Morphine's Profile For 4.37
-
There was an issue with the master arm switch in Target files. It’s been fixed and the files and dropbox have been updated. Try downloading the files again from dropbox.
-
@Gastone said in Morphine’s Profile For 4.37:
And if you don’t like them they are easy to change, now that they have been marked in the profile.
Ιt would be very useful for those of us who are not familiar, if you could make a guide with pictures on how we could change or add some buttons. For example, I would like to set zoom in and zoom out. Unless it exists somewhere and I haven’t seen it.
-
Hi Gastone,
I just check and the master arm works.
I have followed your instructions to the letter and the paddle shift still does not work.I load at TARGET: Morphine BMS 437 Paddle.swap.tmc
I load at SETUP Controllers in BMS: Morphine_BMS_435_FullWhen I press Paddle Switch it shows: Pinky switch (DX SHIFT)
I did a deeply check and do not work TMS or DMS. In the case of DMS I can not use IFF (TMS LEFT).
In Device Sorting I have:
{FFFF044F-0000-0000-0000-504944564944} “Thrustmaster Combined”
{FFFF044F-0000-0000-0000-504944564944} “F16 MFD 1”
{B352044F-0000-0000-0000-504944564944} “F16 MFD 2”
{0402044F-0000-0000-0000-504944564944} “Joystick - HOTAS Warthog”
{0404044F-0000-0000-0000-504944564944} “Throttle - HOTAS Warthog”
{B679044F-0000-0000-0000-504944564944} “T-Rudder”I have the thrustmater Rudder and I am using the same previous instruction.
If you have an idea on what is going on, more than welcome. Otherwise I will keep what I am using that works perfect.
-
Sorry,
there is a erratum I load BMS 437 morphine full.key in BMS
-
I’m having a hard time understanding what the issue you’re having is.
The expected behavior for the Paddle swap profile is
- Press and Hold Paddle.
- Press DMS right
- The waypoint increases
Or
- Press and Hold Paddle
- Press DMS Left
- The Waypoint decreases
Without out the paddle held, DMS and TMS should function normally.
If this not the case, it looks like the target software is not working properly on your system. When the profile runs. It should hide the Joystick and throttle from windows.
If you open the windows joystick panel with target running. All you should see is thrustmaster combine, the MFDS, and your rudder pedals. If you see the throttle or joystick and thrustmaster combine. The profile will not work.
-
Thanks Gastone, I will follow your instrucctions, I will edit the device sorting and eliminate the joystick and the throttel.
Related to the paddle swap I am just doing what you say, I press and holdmte Paddle.
About TARGET is a bit strange because TARGET is working with 4.46 and with 4.37 wit the profile based on your 4.34
Thanks for your patience and I will let you Know
-
Hi Gastone,
I followed your instructions, I modified the device Sorting and run your TMC file in Target and your Key File in BMS.
When I fly everything run OK , TMS, DMS,etc. But as soon as I push Paddle swap , for example: Press and Hold Paddle, Press DMS right. nothing of the Joystick work properly. In the case of the throttel is just the opposite still work perfect.
By the way I openned Windows after run TARGET and everything looks ok, it shows what you said.
Not said before but I also included set g_nHotasPinkyShiftMagnitude 512 in Falcon BMS User.cfg
Not sure if you check the functioning of the Paddle in your files, I guess so… no idea why this mess
-
There was this really weird bug with the paddle swap profile. It was some kind of compiler issue related to the comments. Anyway, I fixed it, tested all the functions then updated the dropbox link on the front page. It’s also included below. Thanks for your feedback, and helping to get this sorted out.
https://www.dropbox.com/sh/6ne27l56c1iuyiv/AAD4Rl8i1rgaB2mO3AHjHX4Ba?dl=0
-
I don’t seem to have a “Thrustmaster Combined” in my DeviceSorting.txt file.
-
@Finger-Jam-0 said in Morphine’s Profile For 4.37:
I don’t seem to have a “Thrustmaster Combined” in my DeviceSorting.txt file.
With the scripting running open the windows joystick control panel
You can also open the panel by clicking on the windows button in the lower left and typing joy.cpl
What do you see listed in the windows joystick control panel.
The only devices should be the thrustmaster Combined, the MFD’s (if you have them) and any other USB joysticks you have plugged in. Such as rudder pedals, ect.
If you can grab a screen shot of the target interface with the profile running that would be helpful.
You can grab a screen shot by pressing the windows key on your keyboard shift and s at the same time.
-
@Gastone Thanks to you for provide us with this profile, at least for me is a big help.
You deserve a bier!!! I will test tomorrow and let you know., today is a it complicate
-
@Gastone I see “Thrustmaster Virtual Game Controller (root)”.
BMS 4.36
Throttle FW: 23
Stick FW: 12
-
@Finger-Jam-0 said in Morphine’s Profile For 4.37:
I see “Thrustmaster Virtual Game Controller (root)”.
ouch. I though we’d seen the last of this…
“Thrustmaster Virtual Game Controller (root)”.
