Ice’s Falcon BMS Profile Updated for BMS 4.37
-
@Todd1215
I just created a Github account to try but I cannot reopen the issue, but I did left a remark. And thinking of what you mentioned if it was an one off issue then probably it was the way that I run Helios?
I always run TrackIR and Helios Control Panel first, then launch BMS, and after I click commit and BMS went to the actual in game resolution and loading, I click on the start button on the Helios Control Panel. This way when BMS finally loads up my touchscreen is also ready to fly. I can start the profile later, but not before, because the UI used to have a different resolution and it would not match the resolution I set in the profile. Could this be the reason for the problem?https://drive.google.com/file/d/1noUNVn6nAXVVHCERTw2hLd96CHGrHSGx/view?usp=sharing
This are the 2 Helios logs and 1 BMS log, where it crashed, all while we were doing the Laser Guided Bomb TE. Floating HUD while we are preparing the mission and unable to use the MFD on Helios. We lowered the gear and it could bring back the MFD for 2 seconds, then it went back to the floating HUD. We did it like 7 to 8 times and finally dicided to leave it and right after we hold down Pickle to be ready releasing the bomb BMS crashed.
-
@jacqueslees @Todd1215
I’ve reopened the https://github.com/HeliosVirtualCockpit/Helios/issues/598 issue on GitHub so that the discussion can be continued there which will make it easier to keep track of all the comments.
-
Ice’s Falcon BMS Profile Updated to 4.37-04
Updated 13 February 2023:
The first post has been updated with the latest version.
Please note the requirement for BMS Falcon 4.37 U1 and Helios Version 1.6.5900.1 or later.
Important: After installation run C:\Bin\UnblockFiles.exe to unblock all files.- Updated for BMS Falcon 4.37 U1 and compatible with Helios version 1.6.5900.1 or later. Note: Not compatible with earlier Helios versions.
- Requires “set g_bExportRTTTextures 1” to be added to the “Falcon BMS User.cfg” file found in \User\Config.
- Requires “set g_nKnobAccelerationDelta 0” to be added to the “Falcon BMS User.cfg” file found in \User\Config.
-
Hi, very good job at first -> @linknet. Could you please help me when i want split solo ECM panel to fit my 5 inch smart phone ? I tried to extract the code from config file and put it on solo profile but no luck. Thanks for any hint.
-
@Fox_518 Open the Combined Console panel then unlock and select the ECM panel. Then just copy and paste the ECM panel to a location that you have already selected. If this is to a completely new profile you need to install the Falcon Interface in that profile before copy and pasting else you will lose all of the bindings.
-
Any idea why I get this “warning”?
GadrocsWorkshop.Helios.HeliosProcessControl.ProcessControlInterface|Profile attempted to start a process ""C:\Bin\AutoDataUpdate.exe" "%BMSFalconPath%" "%HeliosPath%"" but this action is not permitted on this machine|
Doesn’t stop the profile loading.
-
@CriticalMass
Did you follow this in the Setup Guide?i
-
@linknet
Apparently not.I’ve recently got a new computer and I had copied the profile over - my assumption (I know) was that that was all that was needed.
I checked, and it wasn’t selected, but I can’t confirm fully as I don’t have access to my “pit” setup right now.
TANX!
-
Ice’s Falcon BMS Profile Updated to 4.37-05
Updated 05 March 2023:
The first post has been updated with the latest version.
Please note the requirement for BMS Falcon 4.37 U2 and Helios Version 1.6.5900.1 or later.
Important: After installation run C:\Bin\UnblockFiles.exe to unblock all files.- Updated for BMS Falcon 4.37 U2 and compatible with Helios version 1.6.5900.1 or later. Note: Not compatible with earlier Helios versions.
- Updated the key file to include the latest callback changes.
- Added all of the latest updated Korea charts.
- Updated the Comms Menu with the latest ATC changes.
