Free for all: BVT control panel
-
I’m saving it as a different name so I don’t lose the original file, but I’m using a different letter at the end such as indexa. Then I change the original file to indexb and change the other file to index. That way if I need to switch back to the original I can. I have no problem with the original, even switching the name back and forth. But what I’ll try is making the changes and just saving the file with the same name to see if that works.
You can save your file under another name, but then of course you also need to set that page as start page in step 4b of installation guide in first post (see image)
-
I got it working now. Made the changes and saved it instead of save as. Works good now thanks!!!
-
I got it working now. Made the changes and saved it instead of save as. Works good now thanks!!!
Good to hear it works. Enjoy!
-
This works very nice.
If you want own layout just edit the panel picture with Photoshop or similar and adjust the keyfile.
Not yet found out how to get the panel 100% fitting on my IPAD screen. The original is bit bigger.
Edit: Got it……run Safari in fulscreen mode or use other browser. -
This works very nice.
If you want own layout just edit the panel picture with Photoshop or similar and adjust the keyfile.
Not yet found out how to get the panel 100% fitting on my IPAD screen. The original is bit bigger.
Edit: Got it……run Safari in fulscreen mode or use other browser.See my install notes at The end. Use save to homescreen in safari to launch full screen
-
See my install notes at The end. Use save to homescreen in safari to launch full screen
Weird, didn’t work for me.
But just did find other solution:
http://www.ispringsolutions.com/articles/how-to-make-a-webpage-full-screen-on-an-ipad.html
-
Weird, didn’t work for me.
But just did find other solution:
http://www.ispringsolutions.com/articles/how-to-make-a-webpage-full-screen-on-an-ipad.html
That’s weird. I’ve tested on iPad 1gen and latest 4.
Edit: The link you posted does exactly what I describe?
-
That’s weird. I’ve tested on iPad 1gen and latest 4.
Edit: The link you posted does exactly what I describe?
I have IPAD3 WIFI 16 Gb, Jailbreak.
Only thing you need to do is add words “to HTML5” to the shortcut and it opens in fullscreen.
No hightech, even simple Dutchie as me can do
-
I have IPAD3 WIFI 16 Gb, Jailbreak.
Only thing you need to do is add words “to HTML5” to the shortcut and it opens in fullscreen.
No hightech, even simple Dutchie as me can do
But I still don’t get what you mean by saying “Not yet found out how to get the panel 100% fitting on my IPAD screen” and later “Didn’t work for me. But just did find other solution: http://www.ispringsolutions.com/arti…n-an-ipad.html”
while my description, who doesn’t work for you:
iPad
-
Make sure your iPad is in landscape (horizontal) mode and not in portrait (vertical) mode
-
Open Safari
-
Surf to the IP you have set during step 4 of the installation on your pc by entering the IP in the URL bar and hitting enter or go.
-
Click on the icon to save bookmarks and choose “Add to homescreen”
-
Open the app on your iPad homescreen, now it’s fullscreen.
describes exactly the same as the URL you mention: http://www.ispringsolutions.com/articles/how-to-make-a-webpage-full-screen-on-an-ipad.html
PS: the “to html5” addition does nothing at all, it’s just the title for the app icon on your homescreen…
-
-
But I still don’t get what you mean by saying “Not yet found out how to get the panel 100% fitting on my IPAD screen” and later “Didn’t work for me. But just did find other solution: http://www.ispringsolutions.com/arti…n-an-ipad.html”
while my description, who doesn’t work for you:
describes exactly the same as the URL you mention: http://www.ispringsolutions.com/articles/how-to-make-a-webpage-full-screen-on-an-ipad.html
PS: the “to html5” addition does nothing at all, it’s just the title for the app icon on your homescreen…
Pls check PM.
-
I can’t get fullscreen on my android tablet unfortunately. Can’t figure out how to do it. I even used your instructions. Hopefully, I can figure it out, but I’m loving it so far.
-
I can’t get fullscreen on my android tablet unfortunately. Can’t figure out how to do it. I even used your instructions. Hopefully, I can figure it out, but I’m loving it so far.
Thx, glad you like IT.
How i described IT was for iPad only unfortunately.
On android,
Do you have browser called dolphin? That supports full screen i think -
Ok, I can get that. Will give it a try, thanks
-
I am trying to reprogram the ecm enable button but the changes do not work it is like the location for that button are wrong. Any help would be aprreciated. I was able to reprogram one problem with it allready having to do with the numpad enter key and all went well but no matter what I put in for the ecm enable button it stays the same. Thanks
-
Here is the code im trying to change no matter what i put in it always does control 2 and i want shift 2 even put in shift 3 and still does control 2
<area shape=“rect” coords=“20,265,67,313” href=“javascript:macro(”+2");" alt=“ECM ENBL” title=“ECM ENBL”> -
I figured it out it was the ipad history that was not taking the change cleared the history and then the new command took hold.
-
A big thanx m8u just made my day. I just got a Balckberry Playbook and I was sad as I couldn’t make much use of it with BMS… Now I can with my 3 winCE pda’s and my android Tablet almost have a complete virtual Cockpit.
Sorry for neglecting your app for so long as I thought it was for iPad only…
You deserve the first place in my Arty’s Hot List at the Software for Mobile devices section…
Edit: wow this is very time consuming to setup…
At least the default keyfiles should be ready… Has anyone done them so to share them???
-
A big thanx m8u just made my day. I just got a Balckberry Playbook and I was sad as I couldn’t make much use of it with BMS… Now I can with my 3 winCE pda’s and my android Tablet almost have a complete virtual Cockpit.
Sorry for neglecting your app for so long as I thought it was for iPad only…
You deserve the first place in my Arty’s Hot List at the Software for Mobile devices section…
Edit: wow this is very time consuming to setup…
At least the default keyfiles should be ready… Has anyone done them so to share them???
Thx Arty,
Indeed, it takes a bit of work to get the keybinds personalized. I should have to find some time to match them with the default or Kolbe’s BMS keyfile
-
I have a bit of a big problem…
I’m trying to set it up according to my likes and my Key file and I have a vertical problem…
I’m trying to assign the Ctrl+NUMPADENTER key but it’s not working…
I gave other Numpad keystrokes and they work just fine… This one just doesn’t…
Could u please have a look at it? Is it me?the command I send is:
<area shape=“rect” coords=“588,193,657,261” href=“javascript:macro(”^{NUMPADENTER}“);” alt=“ICP ENTR” title=“ICP ENTR”>In the server app it shows that is receives the command and it shows ok as the other commands… but it’s not handed to Falcon…
I tested it with monsters app and it works just fine… strange.
-
I have a bit of a big problem…
I’m trying to set it up according to my likes and my Key file and I have a vertical problem…
I’m trying to assign the Ctrl+NUMPADENTER key but it’s not working…
I gave other Numpad keystrokes and they work just fine… This one just doesn’t…
Could u please have a look at it? Is it me?the command I send is:
<area shape=“rect” coords=“588,193,657,261” href=“javascript:macro(”^{NUMPADENTER}“);” alt=“ICP ENTR” title=“ICP ENTR”>In the server app it shows that is receives the command and it shows ok as the other commands… but it’s not handed to Falcon…
I tested it with monsters app and it works just fine… strange.
I have the same issue. It’s like Falcon doesn’t recognize numpadenter. Even when I hit the actual numpad enter button on my keyboard it doesn’t recognize it in BMS UI.