NEW WINWING ICP
-
@Revientor It’s impressive, congratulations Reviiii, beautiful
-
The best video I found showing the displays is this:
It would still be interesting for the camera to be moved around the display to show viewing angles.
The displays appear to be quite high resolution.
-
@Tiger-0
Yes I will do it -
-
@Tiger-0
Tomorrow will be release the video that you requested enjoy -
While leaving for the office this morning, I received my copy.
Hopefully, I will assemble it and will report. Looking forward to it very much. Now., I just can not wait till I leave work… -
@Revientor said in NEW WINWING ICP:
@Tiger-0
Tomorrow will be release the video that you requested enjoyThank you!
-
@alippay2 said in NEW WINWING ICP:
While leaving for the office this morning, I received my copy.
Hopefully, I will assemble it and will report. Looking forward to it very much. Now., I just can not wait till I leave work…Enjoy!
Which store did you use? UK now has a store but it shows pre-order.
-
@Tiger-0 thank you. I am actually setting it up. It is not hard, just few buttons are not mapped.
I have a difficulty with
- DRIFT C/O - logic is escaping me how to set it up (what is “normal” and what is “release” - for this particular set-up)
- GAIN / LVL / AUTO -> somehow I am too blind and can not find in the key mapping menu.
Regarding you question:
I used their EU store as I shipped it to Prague.
Ordered on 21.01., shipped on 24.01. and delivered today, all from Germany.General comments:
The build itself is nice, lighter plastic, but quality is good. Buttons are fine, they will last. I really like the integrated display. And for the price, it is a no-brainer.I getting back from 4.34 so there is plenty of changes. But this is too good and I have no excuses anymore.
-
@alippay2 said in NEW WINWING ICP:
@Tiger-0 thank you. I am actually setting it up. It is not hard, just few buttons are not mapped.
I have a difficulty with
- DRIFT C/O - logic is escaping me how to set it up (what is “normal” and what is “release” - for this particular set-up)
- GAIN / LVL / AUTO -> somehow I am too blind and can not find in the key mapping menu.
Regarding you question:
I used their EU store as I shipped it to Prague.
Ordered on 21.01., shipped on 24.01. and delivered today, all from Germany.General comments:
The build itself is nice, lighter plastic, but quality is good. Buttons are fine, they will last. I really like the integrated display. And for the price, it is a no-brainer.I getting back from 4.34 so there is plenty of changes. But this is too good and I have no excuses anymore.
Drift C/O - what do you mean? The hardware switch is UP for ON (meaning the TVV is fixed and will NOT show drift). Mid setting is C/O OFF, meaning the TVV WILL show drift.
“BMS - Full.key”
SimDriftCOOn 121 0 0XFFFFFFFF 0 0 0 1 "ICP: DRIFT C/O Switch - ON" SimDriftCOOff 121 0 0XFFFFFFFF 0 0 0 1 "ICP: DRIFT C/O Switch - NORM"
To assign this to DX buttons, try this:
SimDriftCOOn <DX_BUTTON_ID_ON> -2 -2 0x0 0x0 0 "DX" SimDriftCOOff <DX_BUTTON_ID_ON> -2 -2 0x42 0x0 0 "DX"
…where <DX_BUTTON_ID_ON> is the ID of the ON position of the switch when you test it in the BMS config screen, minus 1.
e.g. if the BMS config screen shows button 400, then you put 399 here.
I just had a look in the keybinds, and FLIR GAIN/LVL/AUTO is a spare switch and not implemented in BMS. I think the switch on the hardware is working though, so you can assign this to something else.
-
Re: Drift C/O
Thanks, I will look at this tomorrow.Re: FLIR GAIN/LVL/AUTO
After I posted this, I checked the BMS Cockpit Interaction Guide and also found out that these switches, along with CONT scroll wheel are not implemented. However, in the AL, could actually assign axis for all four scroll wheels.See below:
I am just getting back to basics, reading manuals, and starting engines. It is fun.
I have to say that with TQS and ICP, this is much better experience then before. -
@alippay2 on how to set the C/O switch. Read up in this thread about 16 days ago. It is explained exactly how to set it in the launcher. Works like a charm. For the CONT dial, I use that axis to dim/brighten my HMD
-
@Quasi_Stellar said in NEW WINWING ICP:
@alippay2 on how to set the C/O switch. Read up in this thread about 16 days ago. It is explained exactly how to set it in the launcher. Works like a charm. For the CONT dial, I use that axis to dim/brighten my HMD
https://forum.falcon-bms.com/topic/26386/new-winwing-icp/35?_=1706572234094
-
@Tiger-0 thank you. I knew there had to be a way to tag threads
-
@Revientor That was excellent! Thank you!!
-
-
@Quasi_Stellar said in NEW WINWING ICP:
@alippay2 on how to set the C/O switch. Read up in this thread about 16 days ago. It is explained exactly how to set it in the launcher. Works like a charm. For the CONT dial, I use that axis to dim/brighten my HMD
Thanks for the hint. I actually managed assign the keys as per the screenshot.
What do you suggest to use the GAIN and AUTO keys for?
Thanks again for your help. Much appreciated.
-
@alippay2 Ha!! Not a clue. Between this, my HOTAS, and MFDs, I’m button/switch rich.
-
@alippay2 Landing lights, master arm, laser arm, exterior lights, one of the HUD display options (e.g. night/day switch), etc.
-
@Tiger-0 This gives me a great idea!! I’ll look and see about binding the DED DATA Switch to GAIN/AUTO. Make for an easy way to throw the DED on the HUD during AAR. A round for the bar!!