, but once I double click the keybind to try to map it, it won’t bind it.
-
@ghastlytt does this thing have >32 buttons?
What does your DeviceSorting.txt file look like, for this setup?
-
@airtex2019 It does, yeah. I recognize that BMS is/was limited to 32 buttons per device. I guess my real question is, does/should the 2.0 version of Alt Launcher work around that limitation since it is telling me that the function is unassigned in the bottom left? The 1.6 version of AL just doesn’t recognize that button at all.
The firmware for this particular device can be split into 4 virtual devices in windows, so I can work around this. I’m just trying to prevent having more identically named devices everywhere.