This a sign that Target isn’t working properly on your system. Target works by hiding the stick and throttle from your system and creating a virtual joystick, aka Thrustmaster Combine. Root shows up when target can’t hide either the stick or the throttleIt can be really hard to fix this issue because it could be be caused many different things.
The first thing I would do is- unplug the HOTAS,
- install the drivers again.
https://support.thrustmaster.com/en/product/hotaswarthogflightstick-en/
When it prompts you to plug in the device, change which USB ports the stick and throttle are plugged into. You can just flip flop them too. This may cause your system to recognize the HOTAS and it’s associated drivers correctly.
If it still doesn’t work. There maybe some software interfering with TARGET. The windows store, which runs in the background, was one that gave many people troubles. You can disable it and anything else you don’t from running in the background and restart.
I even had issues with Discord and Target when I was updating the profile. The Thrustmaster script editor wouldn’t load scripts with Discord running.
If all else fails you can just put “Thrustmaster Virtual Game Controller (root)”. At The top of device sorting and the stick and throttle at the bottom.
something like
“Thrustmaster Virtual Game Controller (root)”.
MFD 1
MFD 2
Rudder Pedals, if you have them
Joystick
Throttle.Just make sure you select the axis for the virtual root controller in the setup page.
That may work, no guarantees though. I also haven’t checked the compatibility with 4.36 too. -
Gastone
As promised I test and sorry for tha bad news, but still not working. Now, when I press Paddle nothing start to be mad like in the past, but nothing happen. I mean, the waypont do not increase for example.
In the same way, CMS or TMS do not work. I tried to launch flares and nothing happened or to activate the ECM. TMS in the same way.
Obviusly I downloaded from your last link.
-
@fvelazdem said in Morphine’s Profile For 4.37:
In the same way, CMS or TMS do not work. I tried to launch flares and nothing happened or to activate the ECM. TMS in the same way.
Obviusly I downloaded from your last link.I just downloaded the paddle swap from the dropbox, Started it in Target and it ran perfectly fine.
I recorded a video of BMS and the Thurstmaster Device Analyzer running. So that you can see the button press’s happen in real time. DMS + paddle functions as expected so does CMS and all of the other HOTAS commands.
I would try downloading the target files and the .key file then follow the steps on the first page. Be sure to recheck the Devicesorting.txt too. As the game will change it if you happen to start BMS without target running.If that doesn’t work try I’ll need some more information to try and help you.
-
Get a screen shot of Target with the profile running
-
Get a screen shot of the Joystick control with the profile running in Target.
Or a list of what’s in that panel when the profile is running.
-
Get a screen of the set up page in BMS.
Or list the controller and the Current Profile Selected. -
A screen shot of your devicesorting.txt
Or a complete list of what’s inside the file. The best way to open it is with notepad ++
-
-
Sorry forthe delay, I was out. Here you have what you requested:
In addition to all of this, the target version I am using is: V.3.0.20.826
Last point: I am using the following TMC file and key file:
Warthog_BMS_Full_5_434_Paddle.tmc
Morphine_BMS_435_full.Keywith this everything works. I am not using f6 MFD 1 or 2.
-
@fvelazdem said in Morphine’s Profile For 4.37:
In addition to all of this, the target version I am using is: V.3.0.20.826
Last point: I am using the following TMC file and key file:
Warthog_BMS_Full_5_434_Paddle.tmc
Morphine_BMS_435_full.Key
with this everything works. I am not using f6 MFD 1 or 2.-
You should update Target. The script for BMS 4.37 is was written in the latest version of target 3.0.21.910
The script runs and performs as expected with this version of Target. -
Are you trying to use the 4.37 profile in BMS 4.35?
-
-
Thanks Gastone,
I will try to update Target and test again
What I am doing is use the 4.35 profile for BMS 4.37 with the version of target that I mentioned before, everything works ok.
-
Already Installed last version of TARGET. I test:
1.- Devicesorting you Provided
2.- Load Throught new version of target :Morphine BMS 437 Paddle Swap.tmc
3.- Load in BMS: BMS 437 MORPHINE FULL.As soon I press and mantain paddle nothing work properly.
Then, I test:
1.- My previous Devicesorting
2.- Load Throught new version of target :WarthogBMS_Full_5_434_Paddle.tmc
3.- Load in BMS: Morphine_BMS_435_full.Keyeverything works correct. This is a mysteri
-
Gastone,
I compared the two files line by line:
Morphine BMS 437 Paddle Swap.tmc
Warthog_Full_5_434_Paddle.tmcAnd I did not found differences.
Based on that, I load through Target: Morphine BMS 437 Paddle Swap.tmc and In BMS: Morphine_BMS_435_Full.Key (mine).I test it and everything Ok, paddle, etc.
The only conclusion I can get is that BMS 437 Morphine Full.key has a conflict with both *.tms and this is the reason why the new profile do not work proppely.