- Requires “set g_bExportRTTTextures 1” to be added to the “Falcon BMS User.cfg” file found in \User\Config.
- Requires “set g_nKnobAccelerationDelta 0” to be added to the “Falcon BMS User.cfg” file found in \User\Config.
-
1st great work i really like it
can it be set to run in windowed mode so for example when prepairing in MP getting com or bugs sorted etc I could for example tab to discord or a different into focus? looking but not find if that is doable yet
-
Works great, very very fine work here, I love it.
Noticed one thing. the FQS “Wings first” goggle switch is not working.
Kukki
-
@Jim_H said in Ice’s Falcon BMS Profile Updated for BMS 4.37:
1st great work i really like it
can it be set to run in windowed mode so for example when prepairing in MP getting com or bugs sorted etc I could for example tab to discord or a different into focus? looking but not find if that is doable yet
It won’t run in windowed mode but you can Alt-Tab between it and another application providing you edit the profile and disable the Always On Top checkbox.
-
@kukki87th said in Ice’s Falcon BMS Profile Updated for BMS 4.37:
Works great, very very fine work here, I love it.
Noticed one thing. the FQS “Wings first” goggle switch is not working.
Kukki
I wasn’t aware it had an “FQS Wings first goggle switch”, can you please clarify.
-
@linknet said in Ice’s Falcon BMS Profile Updated for BMS 4.37:
@kukki87th said in Ice’s Falcon BMS Profile Updated for BMS 4.37:
Works great, very very fine work here, I love it.
Noticed one thing. the FQS “Wings first” goggle switch is not working.
Kukki
I wasn’t aware it had an “FQS Wings first goggle switch”, can you please clarify.
the 2 way toggle switch here in the picture, and the gear leaver do not sent the callback to BMS, so it will not raise or lower the gears. (can it be my kayboard settings?)
-
@kukki87th
Could well be your keyboard, if you using a Non-US Keyboard you would need to follow the “Non-US Keyboard Guide” section of the Setup Guide. -
@linknet ok that should work thank you
-
@linknet said in Ice’s Falcon BMS Profile Updated for BMS 4.37:
@kukki87th
Could well be your keyboard, if you using a Non-US Keyboard you would need to follow the “Non-US Keyboard Guide” section of the Setup Guide.Thanks, did that and now it works like its suppose to. THANKS. Great work you have done here.
-
Hi Linknet, I have been flying around extensively recently and so far it worked wonderfully. Thank you for closing the case we opened I have not experienced that anymore after deleting that redundant file.
There are things I noticed as well, like for RWR diamond float mode or Radio Altimeter, the switches position doesn’t correspond to the initial 3D cockpit setup, only after a recycle of the switch would they sync their position. Is this normal?
-
@jacqueslees said in Ice’s Falcon BMS Profile Updated for BMS 4.37:
Hi Linknet, I have been flying around extensively recently and so far it worked wonderfully. Thank you for closing the case we opened I have not experienced that anymore after deleting that redundant file.
There are things I noticed as well, like for RWR diamond float mode or Radio Altimeter, the switches position doesn’t correspond to the initial 3D cockpit setup, only after a recycle of the switch would they sync their position. Is this normal?
Thanks for the information. I’ve reworked both of the Threat Warning Panels and also the Radio Altimeter switch so their positions now correspond correctly to the start up mode. Modifications will be in the next update. If you find anything else wrong please just let me know.
-
Hey linknet, question on the charts. Is there a reason you have the rotary charts selector hidden? Is there a problem with manually selecting the charts if you know what you are doing? Since the FalconOnline theaters are unique Helios doesn’t recognize them even though there are theaters that could be used, such as the current Suez campaign they have going on. Helios doesn’t recognize it as the Israel theater even though it uses the same map and for the most part the same airport charts. Is there another way to get Helios to pull up the Israel charts other than enabling the rotary and moving the layer above the charts on it? Is there a theater list somewhere that can be edited which corresponds to the theater chart Helios will pull up?